Efficient Bandwidth management for MBLL part route - IEEE/ACM TRANSACTIONS ON NETWORKING, VOL. 16, NO. 2,–java

Abstract—As service providers move more applications to their IP/MPLS (Multiple Protocol Label Switching ) backbone networks, rapid restoration upon failure becomes more and more crucial. Recently MPLS fast reroute has attracted lots of attention as it was designed to meet the needs of real-time applications, such as voice over IP. MPLS fast reroute achieves rapid restoration by computing and signaling backup label swi ....etc

[:=Read Full Message Here=:]

Jet impingement heat transfer – Part I: Mean and root-mean-square heat transfer and velocity distributions
Abstract
Impinging jets provide a means of achieving high heat transfer coefficients both locally and on an area averaged basis. The currentwork forms the first stage of a two part investigation of heat transfer distributions from a heated flat surface subject to an impinging airjet for Reynolds numbers from 10,000 to 30,000 and non-dimensional surface to jet exit spacing, H/D, from 0.5 to 8. In the present paper,the rel ....etc

[:=Read Full Message Here=:]

1.According to__________Marketing Management is the marketing concept in action.
(A)Philip Kotler
(B)Neil Borden
(C )William J. Standon
(D)R.L King

2.__ ___ ____is the process whereby individuals decide whether, what, when, wliere, how
and from whom to purchase goods and services.
(A)Marketing
(B)Consumer Behaviour
(C )Market Segmentation
(D)Consumer Orientation

3.___________consists of product planning and development, pricing, channels of distribution,
sales force, advertising, sales promotion, physical ....etc

[:=Read Full Message Here=:]

Hi,
I am quite impressed with this site and the contributions. I am happy that I am part of this site and I wish to contribute regularly.
Thanks ....etc

[:=Read Full Message Here=:]

hi.
i am working on simulation of laser cladding of copper powder over steel in ansys workbench. so, if you have any idea regarding how can i find
1)heat affected zone during laser cladding
2)stress generated during laser cladding
3)deformation in steel plate due to cladding of copper over steel plate.
then please me guide. ....etc

[:=Read Full Message Here=:]

Selective and Authentic Third Part Distribution of XML Documents (Java)
IEEE Transactions on Knowledge and Data Engineering, Vol. 16, No. 10,

Abstract:
Third-party architectures for data publishing over the Internet today are receiving growing attention, due to their scalability properties and to the ability of efficiently managing large number of subjects and great amount of data. In a third-party architecture, there is a distinction between the Owner and the Publisher of information. The Owner is the producer of information, whe ....etc

[:=Read Full Message Here=:]

ABSTRACT
The detection of moving object is important in many tasks, such as video surveillance and moving object tracking. Although there are some methods for the moving object detection, it is still a challenging area. In this paper, a new method which combines the Kirsch operator with the Optical Flow method (KOF) is proposed. On the one hand, the Kirsch operator is used to compute the contour of the objects in the video. On the other hand, the Optical Flow method is adopted to establish the motion vector field for ....etc

[:=Read Full Message Here=:]

please send matlab code for Moving Object Detection Based On Kirsch Operator Combined With Optical Flow to the email [email protected] ....etc

[:=Read Full Message Here=:]

NO-MOVING-PART
HYBRID-SYNTHETIC JET ACTUATOR
Article Outline
1. Introduction
2. The actuator model
2.1. General
2.2. Amplifier
2.3. Feedback loop
3. Results
3.1. Oscillation frequency
3.2. Modified Strouhal number
3.3. Constant Strouhal number regime
3.4. Constant propagation velocity regime
4. Conclusions
Acknowledgements
References
1. Introduction

Actuators based on the synthetic jet idea are currently becoming of increasing importance for a number of applications, especially involving control of flo ....etc

[:=Read Full Message Here=:]

1. Explain the differences between Server-side and Client-side code? Server side scripting means that all the script will be executed by the server and interpreted as needed. ASP doesn’t have some of the functionality like sockets, uploading, etc. For these you have to make a custom components usually in VB or VC++. Client side scripting means that the script will be executed immediately in the browser such as form field validation, clock, email validation, etc. Client side scripting is usually done in VBScript or JavaScrip ....etc

[:=Read Full Message Here=:]