1.Consumption of raw soybeans can be harmful to health because of the presence of following anti-nutritional factor:
(A)Phytic acid(B)Tannins
(C )Oxalates(D)Trypsin inhibitor

2.In a standard fruit jam preparation the content of total soluble solids should not be less than :
(A)68% W/W(B)45% WAV
(C )65% W/W(D)70% W/W

3.The safe level of irradiation for foods, which presents no toxicological hazard is :
(A)5.0 kGy(B)10.0 kGv
(C )7.0 kGy(D)25.0 kGy

4.Subjecting rice to higher degree of polishing is associated with ....etc

[:=Read Full Message Here=:]

This seminar report titled Noise Pollution and Control in Chemical Industries deals with the various sources of noise in an industry. It also highlights the hazards that noise causes on man and environment. The report also commets on some measures which can be implemented in noise causing industries to control the noise to an acceptable level. Noise and industry always goes together and every industry is a source of noise. The increased speed to achieve greater productivity, higher velocity of the process stream, vibration etc. are the main cau ....etc

[:=Read Full Message Here=:]

about safety in the chemical process industry ppt in to the right box for getting free material and support me ....etc

[:=Read Full Message Here=:]

NEW CHEMICAL INSTRUMENTS USING MISSILE TECHNOLOGY

Catalyst have been used by human mankind for over 2000 years, it wasnt until 1835 that Berzelius suggested that small amounts of a foreign source could greatly affect the course of chemical reaction, this mysterious force attributed to the substance was called catalyst. In 1894, Oswald expanded Berzelius explanation by stating that catalysts were substances that accelerate the rate of chemical reactions without being consumed. In over 150 years since Berzelius work, catalysts have come to pla ....etc

[:=Read Full Message Here=:]

I required the information in Hindi , i want this information communicate with the people those who doesn't understand the English language , if you can provide the information this will really help me ....etc

[:=Read Full Message Here=:]

The primary objective of a design engineer is to ensure a safe, efficient design of equipment to carry out a process. This needs a good understanding of the various processes occurring in the system. The operation of the equipment under varying operating conditions must be analyzed since any process is prone to disturbances. This needs a model which captures all interactions. Such a model can be used for nonlinear analysis and to subsequently develop control strategies and optimize plant operation. The steady state and dynamic behavior is predi ....etc

[:=Read Full Message Here=:]

if you want to know more about this topic headers,just reply below,i will try to gather more informatio;.
Sustainability of Ethanol and Other Biofuels
Sustainable H2 Production from Next Generation Nuclear Plants
Fluorescent Tracing in Process Control
Hospital Waste Management
Microfluidics
Membrane Bioreactor-An Excellent Option for Wastewater Treatment
Modern Air Pollution Control Technologies
New Polymerization Technology for Advanced Materials
Processing of semiconductor materials
Tidal Energy Harvesti ....etc

[:=Read Full Message Here=:]

Manufacturing of the intricate machines has taken a new dimension with the introduction of the innovative process of chemical, electrical and mechanical methods. Electrochemical machining (ECM) is a groundbreaking technology, for the development of complicated machines. ....etc

[:=Read Full Message Here=:]

A chemical computer, also called reaction-diffusion computer, BZ compter or gooware computer is an unconventional computer based on a semi-solid chemical soup where data is represented by varying concentrations of chemicals. The computations are performed by naturally occurring chemical reactions. So far it is still in a very early experimental stage, but may have great potential for the computer industry. ....etc

[:=Read Full Message Here=:]

Nanotechnology, as a whole is still an emerging area with the need to make progress in both scientific and technological terms before enormous commercialization of products may occur. Nanotechnology is the science of manipulating and characterizing matter at the atomic and molecular level (at the sub 100 nm level). It is one of the most exciting fields of science, involving a multitude of science and engineering disciplines, with widespread applications in electronics, chemical industry advanced materials, medicine, IT. Greek prefix nano (dwarf ....etc

[:=Read Full Message Here=:]