Radius is an acronym that stands for Remote Authentication Dial In User Service is a protocol used for applications such as IP mobility and network access “both for local access and roaming access. It is a protocol for Authorization, Authentication and Accounting. RADIUS was originally developed by Livingston Enterprises. But now there exist many commercial and open source RADIUS servers. RADIUS server is responsible for the verification of the login information (Username & Password) that is passed over the RADIUS protocol. It uses any of ....etc

[:=Read Full Message Here=:]

DESIGN OF PRESSURE VESSEL

ABSTRACT
This project work deals with a detailed study and design procedure of pressure vessel. A detailed study of various parts of pressure vessels like shell, closure, support, flanges, nozzles etc. Design is carried according to rules of ASME code section VIII, Division I.
The first chapter deals with detailed study of pressure vessel i.e. the various materials used in pressure construction and temperature are mentioned .It also deals with the study of various parts like flanges, support e ....etc

[:=Read Full Message Here=:]

PLZ SEND MATERIAL FOR THIS TOPIC ....etc

[:=Read Full Message Here=:]

Radius is an acronym that stands for Remote Authentication Dial In User Service is a protocol used for applications such as IP mobility and network access “both for local access and roaming access. It is a protocol for Authorization, Authentication and Accounting. RADIUS was originally developed by Livingston Enterprises. But now there exist many commercial and open source RADIUS servers. RADIUS server is responsible for the verification of the login information (Username & Password) that is passed over the RADIUS protocol. It uses any of ....etc

[:=Read Full Message Here=:]

ABSTRACT
Recent availability of small inexpensive low power GPS receivers and techniques for finding relative coordinates based on signal strengths, and the need for the design of power efficient and scalable networks, provided justification for applying position based routing methods in ad hoc networks. A number of such algorithms were developed in last few years, in addition to few basic methods proposed about fifteen years ago.
This article surveys known routing methods, and provides their taxonomy in terms of a numb ....etc

[:=Read Full Message Here=:]

SEMINAR REPORT ON WIRELESS LAN SECURITY
Abstract:
a. The 802.11 Wireless LAN Standard
In 1997, the IEEE ratified the 802.11 Wireless LAN standards,
establishing a global standard for implementing and deploying Wireless
LANS. The throughput for 802.11 is 2Mbps, which was well below the IEEE
802.3 Ethernet counterpart. Late in 1999, the IEEE ratified the 802.11b
standard extension, which raised the throughput to 11 Mbps, making this
extension more comparable to the wired equivalent. The 802.11b also
suppo ....etc

[:=Read Full Message Here=:]

SEMINAR REPORT
ON
WIRELESS LAN SECURITY
I. Introduction
a. The 802.11 Wireless LAN Standard
In 1997, the IEEE ratified the 802.11 Wireless LAN standards,
establishing a global standard for implementing and deploying Wireless
LANS. The throughput for 802.11 is 2Mbps, which was well below the IEEE
802.3 Ethernet counterpart. Late in 1999, the IEEE ratified the 802.11b
standard extension, which raised the throughput to 11 Mbps, making this
extension more comparable to the wired equivalent. The 802.11b also ....etc

[:=Read Full Message Here=:]

COST EFFECTIVENESS OF MINERAL WOOL INSULATION Vs PERLITE INSULATION
PROJECT REPORT
Submitted by
DIPU.K.SHAJI GITHU BABU VARUN KUMAR. T.K VIMAL MENON
ABSTRACT
The main objective of this project is to make the cost effectiveness analysis of the system of the thermal insulation of the pipe lines in petrochemical plant which carries steam. In a chemical plant maintaining temperature of fluids in different pipe lines assume greatest importance as each process is performed at particular temperature.
The project work was car ....etc

[:=Read Full Message Here=:]

A patented new power machine concept has been designed and analyzed for production, and proof of principle subscale tests have been performed, with positive results. The machine design concept is applicable as a compressor, pump, motor, or engine. Simplicity of design based on spherical ball pistons enables a low moving part count, high power to weight ratio, elimination of valve train and water cooling systems, and perfect dynamic balance.The new design concept utilizes novel kinematic design to completely eliminate inertial loads that would c ....etc

[:=Read Full Message Here=:]

SHEET METAL DRAWING
The sheet metal deep drawn technology is one of the most challenging process in manufacturing. The sizes, shapes, thickness and deep drawn metal used to produces sheet metal deep drawn parts cover a diverse range of variables. Individual variables should be evaluated carefully to determine the optimum manufacturing method.
Regardless of the many factors involved affecting the draw quality, the most important element to a successful sheet metal deep drawing operation is the smoothness of sheet met ....etc

[:=Read Full Message Here=:]

SLIVER GENERATION REDUCTION IN TRIMMING OF ALUMINUM
Seminar
Presented by
VIVEK ASHWIN
DEPARTMENT OF MECHANICAL ENGINEERING
N S S COLLEGE OF ENGINEERING
PALAKKAD-678008, KERALA.

SYNOPSIS

Aluminum auto body sheets produce appreciable amounts of slivers during trimming operations when trimmed with dies conventionally designed for steel sheets. The slivers can be carried through downstream processes and cause damage to the surface of formed parts resulting in costly manual repair. T ....etc

[:=Read Full Message Here=:]

Zero turning four steering mechanism ppt ....etc

[:=Read Full Message Here=:]

Implementation of RADIUS Support in PickPacket


The extensive use of computers and networks for exchange of information has also had ramifications on the growth and spread of crime through their use. Law enforcement agencies need to keep up with the emerging trends in these areas for crime detection and prevention. Among the several needs of such agencies are the need to monitor, detect and analyze undesirable network traffic. However, the monitoring, detecting, and analysis of this traffic may be against the goal of maintaining priv ....etc

[:=Read Full Message Here=:]