Biogas containing approximately 60% methane can be produced from paddy straw -a lingocellulosic waste, by anaerobic fermentation using cattle dung as source of inoculum .The total gas production from the paddy straw is more in comparison to that of cattle dung as substrate. But pretreatment of paddy straw with NaOH can reduce the Holding Retention Time significantly. Moreover paddy straw is able to supply higher yield of biogas due to its slow decomposition .The digested slurry was found to be a very good source of manure. Biogas containing 60% ....etc

[:=Read Full Message Here=:]

190/2014
Maximum : 100 marks
Time : 1 hour and 15 minutes

1.Cast iron during machining produces :
(A)Continuous chips
(B) Continuous chips with built-up-edge
(C ) Discontinuous chips
(D) None of these

2.A single point thread cutting tool should ideally have :
(A)Negative rake angle
(B) Positive rake angle
(C ) Zero rake angle
(D) Point angle

3.The cutting tool in a milling machine is mounted on :
(A) Spindle
(B) Knee
(C ) Column
(D) Arbor

4.The lip angle of a single point tool is usually :
(A) 20� ....etc

[:=Read Full Message Here=:]

There are several growing needs for hydrogen: in the near-term for the upgrading of heavy petroleum, as a chemical feedstock, and for the production of fertilizer; in the mid-term for the production of synthetic fuels for transportation; and in the long-term as a transportation fuel through the use of fuel cells.



High-temperature electrolytic water-splitting supported by nuclear process heat and electricity has the potential to produce hydrogen with an overall system efficiency of 45 to 50 %, while avoiding the challenging corrosive con ....etc

[:=Read Full Message Here=:]

Production Forecasting is intranet-based application that concentrates on the arteries of commercial transactions, which is properly established between the Sales team and the Production Team in conducting the general sales transactions. The application acts as a bridge between the Sales team and the production team to run the general business transactions of the sales in integration of the production and marketing team with the use of the Electronic media. This application helps the commercial people to gain through the accessibility of this b ....etc

[:=Read Full Message Here=:]

please help me for concurrent production using rapid prototyping technology

this is my M.Tech. seminar topic ....etc

[:=Read Full Message Here=:]

Biogas containing approximately 60% methane can be produced from paddy straw -a lingocellulosic waste, by anaerobic fermentation using cattle dung as source of inoculum .The total gas production from the paddy straw is more in comparison to that of cattle dung as substrate. But pretreatment of paddy straw with NaOH can reduce the Holding Retention Time significantly. Moreover paddy straw is able to supply higher yield of biogas due to its slow decomposition .The digested slurry was found to be a very good source of manure. Biogas containing 60% ....etc

[:=Read Full Message Here=:]

Abstract:

PRODUCTION PLANNING AND CONTROL

This project (Production Planning and Control) aim is to simplify your day-to-day work. There are a range of functions and reports that provide extensive information on all materials with their stock data.

The main process involves Goods Receipts, Goods Issue, details about stocks and the warehouse contents are stored into the database. They are updated accordingly in the system.

The project consists of various modules such as raw materials, vendor details, purchase order, repair section, ....etc

[:=Read Full Message Here=:]

....etc

[:=Read Full Message Here=:]

Abstract

In this study, we propose some simple but effective throughput-approximation methods for finite-buffered closed-loop production systems with unreliable machines and exponentially distributed processing times. The proposed approximation methods are based on decomposition and aggregation principles. According to the method representing the decomposed systems, three different approximation methods are developed, along with a simple upper bounding method for throughputs. Extensive computational experiments are perform ....etc

[:=Read Full Message Here=:]

Iam Karthik i am doing my BE in production i am into 7th semester Can anyone guide me as to what kind of projects are suitable to my engineering i want complete information as to how i go about projects

Pl z reply ....etc

[:=Read Full Message Here=:]