The Technique of measuring high temperature is known as pyrometry and the instrument employed is called pyrometer. Pyrometer is specialized type of thermometer used to measure high temperatures in the production and heat treatment of metal and alloys. Ordinary temperatures can be measured by ordinary thermometer, instead pyrometer is employed for measuring higher temperature.
Any metallic surface when heated emits radiation of different wavelengths which are not visible at low temperatures but at about 5400C radiations are in shorter wavelengt ....etc

[:=Read Full Message Here=:]

ABSTRACT
In today's fast moving World, the accidents are increasing at a very fast rate. One of the major causes of these accidents is over a speeding of vehicles. A major step has been taken rather to increase the road safety, so as to minimize the accidents

One of a major development was the introduction of speed cameras. This camera, usually containing radar, is electronic devices those working are still a mystery to most electronic hobbyists. The principle of these speed cameras is Doppler Eff ....etc

[:=Read Full Message Here=:]

Electro Discharge Machining

Introduction
The unconventional method of several specific advantages over conventional methods of machining and these promise formidable tasks to be undertaken and set a new recording in the manufacturing technology. EDM is one such machining process, which has been immense help to the manufacturing process engineers to produce intricate shapes on any conducting metal and alloy irrespective of its hardness and toughness.

CLASSIFICATION
1. Contact initiated dischar ....etc

[:=Read Full Message Here=:]

i am student of instrumentation and i want to read about industrial instrumentation.............. ....etc

[:=Read Full Message Here=:]

1. In the fire tube boilers :
(A)The hot gases pass through tubes and water surrounds the tubes
(B)The water passes through the tubes and hot gases surround the tubes
(C )Fire surrounds the tubes and water passes in the tubes
(D)All of the above

2. Lancashire boiler is :
(A)Internally fired boiler
(B)Externally fired boiler
(C )Forced circulation boiler
(D)Water tube boilerWater tube boiler

3.Which of the following is a fire tube boiler?
(A)Stirling boiler
(B)Babcox and Wilcox boiler
(C )Velox boiler
(D)Loco ....etc

[:=Read Full Message Here=:]

friend please help me in getting ppt on radiation pyrometers
....etc

[:=Read Full Message Here=:]

sir, i am the student of B.Tech. EI 3rd year. I am looking for seminar on the Radiation Pyrometer so i have a requirement of report (about 50to 60 pages) and ppt presentation.
so sir please send me material related to this topic. ....etc

[:=Read Full Message Here=:]

The Technique of measuring high temperature is known as pyrometry and the instrument employed is called pyrometer. Pyrometer is specialized type of thermometer used to measure high temperatures in the production and heat treatment of metal and alloys. Ordinary temperatures can be measured by ordinary thermometer, instead pyrometer is employed for measuring higher temperature.
Any metallic surface when heated emits radiation of different wavelengths which are not visible at low temperatures but at about 5400C radiations are in shorter wavelengt ....etc

[:=Read Full Message Here=:]

Electro Discharge Machining

Introduction
The unconventional method of several specific advantages over conventional methods of machining and these promise formidable tasks to be undertaken and set a new recording in the manufacturing technology. EDM is one such machining process, which has been immense help to the manufacturing process engineers to produce intricate shapes on any conducting metal and alloy irrespective of its hardness and toughness.

CLASSIFICATION
1. Contact initiated dischar ....etc

[:=Read Full Message Here=:]

87/2015
Maximum : 100 marks
Time : 1 hour and 15 minutes

1.Which among the following is a passive device?
(A)Transistor (C ) Triac
(B) Vacuum Tube (D) Capacitor

2.Tachometer is used to measure :
(A)Vibration
(B) Acceleration
(C ) Force
(D) Angular Velocity

3.The ratio of output change to the input change of the instrument is called (A) Precision
(B) Accuracy
(C ) Sensitivity
(D) Reproducibility

4.Digital system usually operates on :
(A) Binary system
(B) Octal system
(C ) Decimal system
(D) Hexade ....etc

[:=Read Full Message Here=:]

The Technique of measuring high temperature is known as pyrometry and the instrument employed is called pyrometer. Pyrometer is specialized type of thermometer used to measure high temperatures in the production and heat treatment of metal and alloys. Ordinary temperatures can be measured by ordinary thermometer, instead pyrometer is employed for measuring higher temperature.
Any metallic surface when heated emits radiation of different wavelengths which are not visible at low temperatures but at about 5400C radiations are in shorter wavelengt ....etc

[:=Read Full Message Here=:]

Please send me information about pyrometer ....etc

[:=Read Full Message Here=:]

to get project report and source code of specific mini projects in electronics project please see http://studentbank.in/topic-electronics-electrical-instrumentation-applied-electronics-project-ideas


a) Sinewave Generator
b) Simple Code Lock
c) Stepper Motor Control Using Microcontroller
d) Telephone Receiver
e) Telephone Number Display
f) Temperature Controlled Soldering Station
g) Teach-In 2002 Lab Work “ 5 “ Strain Gauge Weighing Machine
h) Telephone Call Counter
i) Touch Dimmer
j) ....etc

[:=Read Full Message Here=:]