Abstract.
Using piezoelectric elements to harvest energy from ambient vibrations has been of great interest over the past few years. Due to the relatively low power output of piezoelectric materials, energy storage devices are used to accumulate harvested energy for intermittent use. Piezoelectric energy harvesting circuits have two schemes: one-stage and two-stage energy harvesting. A one-stage energy harvesting scheme includes a conventional diode bridge rectifier and an energy storage device. In recent years, two-stage energy harvesting ci ....etc

[:=Read Full Message Here=:]

Abstract

The DELTA Smart House is going to have a large number of sensors and microelectronic devices located throughout the house. These devices will need a clean, reliable source of energy that wonâ„¢t need constant maintenance. The goal of this seminar is to discuss utilization of piezoelectric energy sources to provide power to certain applications in the house. Initially an energy scavenging floor that used piezoelectric transducers to harvest wasted energy in the foot strike of a human being. In consideration of the high cos ....etc

[:=Read Full Message Here=:]

please send me the full information on Adaptive Piezoelectric energy harvesting circuit for seminar purpose. ....etc

[:=Read Full Message Here=:]

This seminar describes an approach to harvesting electrical energy from a mechanically excited piezoelectric element. A vibrating piezoelectric device differs from a typical electrical power source in that it has a capacitive rather than inductive source impedance, and may be driven by mechanical vibrations of varying amplitude.

An analytical expression for the optimal power flow from a rectified piezoelectric device is derived, and an ?energy harvesting ? circuit is proposed which can achieve this optimal power flow.

The harvesting cir ....etc

[:=Read Full Message Here=:]

Abstract— Computational Private Information Retrieval (cPIR) protocols allow a client to retrieve one bit from a database, without the server inferring any information about the queried bit. These protocols are too costly in practice because they invoke complex arithmetic operations for every bit of the database. In this paper, we present pCloud, a distributed system that constitutes the first attempt toward practical cPIR. Our approach assumes a disk-based architecture that retrieves one page with a single query. Using a striping technique, ....etc

[:=Read Full Message Here=:]

Introduction
This seminar describes an approach to harvesting electrical energy from a mechanically excited piezoelectric element. A vibrating piezoelectric device differs from a typical electrical power source in that it has a capacitive rather than inductive source impedance, and may be driven by mechanical vibrations of varying amplitude.

An analytical expression for the optimal power flow from a rectified piezoelectric device is derived, and an energy harvesting circuit is proposed which can achieve this optimal power flow. The harves ....etc

[:=Read Full Message Here=:]

hi
i have downloaded this topic frm the following link

http://studentbank.in/report-Adaptive-Piezoelectric-energy-harvesting-circuit--5382

it is not being opened.
can you please mail me either pdf or ppt or doc of this topic to [email protected] ?

i have sem on monday22.02.10

please reply as soon as possible..

thanking in advance. ....etc

[:=Read Full Message Here=:]

I. INTRODUCTION
The need for a wireless electrical power supply has spurred an interest in piezoelectric energy harvesting, or the extraction of electrical energy using a vibrating piezoelectric device. Examples of applications that would benefit from such a supply are a capacitively tuned vibration absorber ,a foot-powered radio tag and a Pico Radio .A vibrating piezoelectric device differs from a typical electrical power source in that its internal impedance is capacitive rather than inductive in nature, and that it may ....etc

[:=Read Full Message Here=:]

Abstract
This seminar investigates and compares the efficiencies of four different interfaces for vibration-based energy harvesting systems. Among those four circuits, two circuits adopt the synchronous switching technique, in which the circuit is switched synchronously with the vibration. In this study, a simple source-less trigger circuit used to control the synchronized switch is proposed and two interface circuits of energy harvesting systems are designed based on the trigger circuit. To validate the effectiveness of the proposed circuit ....etc

[:=Read Full Message Here=:]

Abstract
This seminar describes an approach to harvesting electrical energy from a mechanically excited piezoelectric element. A vibrating piezoelectric device differs from a typical electrical power source in that it has capacitive rather than inductive source impedance, and may be driven by mechanical vibrations of varying amplitude. The harvesting circuit consists of an AC-DC rectifier with an output capacitor, an electrochemical battery, and a switch-mode DC-DC converter that controls the energy flow into the battery. An analytical expre ....etc

[:=Read Full Message Here=:]