1. INTRODUCTION
Four-wheel steering, 4WS, also called rear-wheel steering or all-wheel steering, provides a means to actively steer the rear wheels during turning maneuvers. It should not be confused with four-wheel drive in which all four wheels of a vehicle are powered. It improves handling and help the vehicle make tighter turns.
Production-built cars tend to understeer or, in few instances, oversteer. If a car could automatically com ....etc

[:=Read Full Message Here=:]

fabrication, design steps, working of four wheel steering system ....etc

[:=Read Full Message Here=:]

FOUR WHEEL STEERING SYSTEM
ABSTRACT
This paper deals with the details of four wheel steering (4WS) system. With the help of this system all the four wheels can be turned to any direction using the steering. Thus the vehicle can be controlled more effectively especially during cornering and parking. Also the speed of the vehicle can be increased or decreased.
There are three types of production of four-wheel ¬steering systems:
1. Mechanical 4WS
2. Hydraulic 4WS
3. Electro/hydraulic 4WS
The mechanical 4WS uses two separate s ....etc

[:=Read Full Message Here=:]

SIR PLEASE GIVE ME REPORT AS I HAVE TO SUBMIT IT IN COLLAGE. THANK YOU ....etc

[:=Read Full Message Here=:]

Abstract :
Four wheel steering is a system that allows the rear wheels to turn for maneuvering, rather than just following the front wheels. It is a relatively new technology that improves maneuverability in cars, trucks and trailers. At higher speeds, the rest wheels steer in the same direction as the front wheels. The result is more stability and less body lean during fast lane changes and turns because the front wheels donâ„¢t have to drag non-steering rear wheels onto the path.
For parking and low-speed maneuvers, the rear ....etc

[:=Read Full Message Here=:]

can u pl send me the details of the project Fabrication of four wheel steering system . as i hav to do a mini project for my 6th sem. pl..... ....etc

[:=Read Full Message Here=:]

Presented by:
 SURAJ KUMAR
 SUMIT KUMAR
 VIKASH KUMAR
 VIVEK SINGH YADAV


FABRICATION OF FOUR WHEEL STEERING SYSTEM
INTRODUCTION
 The front-to-rear wheel alignment plays a significant role in the directional stability of a vehicle.
 Often the lack of stability causes a dangerous drive.
 Up to the mid-1950s the majority of cars suffered from over-steer, mainly due to the uncontrolled movement of the rear axle caused by spring deflection which is initiated by body roll.
 To ....etc

[:=Read Full Message Here=:]

The front wheel steering system of conventional vehicle fails to keep the vehicle stable at high speeds and prove futile for heavy vehicles like tracks and trailers, especially in tight space. But if the rear wheels too could be steered, manoeuvrability of the vehicle will be enhanced. This results in the evolution Four-wheel steering (4WS). In 4WS, rear wheel are also steered in combination with the front wheels. This system helps in achieving superior cornering stability, improved steering responsiveness and precision, high -speed straight-li ....etc

[:=Read Full Message Here=:]

FOUR WHEEL STEERING SYSTEM
ABSTRACT
This paper deals with the details of four wheel steering (4WS) system. With the help of this system all the four wheels can be turned to any direction using the steering. Thus the vehicle can be controlled more effectively especially during cornering and parking. Also the speed of the vehicle can be increased or decreased.
There are three types of production of four-wheel ¬steering systems:
1. Mechanical 4WS
2. Hydraulic 4WS
3. Electro/hydraulic 4W ....etc

[:=Read Full Message Here=:]

four wheel steering system project report ?
....etc

[:=Read Full Message Here=:]