This topic is devoted to the analysis of the mechanical behavior of filament-wound pipes. The process of filament winding makes it possible to produce rotating parts made of composite material containing polymers reinforced with long fibers. Most of the time, this process consists in winding a fiber tow coated with a thermosetting polymeric matrix around a mandrel, and thus covering the entire mandrel after successive passages. Following a polymerization phase, the mandrel can be removed in order to get only the composite structure. In certain ....etc

[:=Read Full Message Here=:]

Nice content btw ... this article maybe useful for me ... Nice content btw ... this article maybe useful for me ... Nice content btw ... this article maybe useful for me ... Nice content btw ... this article maybe useful for me ... Nice content btw ... this article maybe useful for me ... Nice content btw ... this article maybe useful for me ... ....etc

[:=Read Full Message Here=:]

Jet impingement heat transfer – Part I: Mean and root-mean-square heat transfer and velocity distributions
Abstract
Impinging jets provide a means of achieving high heat transfer coefficients both locally and on an area averaged basis. The currentwork forms the first stage of a two part investigation of heat transfer distributions from a heated flat surface subject to an impinging airjet for Reynolds numbers from 10,000 to 30,000 and non-dimensional surface to jet exit spacing, H/D, from 0.5 to 8. In the present paper,the rel ....etc

[:=Read Full Message Here=:]

Fundamentals of Heat Pipes


With Applications to Electronics Cooling
-- Widah Saied


Things to be discussed:
Basic components
Advantages
Ideal thermodynamic cycle
Applications
Types
Heat transfer limitations
Resistance network
Wick design
Choosing the working fluid
Container design
Heat pipes in electronics cooling
Current research in electronics cooling

....etc

[:=Read Full Message Here=:]

1. INTRODUCTION
A heat pipe is a simple device that can quickly transfer heat from one point to another. They are often referred to as the superconductors of heat as they possess an extra ordinary heat transfer capacity & rate with almost no heat loss.
The development of the heat pipe originally started with Angier March Perkins who worked initially with the concept of the working fluid only in one phase (he took out a patent in 1839 on the hermetic tube boiler which works on this principle). Jacob Perkins (descendant ....etc

[:=Read Full Message Here=:]

hi plz send me this topic pdf and ppt ....etc

[:=Read Full Message Here=:]

send me the seminar report of heat pipes on my email id ....etc

[:=Read Full Message Here=:]

DjtmtjapjmTjdgumjpxjgugumjpupvdmtpgmtpglngjmtpgajptnjgtwjpuwdjgpm ....etc

[:=Read Full Message Here=:]

Presented by:
A.JohnBritto
C.Kanaga Raj
P.Senna Kesavan
A.VinothHEAT TRANSFER PERFORMANCE IN 3D INDUCED FINNED HEAT PIPE

ABSTRACT
3D induced finned steel-water heat pipe is carried out in this project.

All the main parameters that can significantly influence the heat transfer performance of heat pipe ,such as working temperature, heat flux, inclination angle, working fluid fill ratio (defined by the evaporatio ....etc

[:=Read Full Message Here=:]

High Conductance Heat Transfer Using Solar Heat Pipe Collector

presented by :-
MR. SHIVAJI D. YADAO1, MR. PRMENDRA J BANSOD2
Dr. D.Y.Patil Institute of Engg. & Tech.,Pune University, Pune,
Dr. D.Y.Patil Institute of Engg. & Tech.,Pune University, Pune,

abstract
In recent years it has become increasingly important to develop methods for efficient transport of thermal energy from one location to another. Moreover the advent of the space age has stimulated research for heat transfer devices which are ....etc

[:=Read Full Message Here=:]