This article is presented by:Professor
Energy Technology Consultant
Department of Mechanical Engineering
Indian Institute of Technology, Mumbai 400 076 INDIA

OUTLINE OF PRESENTATION
•Need and Scope for Heat Pumps
•Applications of Super Heat Recovery Water Heater and Heat Pumps
....etc

[:=Read Full Message Here=:]

PERISTALTIC SELF INFLATING TYRE SYSTEM



SYNOPSIS

This project “LINE FOLLOWER VEHICLE” is carried out in our college.
To get an exposure about the Pre final year mini project, the university has included in our curriculum this semester.
The design and manufacturing are one of the major parts of the Mechanical Engineering branch. Hence in this project we have designed and fabricated a line follower which helps in load carrying application.
We ha ....etc

[:=Read Full Message Here=:]

ROLLER FREE, MINIATURE, PERISTALTIC PUMP WITH RECIPROCATING ACTUATOR
Seminar Report
By
MANU.V.S
S7 MECHANICAL ENGINEERING
(PTDC)
DEPARTMENT OF MECHANICAL ENGINEERING
COLLEGE OF ENGINEERING
THIRUVANANTHAPURAM
2010


ABSTRACT
The conventional modes of pumping are centrifugal, reciprocating, gear pump, lobe pump, vane pump etc. But these types of pumping cannot be used in delicate areas such as medical field, labs, pumping different types of fluids etc. Bec ....etc

[:=Read Full Message Here=:]

Its a little bit urgent... I want to submit my seminar report about the topic peristaltic  as soon as possible ....etc

[:=Read Full Message Here=:]

RECIPROCATING PUMPS

each stroke displaces a definite quantity of liquid, regardless of the resistance against which the pump is operating. The standard way of designating the size of a reciprocating pump is by giving three dimensions, in the following order: 1. The diameter of the steam piston 2. The diameter of the pump plunger 3. The length of the stroke For example, a 12- by 11- by 18-inch-reciprocating pump has a steam piston 12 inches in diameter, a pump plunger 11 inches in diameter, and a stroke of 18 inc ....etc

[:=Read Full Message Here=:]

COMPRESSORS, PUMPS, AND PIPELINE FITTINGS

B. S. Zakharov



It is shown that when sucker-rod pumps are used, fluid leakage in seals of plunger-cylinder and valve pair
through hole and radial slot is proportional to the area of the flow section and is also dependent on the
shape of the latter. A new type of mechanical seal has been developed that reduces leakage significantly
and increases efficiency and nonfailure operating life of piston or plunger pumps.
The key operational parameters of sucker-r ....etc

[:=Read Full Message Here=:]

PERISTALTIC PUMP
ABSTRACT
A peristaltic pump is provided having an adjustable flow regulation provided by an adjustable axial elongation means for the variable elongation of resilient tubing disposed between the associated rotors of a rotary peristaltic pump or the plurality of reciprocal pushers or fingers in a linear peristaltic pump to provide a radial compression of successive sections of the resilient tubing. The rotary or linear peristaltic pump includes a calibrated display and a variable speed electric motor having forward and rever ....etc

[:=Read Full Message Here=:]

GSM based Control Panel for Agricultural and Domestic Water Pumps


Controlling devices using wired switches are common. A few years back
controlling devices using wireless remote control switches like infrared remote control
switch, RF based remote control switches were used. But these technologies have their
own limitations in terms of operation and range.


V Tec Electronics India has introduced a Control Panel Device for Agricultural
and Domestic Pump sets, ....etc

[:=Read Full Message Here=:]

1.INTRODUCTION

A pump is a machine that draws a fluid into itself through an entrance port and forces the fluid out through a machine that draws a fluid into itself through an entrance port and forces the fluid out through an exhaust port. A pump may serve to move liquid, as in a cross-country pipeline; to lift liquid, as from a well or to the top of a tall building; or to put fluid under pressure, as in a hydraulic brake. These applications depend predominantly upon the discharge characteristic of the p ....etc

[:=Read Full Message Here=:]

Hydraulic pumps and pressure regulation
A hydraulic pump (Figure 2.1) takes oil from a tank and delivers it to the rest of the hydraulic circuit. In doing so it raises oil pressure to the required level. The operation of such a pump is illustrated in Figure 2.1a. On hydraulic circuit diagrams a pump is represented by the symbol of Figure 2.1b, with the arrowhead showing the direction of flow.
Hydraulic pumps are generally driven at constant speed by a three phase AC induction motor rotating at 1500 rpm in the UK (wi ....etc

[:=Read Full Message Here=:]