Management of Available Power in Substation Transformers Based on Reliability
A method for estimating the maximum power obtainable from a distribution transformer is described in this article. This estimate is made on the basis of the estimated value of the future load, current temperature values measured at different points and also the factor of transformer reliability. Also developed is a system to provide means of controlling the transformer overload especially in the times of peak load.

System description
It consists ....etc

[:=Read Full Message Here=:]

RELIABILITY IN MEMS PACKAGING


ABSTRACT
Cost effective packaging and robust reliability are two critical factors for successful commercialization of MEMS and microsystems. While packaging contributes to the effective production cost of MEMS devices, reliability addresses consumer’s confidence in and expectation on sustainable performance of the products. There are a number of factors that contribute to the reliability of MEMS; packaging, in ....etc

[:=Read Full Message Here=:]

Iam you looking for civil engg seminar topics on highway engg
....etc

[:=Read Full Message Here=:]

ABSTRACT

This project is aimed at developing a Bug Tracking for Improving Software Quality and Reliability is useful for applications developed in an organization. The Bug Tracking for Improving Software Quality and Reliability is a web based application that can be accessed throughout the organization. This system can be used for logging Bugs against an application/module, assigning Bugs to individuals and tracking the Bugs to resolution. There are features like email n ....etc

[:=Read Full Message Here=:]

Reliability Modeling of Distributed Generation
in Conventional Distribution Systems Planning and Analysis

A. A. Chowdhury, Senior Member, IEEE, Sudhir Kumar Agarwal, Senior Member, IEEE, and
Don O. Koval, Fellow, IEEE



Abstract—

The primary objective of any electric utility company
in the new competitive environment would be to increase the
market value of the services it provides with the right amount
of reliability, and at the same time, lower its costs for ope ....etc

[:=Read Full Message Here=:]

Network Reconfiguration Using a Genetic Approach
for Loss and Reliability Optimization in Distribution Systems

Romeu M. V. Vitorino (1), Humberto M. M. Jorge (2) and Luís M. P. Neves (1)
(1) Polytechnic Institute of Leiria – School of Technology and Management, Portugal
Department of Electrical Engineering
(2) Faculty of Sciences and Technology of the University of Coimbra, Portugal
Department of Electrical Engineering and Computers
(1), (2) Institute for Systems and Computers Engineering of Coimbr ....etc

[:=Read Full Message Here=:]

Abstract –
There is a trend toward increasing the performanceof power electronics converters used in photovoltaic systems.However, parameters such as reliability, efficiency, andcomplexity might be in conflict. In this paper, the design of asimple DC/DC interleaved boost converter is assessed. It takesadvantage of state-of-the-art power devices that have fastswitching times. It is shown that requirements of low complexity,high reliability, and high efficiency can be satisfied, withoutresorting to switching aids, provided that the dev ....etc

[:=Read Full Message Here=:]

The performance of caching systems in general, and Internet caches in particular, is evaluated by means of the user-perceived service speed, reliability of downloaded content, and system scalability. In this dissertation, we focus on optimizing the speed of service, as well as on evaluating the reliability and quality of data sent to users. In order to optimize the service speed, we seek optimal replacement policies in the first part of the dissertation, as it is well known that download delays are a direct product of document availability at ....etc

[:=Read Full Message Here=:]

The switched varactor for high power RF signals is described in this article. This varactor can perform tuneable capacitor operations up to 10 GHz frequencies. The RF micro-electro-mechanical systems (MEMS) has become an atractive area of research in the recent. Devices like tuners, antenna beam forming networks and reconfigurable filters all will benefit from this.

Design principles
In the case of RF MEMS which depend on the electrostatic actuation have a a small air gap in the micrometer range between their movable membrane and ....etc

[:=Read Full Message Here=:]

Toward Broadcast Reliability in Mobile Ad Hoc Networks with Double Coverage. (A New TCP for Persistent Packet Reordering).

Abstract:

The broadcast operation, as a fundamental service in mobile ad hoc networks (MANETs), is prone to the broadcast storm problem if forwarding nodes are not carefully designated. The objective of reducing broadcast redundancy while still providing high delivery ratio under high transmission error rate is a major challenge in MANETs. In this paper, we propose a simple broadcast algorith ....etc

[:=Read Full Message Here=:]