Role & Role Effectiveness
Role, Role Space & Role Set
• Mutual obligations under a social system
• Functions one performs in response to the expectations
• Role is defined with the expectations of the role senders, including those of the role occupant.
• Role Space is a dynamic relationship between the self and the various roles an individual occupies and also amongst these roles
• Role Set is a subsystem or inter relationships between a particular role and the other roles in an organi ....etc

[:=Read Full Message Here=:]

Submitted by: - ANKUSH BILLAWARIA

ABSTRACT
This project has been a great learning experience for me; at the same time it gave me enough scope to implement my analytical ability. This project as a whole can be divided into two parts:
The first part gives an insight about the footwear and its various aspects. It is purely based on whatever I learned at Sarup Tanneries. One can have a brief knowledge about footwear and all its basics through the project. Other than t ....etc

[:=Read Full Message Here=:]

BlackBerry maker RIM Co-CEO Jim Balsillie in the company after the release of the third quarter took a JPMorgan analyst Hall Rod interview. He said in an interview, RIM in some areas far ahead in Apple, especially upcoming entry next tablet.

Hall interview questions are basically revolves around how RIM compete with Apple and Google. Leslie Barr said: Entries are latecomers, Apple and Google coach purses will (tied house) in the digital home integration direction.

He noted that introduction has been identified in the Tablet PC. The pro ....etc

[:=Read Full Message Here=:]

I want to made this project for my final year project .
i nedd the information and design( if you have)
kindly help me

regards
sunil ....etc

[:=Read Full Message Here=:]

NASA-DoD Lead-Free Electronics Project
Automated X-Ray of Circuit Card Assemblies
Machine:
YESTech YTX-5000 model in-line x-ray machine
X-Ray Tube: Sealed reflection target
130 Kv, 5 micron spot size
39-watt max. output
X-Ray FOV 0.2” to 1.5” variable
Program settings:
All x-ray inspections are performed at 75kV and 40
A.
Inspection set-up:
QFN
1. Inspect each lead bank for joint presence and bridging
Threshold = 172
2. Inspect center pad for voids (flag if > 25%)
Threshold = 151
CSP-100
1. Insp ....etc

[:=Read Full Message Here=:]

Lead and chromium as limiting factors in recycling textile industrial sludge as an amendment in crop production
Abstract
Textile and dyeing industry is one of the leading industries in Tamilnadu state of India. The coagulant process followed for treating the wastewater generated from this industry leads to sludge accumulation with a production of daily average of 10 tonnes in each Common Effluent Treatment Plant (CETP). As the sludge contained 17.2 per cent of Ca, its ameliorative potential as an amendment al ....etc

[:=Read Full Message Here=:]

The Lead Acid Battery
Lead-acid batteries, invented in 1859 by French physicist Gaston Planté, are the oldest type of rechargeable battery. Despite having a very low energy-to-weight ratio and a low energy-to-volume ratio, their ability to supply high surge currents means that the cells maintain a relatively large power-to-weight ratio. These features, along with their low cost, make them attractive for use in motor vehicles to provide the high current required by automobile starter motors.
....etc

[:=Read Full Message Here=:]

Nowadays maintenance-free lead-acidbatteries are common in vehicles,inverters, and UPS systems. If thebattery is left in a poor state of charge, itsuseful life is shortened. It also reduces thecapacity and rechargeability of the battery.For older types of batteries, a hygrometercan be used to check the specific gravityof the acid, which, in turn, indicates thecharge condition of the battery. However,you cannot use a hygrometer for sealedtypemaintenance-free batteries. The onlyway to know their charge level is by checkingt ....etc

[:=Read Full Message Here=:]

There are 3 leads in a transistor viz. collector,emitter and base. When a transistor is to be connected in a circuit,it is necessary to know which terminal is which.
There are three systems in general from which we can determine which terminal is which,they are as follows
http://farm4.static.flickr3391/3659964364_72d718d281.jpg
1. When the leads of the transistor are in same plane and unevenly spaced then they are identified by the position and spacing of leads. The central lead is the base lead.the collector lead is identified b ....etc

[:=Read Full Message Here=:]

plz send the project my id

regards
selvaraj ....etc

[:=Read Full Message Here=:]