1. INTRODUCTION
Programmable logic controllers (PLCs) are members of the computer family capable of storing instructions to control functions such as sequencing, timing, and counting, which control a machine or a process. The PLC is composed of two basic sections, the Central Processing Unit (CPU) and the Input/Output (I/O) interface system. The PLC measures input signals coming from a machine and through the internal program provides output or control back to the machine.
Ladder logic is the programming language used t ....etc

[:=Read Full Message Here=:]

Weather is a major factor in platform operation. When high sea and hurricanes approach a platform the crew must evacuate to prevent injury or loss of life. Thus safety is an important factor as far as an oilrig is concerned. Oil and gas production must continue on an uninterrupted manner to ensure profitability. To further this end, labor-intensive, repetitive task such as opening and closing valves, monitoring levels, and shut down of platform to prevent equipment damage are handed over to programmable logic controllers (PLC's).
To know about ....etc

[:=Read Full Message Here=:]

PROJECT REPORT ON
FULLYAUTOMATED BURNER MANAGEMENT SYSTEM USING PLC

FACT (THE FERTILIZERS AND CHEMICALS TRAVANCORE LIMITED) was set up in 1944 on the banks of river Periyar at Udyogamandal, Ernakulam. In decades that followed, multistage expansion programming was undertaken bringing in the latest technology of the days, which were quickly mastered and I successfully implemented.
In 1962, FACT came under the government of India. A second fertilizers production unit called Cochin Division (CD) at Ambalamughal and two ....etc

[:=Read Full Message Here=:]

Power line communication (PLC), also called Mains Communication, Power Line Telecoms (PLT), Powerband or Power Line Networking (PLN), is a term describing several different systems for using power distribution wires for simultaneous distribution of data. The carrier can communicate voice and data by superimposing an analog signal over the standard 50 or 60 Hz alternating current (AC). It includes Broadband over Power Lines (BPL) with data rates sometimes above 1 Mbit/s and Narrowband over Power Lines with much lower data rates. Traditionally el ....etc

[:=Read Full Message Here=:]

To get report with source code for specific plc based project topic please browse through this page http://studentbank.in/topic-electronics-electrical-instrumentation-applied-electronics-project-ideas






A. PC based cordless pick and place Robot
B. PC based room cooling system
C. PC based Stepper motor speed control system
D. PC based Electrical appliances control System
E. PC to PC data transmission through Infrared Rays
F. PC Based 4-Axis stepper motor tracking System
G. PC based Auto feed ....etc

[:=Read Full Message Here=:]

hello sir
i want to make a PLC BASED BOTTLE FILLING STATION MODEL KIT for my major project, so please help me by sending its project report, catalog, or any information regarding this topic.
hoping for an early reply
parveen
[email protected] ....etc

[:=Read Full Message Here=:]

Electronic Assisted hydraulic breaking system
Fabrication of Pneumatic Auto feed Bottle washing Machine
Fabrication of Abrasive Jet Machine
Combined hydraulic and disk break system
Automatic paint spraying Equipment
Automatic pneumatic vice and jack
Fabrication of Pneumatic automatic Vegetable Cutting Machine
Fabrication of Pneumatic punch die
Automatic pneumatic welding machine
Fabrication of three axis pneumatic Modern Trailer
Fabrication of hydro coupling mechanism
Automatic pneumatic Spring End Grinding Machine
Fabrication of au ....etc

[:=Read Full Message Here=:]

i want some idea about the pick and place sequence operated by plc and pneumatics and wht are the requirement equipments for that. ....etc

[:=Read Full Message Here=:]

OPTIMIZATION AND AUTOMATION OF WATER COOLING FACILITY USING PLC
PROJECT REPORT
Submitted by AKHILA. K BEETHA BABY SHAMNA.M.U SREEKALA.V
SYNOPSIS
The project Optimization and automation of operation of cooling Water Facility in FACT Udyogamandal aims at three objectives. Energy conservation measures by selective switching & speed control, automation of the Plant and energy saving by way of PF improvement. The Cooling water facility in a Process industry offers great scope for energy efficient operation by way of selective ....etc

[:=Read Full Message Here=:]

abstract on automation ....etc

[:=Read Full Message Here=:]