Blending is the process of mixing different components to yield a product. Blend optimization and supervisory system (BOSS) is a supervisory controller over the whole blending process in a continuous process industry. It is an application solution, includes the technology and engineering services to achieve maximum product worth at least cost while maintaining specified product quality and satisfying mandated environmental regulations. Linear programming forms a natural technique for optimizing blending operations provided that variou ....etc

[:=Read Full Message Here=:]

Blending is the process of mixing different components to yield a product. Blend optimization and supervisory system (BOSS) is a supervisory controller over the whole blending process in a continuous process industry. It is an application solution, includes the technology and engineering services to achieve maximum product worth at least cost while maintaining specified product quality and satisfying mandated environmental regulations. Linear programming forms a natural technique for optimizing blending operations provided that various quantiti ....etc

[:=Read Full Message Here=:]

can i get Supervisory control and traffic avoidence PPT here ....etc

[:=Read Full Message Here=:]

ABSTRACT
Good people all, of every sort, give ear unto my song , this was the cry
made by thousands of operator running to and fro to detect, analyze and report the fault to their
senior officials and wait for their instructions to be followed. Finally someone heard their cry and a
master system was born. The energy is generated, transmitted, distributed and finally utilized. At
every stage certain supervision, control and protection is neces sary. This paper deals with basic
SCADA system, its components, basic block ....etc

[:=Read Full Message Here=:]

INTRODUCTION
1.1 OBJECTIVE
The goal of the project is to supervisory the vehicle and it gives the annunciation. This device provides the safe journey for vehicle drivers by giving necessary Voice instructions. Whenever the vehicle driver forgets to taking the safety measurements during the journey, there will be a speaker which will give the voice announcement.
The purpose of this project is to avoid accidents by our side by knowing the status of the vehicl ....etc

[:=Read Full Message Here=:]

Introduction
Increasing demand for information exchange is a characteristic of modern civilisation. The transfer of information from the source to its destination has to be done in such a way that the quality of the received information should be as close as possible to the quality of the transmitted information.

The information to be transmitted can be machine generated (e.g., images, computer data) or human generated (e.g., speech). Regardless of its source, the information must be translated into a set of signals optimized for the channe ....etc

[:=Read Full Message Here=:]

Turbo Codes

Increasing demand for information exchange is a characteristic of modern civilisation. The transfer of information from the source to its destination has to be done in such a way that the quality of the received information should be as close as possible to the quality of the transmitted information.The information to be transmitted can be machine generated (e.g., images, computer data) or human generated (e.g., speech). Regardless of its source, the information must be translated into ....etc

[:=Read Full Message Here=:]

PC Based Supervisory Control And Data Acquisition System



ABSTRACT
The aim of the project is to read the status of industrial machines which is connected to 8 channel ADC by sensors. It will send the readings of ADC as a message through MAX 232 to PC.

One of the 8051s many powerful features is its integrated UART, otherwise known as a serial port. The fact that the 8051 has an integrated serial port means that you may very easily read and write values to ....etc

[:=Read Full Message Here=:]

Intelligent Electronic Devices (IEDs) and Supervisory Control and Data Acquisition (SCADA).



Abstract

Automation of electric power distribution in a cost-efficient and reliable manner can be accomplished by complete automation of the load dispatch centers and substations on a large scale. For efficient load balancing among the feed lines, a continuous monitoring of parameters, such as voltage, current in the line, temperature, pressure, and oil level of the transformers is required. Currently, automati ....etc

[:=Read Full Message Here=:]

SCADA stands Supervisory Control and Data Acquisition. As the name indicates, it is not a full control system, but rather focuses on the supervisory level. It is a computer system for gathering and analyzing real time data. SCADA systems are used to monitor and control a plant or equipment in industries such as telecommunications, water and waste control, energy, oil and gas refining and transportation. A SCADA system gathers information, such as where a leak on a pipeline has occurred, transfers the informat ....etc

[:=Read Full Message Here=:]