fffffhdedsssdfgsdgdsgdgdgdgdgdgsdg ....etc

[:=Read Full Message Here=:]

COMPUTERISATION AT STEEL MELTING SHOP



OUR OBJECTIVES


Better access to information regarding current position of various shops and past performance.

Aid in better heat planning due to proper exchange of information.

Better coordination between different sections.

Time and man power saving in preparation of production query/reports.

Transfer of important data to other systems like CCS, S.Mill & EDP computer systems.

Prediction of various data like o ....etc

[:=Read Full Message Here=:]

Selective Catalytic Reduction (SCR), a process where a gaseous or liquid reductant (most commonly ammonia or urea) is added to the flue gas stream and is absorbed onto a catalyst. The reductant reacts with NOx in the flue gas to form H2O and N2.

Specialty Catalytic Converters are required to make an SCR system work, the current options being a Vanadium based catalyst, or a catalyst with Zeolites in the washcoat. In some jurisdictions use of a Vanadium based catalyst are frowned on (California) and the Zeolite type preferred, however Vanadium ....etc

[:=Read Full Message Here=:]

ABSTRACT

Leakage power consumption is large fraction of the total power consumption in contemporary VLSI designs. Since memories occupy a large portion of the total area of many high-performance ICs, it is crucial to reduce the leakage energy of memories. This problem is particularly aggravated for memories implemented in the 45nm technology node, since these processes exhibit significantly higher leakage power. For these memories, leakage is a significant problem not only from a power point of view, but also from performance degradation st ....etc

[:=Read Full Message Here=:]

Selective Catalytic Reduction (SCR), a process where a gaseous or liquid reductant (most commonly ammonia or urea) is added to the flue gas stream and is absorbed onto a catalyst. The reductant reacts with NOx in the flue gas to form H2O and N2.

Specialty Catalytic Converters are required to make an SCR system work, the current options being a Vanadium based catalyst, or a catalyst with Zeolites in the washcoat. In some jurisdictions use of a Vanadium based catalyst are frowned on (California) and the Zeolite type preferred, however Vanadium ....etc

[:=Read Full Message Here=:]

Selective Catalytic Reduction (SCR), a process where a gaseous or liquid reductant (most commonly ammonia or urea) is added to the flue gas stream and is absorbed onto a catalyst. The reductant reacts with NOx in the flue gas to form H2O and N2.

Specialty Catalytic Converters are required to make an SCR system work, the current options being a Vanadium based catalyst, or a catalyst with Zeolites in the washcoat. In some jurisdictions use of a Vanadium based catalyst are frowned on (California) and the Zeolite type preferred, however Vanadium ....etc

[:=Read Full Message Here=:]

JGYFGDTETRRRRRRRRRRRRRRRRRRRRRRRRRDTRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRETTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTT45455555555555555555555NNNNNNNNNNNNNNNNNNNN ....etc

[:=Read Full Message Here=:]

Preamble-based SNR Estimation in Frequency Selective Channels for Wireless OFDM Systems
Synopsis
Introduction
There are two general categories of average SNR estimators. Data-aided (DA) estimators are based on either perfect or estimated knowledge of the transmitted data. However, a certain portion of data is needed for estimation purposes, which reduces bandwidth efficiency. Blind or in-service estimators derive SNR estimate from an unknown information-bearing portion of the received signal preserving efficiency a ....etc

[:=Read Full Message Here=:]

ABSTRACT
Selective laser sintering (SLS) is technique by which parts are building layer by layer. The SLS is a free form fabrication method to create components by precise thermal fusing of powdered materials.
This is durable, economical and fast. The SLS is another form of rapid prototyping. This selective laser sintering (SLS) is one among the rapid prototyping which include stereo lithography (SLA). This method has also been extended to provide direct fabrication of metal and ceramic objects and tools. With this method ....etc

[:=Read Full Message Here=:]

sir i want know about draw back of vacuum breaking system so give me answer very thanking to you ....etc

[:=Read Full Message Here=:]