Abstract -
The proliferation of power electronic
based equipment has produced a significant impact
on the quality of electrical power supply. The
modern day equipments are highly sensitive to
deviation from ideal sinusoidal voltages.
Conventional power quality enhancement
equipments are providing to be in adequate. A very
promising solution for supply voltage imperfection
is UPQC (Unified Power Quality Conditioner).
Unified power quality conditioners (UPQCs) allow
the mitigation of voltage and current disturbances
that coul ....etc

[:=Read Full Message Here=:]

IMPROVING VOLTAGE SAG RIDE-THROUGH IN
HYBRID FUEL CELL / BATTERY DISTRIBUTED
GENERATION SYSTEMS
ABSTRACT
In this paper controller design for voltage sag ride-through in hybrid fuel
cell/energy storage distributed power generation system has been presented. As the
amount of fuel cell power generation and other Distributed Generation (DG) with
power electronic in the grid grows, it becomes unacceptable to disconnect generat-
ing units every time a disturbance occurs, as was common practice in he past.
Keep ....etc

[:=Read Full Message Here=:]

voltage, usually caused by a fault in A voltage sag is a momentary decrease in the rms the utility transmission line or distribution system within customer facility.

It is a temporary voltage drop below 90% of the nominal voltage level. Voltage sags and momentary power interruptions are probably the most important power quality problems affecting industrial and large commercial customers.

This paper describes the causes of voltage sags, their impacts on equipment operations and possible solutions. This paper focuses on system faults ....etc

[:=Read Full Message Here=:]

sir/madam can u please help me in simulink model of voltage sag ....etc

[:=Read Full Message Here=:]

....etc

[:=Read Full Message Here=:]

A voltage sag is a momentary decrease in the rms voltage, usually caused by a fault in the utility transmission line or distribution system within customer facility. It is a temporary voltage drop below 90% of the nominal voltage level. Voltage sags and momentary power interruptions are probably the most important power quality problems affecting industrial and large commercial customers. This paper describes the causes of voltage sags, their impacts on equipment operations and possible solutions. This paper focuses on system faults as the majo ....etc

[:=Read Full Message Here=:]

I AM ANIL KUMAR PURSUING M.TECH, EEE, PSCA. THIS TIME I NEED TO DO PROJECT WORK ON UPQC AS SAID ABOVE TOPIC. I NEED HELP FROM UR SIDE FOR COMPLETE THE M.TECH, SO I WANT TO KNOW THE ABOVE TOPIC IN FULL VERSION. PLEASE FORWARD THE ABOVE WORK TO MY MAIL........
[email protected]

thanking you.....! ....etc

[:=Read Full Message Here=:]

EFFECTS OF VOLTAGE SAGS, SWELL AND OTHER DISTURBANCES ON
ELECTRICAL EQUIPMENT AND THEIR ECONOMIC IMPLICATIONS



ABSTRACT

Poor power quality has come to stay in most parts of the
world. In most part of Africa, especially in Nigeria, it is
almost normal not to have good clean power free from
disturbances. If power equipment and loads could talk or
express feelings, I am sure they would have made a big
protest against the great injustices imposed on them. A
survey was carried out amongst 15 multi-nation ....etc

[:=Read Full Message Here=:]

A voltage sag is a momentary decrease in the rms voltage, usually caused by a fault in the utility transmission line or distribution system within customer facility. It is a temporary voltage drop below 90% of the nominal voltage level. Voltage sags and momentary power interruptions are probably the most important power quality problems affecting industrial and large commercial customers. This paper describes the causes of voltage sags, their impacts on equipment operations and possible solutions. This paper focuses on system faults as the majo ....etc

[:=Read Full Message Here=:]

This article describes the Voltage swell and overvoltage compensation problems in a diode-bridge rectifier supported transformerless-coupled
dynamic voltage restorer (DVR). applying conventional in-phase or phase-invariant boosting method in case of condition of swell or overvoltage, may cause a a rapid rise in dc-link voltage which may ultimately lead to the damage of the storage capacitors and switching devices, and increase the switching loss. The minimum energy injection scheme is unable to solve these problems. Here, a novel unidirectio ....etc

[:=Read Full Message Here=:]