:)
Hello,
Please, help me in finding complete information
regarding to Ceramic Hybrid Ball Bearing.
Thank you. ....etc

[:=Read Full Message Here=:]

Ball Piston machines


From the day machines with reciprocating piston has come into existence efforts have been undertaken to improve the efficiency of the machines .The main drawbacks of reciprocating machines are the considerably large number of moving parts due to the presence of valves , greater inertial loads which reduces dynamic balance and leakage and friction due to the presence of piston rings . The invention urges has reached on Rotary machines .

One main advantage to be gained with a rotary machine is reduction of inertial lo ....etc

[:=Read Full Message Here=:]

A patented new power machine concept has been designed and analyzed for production, and proof of principle subscale tests have been performed, with positive results. The machine design concept is applicable as a compressor, pump, motor, or engine. Simplicity of design based on spherical ball pistons enables a low moving part count, high power to weight ratio, elimination of valve train and water cooling systems, and perfect dynamic balance.The new design concept utilizes novel kinematic design to completely eliminate inertial loads that would c ....etc

[:=Read Full Message Here=:]

Abstract:
new power machine concept has been designed and analyzed for production, and proof of principle subscale tests have been performed, with positive results. The machine design concept is applicable as a compressor, pump, motor, or engine. Simplicity of design based on spherical ball pistons enables a low moving part count, high power to weight ratio, elimination of valve train and water cooling systems, and perfect dynamic balance.

The new design concept utilizes novel kinematic design to completely eliminate inertial loads that w ....etc

[:=Read Full Message Here=:]

INTRODUCTION
Ball valves are most widely used valves for flow control in fluid flow lines for wide range of temperature changes (-200°C to 500°C).Most of the outlet valves of chemical plant storage were installed with ball valves for sudden closing and opening purposes. For petroleum and chemical plants it is very convenient to operate with ball valves.
Ball valves are used in situations where tight shut-off is required. The type of seat can vary with the valve pressure rating and m ....etc

[:=Read Full Message Here=:]

Introduction

From the day machines with reciprocating piston has come into existence efforts have been undertaken to improve the efficiency of the machines .The main drawbacks of reciprocating machines are the considerably large number of moving parts due to the presence of valves , greater inertial loads which reduces dynamic balance and leakage and friction due to the presence of piston rings . The invention urges has reached on Rotary machines .

One main advantage to be gained with a rotary machine is reduction of inertial loads and ....etc

[:=Read Full Message Here=:]

A ball valve (like the butterfly valve, one of a family of valves called quarter turn valves) is a valve that opens by turning a handle attached to a ball inside the valve. The ball has a hole, or port, through the middle so that when the port is in line with both ends of the valve, flow will occur. When the valve is closed, the hole is perpendicular to the ends of the valve, and flow is blocked. The handle position lets you 'see' the valve's position.

Ball valves are durable and usually work to achieve perfect shutoff even after years of di ....etc

[:=Read Full Message Here=:]

SILEX

SILEX is a free-space optical communication system which consists of two optical communication payloads to be embarked on the ESA Artemis (Advanced Relay and TEchnology MIssion Satellite) spacecraft and on the French Earth-observation spacecraft SPOT-4. It will allow data transmission at 50Mbps from low Earth orbit (LEO) to geostationary orbit (GEO) using GaAlAs laser-diodes and direct detection.

The SILEX Phase A and B studies were conducted around 1985, followed by technology breadboarding and predevelopment of the main critical ....etc

[:=Read Full Message Here=:]

From the day machines with reciprocating piston has come into existence efforts have been undertaken to improve the efficiency of the machines .The main drawbacks of reciprocating machines are the considerably large number of moving parts due to the presence of valves , greater inertial loads which reduces dynamic balance and leakage and friction due to the presence of piston rings . The invention urges has reached on Rotary machines.




One main advantage to be gained with a rotary machine is reduction of inertial loads and better dy ....etc

[:=Read Full Message Here=:]

A ball valve (like the butterfly valve, one of a family of valves called quarter turn valves) is a valve that opens by turning a handle attached to a ball inside the valve. The ball has a hole, or port, through the middle so that when the port is in line with both ends of the valve, flow will occur. When the valve is closed, the hole is perpendicular to the ends of the valve, and flow is blocked. The handle position lets you 'see' the valve's position.

Ball valves are durable and usually work to achieve perfect shutoff even after years of di ....etc

[:=Read Full Message Here=:]