Photonic sensors, signal processors and communication technologies have emerged as viable alternative to electronics. Fiber optic sensors have advanced to an extent that they can be readily made use of in many applications. The different types of fiber optic sensors, components used in optical fiber sensing, sensor design and analysis, distributed\ multiplexed sensor schemes and the role of integrated optics are highlighted. With the advent of lasers and semiconductor optoelectronics, a great revolution in modern optics took place. Rapid develo ....etc

[:=Read Full Message Here=:]

Introduction
Direct generation of measurable voltages and currents is possible when a fluids flows over a variety of solids even at the modest speed of a few meters per second. In case of gases underlying mechanism is an interesting interplay of Bernoulli's principle and the See beck effect: Pressure differences along streamlines give rise to temperature differences across the sample; these in turn produce the measured voltage. The electrical signal is quadratically dependent on the Mach number M and proportional to the Seebeck coefficient of ....etc

[:=Read Full Message Here=:]

RFID systems have been sued in numerous applications like asset tracking, toll collection and libraries. The following seminar presents our on going research for the Auburn University Detection and Food Safety (AUDFS) project to use RFID technology combined with sensors for detection of pathogens in food. AUDFS aims to integrate the breakthrough in the detection of food borne illnesses with advances in wireless and biosensor technologies. The goal of the research is a system that can keep track of food products from initial production throughou ....etc

[:=Read Full Message Here=:]

Wireless Integrated Network Sensors (WINS) now provide a new monitoring and control capability for monitoring the borders of the country. Using this concept we can easily identify a stranger or some terrorists entering the border. The border area is divided into number of nodes. Each node is in contact with each other and with the main node.

The noise produced by the foot-steps of the stranger is collected using the sensor. This sensed signal is then converted into power spectral density and the compared with reference value of our convenien ....etc

[:=Read Full Message Here=:]

Microfabrication technology has been successful in producing a wide range of miniature sensors and mechanical devices. Of particular interest is the application of this technology to biological systems. For instance an immunobiosensor for a bacterial food toxin with a sensitivity of 1 ng/mL and miniature reaction chambers have been fabricated for DNA analysis sequencing by hybridization. The integration of sensors with other components, particularly fluidic devices, offers the promise of microsystems. A miniature positive displacement micropum ....etc

[:=Read Full Message Here=:]

smart coat with biomedical sensors for walking patients collision accident avoidance system using ultrasonic sensors
smart coat with biomedical sensors for walking patients collision accident avoidance system using ultrasonic sensors
smart coat with biomedical sensors for walking patients collision accident avoidance system using ultrasonic sensors ....etc

[:=Read Full Message Here=:]

Definition

Wearable sensors and systems have evolved to the point that they can be considered ready for clinical application. The use of wearable monitoring devices that allow continuous or intermittent monitoring of physiological signals is critical for the advancement of both the diagnosis as well as treatment of diseases. Wearable systems are totally non-obtrusive devices that allow physicians to overcome the limitations of ambulatory technology and provide a response to the need for monitoring individuals over weeks or months.

They t ....etc

[:=Read Full Message Here=:]

Definition

Machine vision involves the analysis of the properties of the luminous flux reflected or radiated by objects. To recover the geometrical structures of these objects, either to recognize or to measure their dimension, two basic vision strategies are available .

Passive vision, attempts to analyze the structure of the scene under ambient light. Stereoscopic vision is a passive optical technique. The basic idea is that two or more digital images are taken from known locations. The images are then processed to find the corre ....etc

[:=Read Full Message Here=:]

Wearable sensors and systems have evolved to the point that they can be considered ready for clinical application. The use of wearable monitoring devices that allow continuous or intermittent monitoring of physiological signals is critical for the advancement of both the diagnosis as well as treatment of diseases. Wearable systems are totally non-obtrusive devices that allow physicians to overcome the limitations of ambulatory technology and provide a response to the need for monitoring individuals over weeks or months. They typically rely on w ....etc

[:=Read Full Message Here=:]

Introduction

Digital 3D imaging can benefit from advances in VLSI technology in order to accelerate its deployment in many fields like visual communication and industrial automation. High-resolution 3D images can be acquired using laser-based vision systems. With this approach, the 3D information becomes relatively insensitive to background illumination and surface texture. Complete images of visible surfaces that are rather featureless to the human eye or a video camera can be generated. Intelligent digitizers will be capable of measuring ....etc

[:=Read Full Message Here=:]