Thanks Thanks Thanks :)
it's helped me too much
Thanks Thanks Thanks Thanks Thanks Thanks Thanks Thanks Thanks Thanks Thanks Thanks Thanks Thanks ....etc

[:=Read Full Message Here=:]

FIRE FIGHTING ROBOT
Objective:
This work explores the implementation of both Bluetooth technologies in mobile robots. The mobile robot has the capability to move around autonomously. If any hurdle faced, pc in turn can redirect the robot. The controls are stored in a PC that acts as a master cum server. The video of the movement of the robot is transferred from the mobile robot are transmitted to the master and processed. Bluetooth technology is used for the same. Then, a command or instruction for further action is ....etc

[:=Read Full Message Here=:]

Fire Fighting Robot Team


Introduction:
Robot is defined as a mechanical design that is capable of performing human tasks or behaving in a human-like manner. Building a robot requires expertise and complex programming. It’s about building systems and putting together motors, solenoids, and wires, among other important components. There are a number of subsystems that must be designed to fit together into an appropriate package suitable for carrying out the robot� ....etc

[:=Read Full Message Here=:]

MICROCONTROLLER BASED FIRE FIGHTING ROBOT
ABSTRACT
IN OUR PROJECT WE DESIGNED A PROTOTYPE TO DETECT FIRE AND EXTINGUISH THE FIRE WITH THE HELP OF WATER SPRINKLER



PROJECT OVER VIEW
BLOCK DIAGRAM

WATER
SPRINKLLER
Project Explanation
BRAIN OF THE PROJECT IS MICROCONTROLLER.

IT INTERFACE WITH SMOKE DETECTOR AND OUTPUT.

DETECTOR GIVES SIGNAL TO PORT3 OF MC.

IT PERFORM 4 ACTIONS.

POWER SUPPLY
Power supply types
Linear power supply.

simple design that be ....etc

[:=Read Full Message Here=:]

In this project is to make a robot which can fight fire at its own as well as can send emergency msg. when nobody is at home. make use of different sensors like ir,temperature etc.Fire fighting robot will contain a blower or a water pump according to our use and the prototype will involve designing a robot which can blow off a condle flame. ....etc

[:=Read Full Message Here=:]

Pokey the Fire-Fighting Robot




1 Introduction
The overall objective of the robot is to be able to navigate a robot through a
standardized maze, detect a candle flame, and extinguish it. To this end, there are four
different subsystems that enable the robot to view its environs and aid it in maneuvering
the maze to accomplish its task. In order to discover where the robot is relative to its
environs, the wall following subsystem has been implemented. To ....etc

[:=Read Full Message Here=:]

Description about sensors based network fire fighting robot full report ....etc

[:=Read Full Message Here=:]

can I see the report of this project because I need help to design fire fighting robot ....etc

[:=Read Full Message Here=:]

Abstract:
The need for a device that can detect and extinguish a fire on its own is long past due. Many house fires originate when someone is either sleeping or not home. With the invention of such a device, people and property can be saved at a much higher rate with relatively minimal damage caused by the fire. Our task as electrical engineers was to design and build a prototype system that could autonomously detect and extinguish a fire. Also aims at minimizing air pollution.In this Project we design a Fuzzy based Microcontroller cont ....etc

[:=Read Full Message Here=:]

Abstract
Firebot is an autonomous robot that wascreated to compete in the IEEESoutheastCon 2003 HardwareCompetition. This paper discusses thedevelopment of each component of therobot that is designed to find a small firerepresented by a light emitting diode ina model home and extinguish it. Thispaper will talk about each component ofthe robot from the start signal to therobot platform to the line following androom finding and finishing with the firedetection.
1. Introduction
Every year IEEE Region 3 holdsthe SoutheastCon Confe ....etc

[:=Read Full Message Here=:]