In recent years subcritical multiplying structures driven by an external neutron source have been proposed for long-lived product transmutation and for safe and acceptable energy production. The study of the dynamics of these systems needs the adaptation of current methods in order to properly reproduce the peculiar features of source-driven systems.The seminar addresses the recent activities carried out by the Reactor Physics Group of Politecnico di Torino on the neutron kinetics of source-driven systems. The basic physical aspects of the time ....etc

[:=Read Full Message Here=:]

In machine learning methods, when the input data becomes extremely large, the current direct methods
require too large learning times and memory. This project investigates one sequential method to overcome this
problem. It is quite a simple method to implement and is tested using the Perceptron as the base classifier. The
perceptron converges very slowly. So it will be interesting to find out if the proposed accelerator can improve
significantly the computational times of this simple classifier. The student will try various investigations o ....etc

[:=Read Full Message Here=:]

Particle reinforced MMC?s are now being produced commercially and in this paper the various processing techniques used for the production of aluminium composites and factors affecting their quality are overviewed. The various techniques like powder metallurgy, spray deposition, molten metal infiltration, molten metal mixing, liquid metallurgy, compo-casting technique etc. The factors affecting the uniform dispersion of the composites and the various properties of the metal matrix composites are also discussed. Aluminium alloy matrix particulate ....etc

[:=Read Full Message Here=:]

SYNOPSIS

Non- destructive estimation of particle size of finished products is essentially required to judge their suitability for intended applications. For this estimation, a ceramic heating element (SiC rod) of a heat Treatment furnace at 1400 Degree celcius has been chosen. The particle size has been estimated with the proposed method based on counting reflection spots in a back reflection X-Ray pattern. Calibration curve has been drawn on the basis of the data obtained by standard sieve me ....etc

[:=Read Full Message Here=:]

Particle Swarm Optimization Algorithm and Its Application in Engineering Design Optimization

The Particle Swarm Optimization (PSO) method was originally proposed by J.Kennedy as a simulation of social behavior, and it was insitially introduced as an optimization method in 1995 (Eberhart and Kennedy, 1995). The PSO is a robust stochastic evolutionary computation technique based on the movement and intelligence of swarms looking for the most fertile feeding location. PSO's foundation is based on the principle that each solution ....etc

[:=Read Full Message Here=:]

In machine learning methods, when the input data becomes extremely large, the current direct methods
require too large learning times and memory. This project investigates one sequential method to overcome this
problem. It is quite a simple method to implement and is tested using the well-known LDA classifier. The student
will try various investigations on different very large data sets and to measure their computational complexities. It
has been shown that this sequential method is very fast and only need a small subset of the large data s ....etc

[:=Read Full Message Here=:]

Thermophoresis is a phenomenon of the movement of small particles in a gas with a temperature gradient towards the cooler region of the gas. Small particles, such as dust, when suspended in a non-isothermal gas, experience a force in the direction opposite to the temperature gradient. This force, known as the thermophoretic force plays an important role in the mass transfer mechanism of several devices involving sub-micron and micron sized particles and a large thermal gradient, and it is often cited as an important one influence the efficiency ....etc

[:=Read Full Message Here=:]

Abstract
In many areas of the world, finding the type of timber or particle board needed to build a good quality wooden board is becoming a problem. As a result, particle board is beginning to be used by many wooden photo laminators. The information provided in this project report relates specifically to the production of an open fishing photo lamination. It is a simple, easily-formed, room worthy thing. Its general-purpose design is suitable for inside the room/office or around the area.
A general basic knowledge in the use of polyest ....etc

[:=Read Full Message Here=:]

Download Accelerator letââšÂ¬Ã¢žÂ¢s to noticeably increase the speed of file download from the Internet using HTTP, HTTPS and FTP protocols. The acceleration is achieved by splitting a file being downloaded into several parts and downloading these parts at the same time. Download Accelerator resumes broken downloads from where they left off.

Download Accelerator effectively solves three of the biggest problems when downloading files: speed, resuming broken downloads, and managemen ....etc

[:=Read Full Message Here=:]

Hi,
I am thankful to you for providing me necessary details for my seminar topic.thanks


But nw i want the total workflow of my project that is
Multi-threaded Segmented Download Accelerator using Plug-in Architecture. by using dot net technology.


I also dfds and UML diagrams of my project.

Plzzzzzzzzz do help me.I will be very thankful to you. ....etc

[:=Read Full Message Here=:]