Jet impingement heat transfer – Part I: Mean and root-mean-square heat transfer and velocity distributions
Abstract
Impinging jets provide a means of achieving high heat transfer coefficients both locally and on an area averaged basis. The currentwork forms the first stage of a two part investigation of heat transfer distributions from a heated flat surface subject to an impinging airjet for Reynolds numbers from 10,000 to 30,000 and non-dimensional surface to jet exit spacing, H/D, from 0.5 to 8. In the present paper,the rel ....etc

[:=Read Full Message Here=:]

MY SELF SUNIL DHYANI CONTACT NO. 9259914404 WANT TO GET PROJECT REPORT ON HEAT TRANSFER ....etc

[:=Read Full Message Here=:]

HEAT AND MASS TRANSFER


1. Define Heat transfer?
Heat transfer can be defined as the transmission of energy from one region to another region to
temperature difference.

2. What are the modes of heat transfer?
1. Conduction
2. Convection
3. Radiation

3. What is conduction?
Heat conduction is a mechanism of heat transfer from a region of high temperature to a region of
low temperature with in a medium (Solid, liquid or Gases) or diffe ....etc

[:=Read Full Message Here=:]

Abstract

A response surface model of the luminous flame emissivity of sodium pool fire has been proposed for use in safety analysis computer codes of a liquid metal fast reactor. The liquid sodium burns in air resulting in not only heat generation but also release of sodium oxide aerosols of sub-micron diameters. Aerosols levitating in air are radiative and they influence the allocation of combustion heat from the flame to atmospheric gas or sodium pool. The emissivity of the flame needs to be quantified, as it is one of user-specified param ....etc

[:=Read Full Message Here=:]

Presented by:
N.Chandrasekaran


Heat transfer from the Human Body
Why?
 It is a common experience to feel “chilly” in winter and “warm” in summer in our homes even when the thermostat setting is kept same.
Problem
Consider a person standing in a room maintained at 220C at all times. The inner surfaces of the walls, floors and ceiling of the house are at 10oc in winter and 25oC in summer. (Aperson = 1.4m2, Tperson = 300C, εskin = 0.95)
Qrad,winter = εσAs(Ts4 � ....etc

[:=Read Full Message Here=:]

DjtmtjapjmTjdgumjpxjgugumjpupvdmtpgmtpglngjmtpgajptnjgtwjpuwdjgpm ....etc

[:=Read Full Message Here=:]

HEAT TRANSFER FROM EXTENDED SURFACES



OVER VIEW OF HEAT TRANSFER
Heat transfer can be defined as the process by which energy transport takes place. When two physical bodies (object or fluid) are at different temperatures than transfer of thermal energy is known as Heat Transfer.

This occurs in such a way that the body and the surroundings reach thermal equilibrium. Thus, heat always flows spontaneously from a hot material to a cold one. It obeys 2nd Law of Ther ....etc

[:=Read Full Message Here=:]

High Conductance Heat Transfer Using Solar Heat Pipe Collector

presented by :-
MR. SHIVAJI D. YADAO1, MR. PRMENDRA J BANSOD2
Dr. D.Y.Patil Institute of Engg. & Tech.,Pune University, Pune,
Dr. D.Y.Patil Institute of Engg. & Tech.,Pune University, Pune,

abstract
In recent years it has become increasingly important to develop methods for efficient transport of thermal energy from one location to another. Moreover the advent of the space age has stimulated research for heat transfer devices which are ....etc

[:=Read Full Message Here=:]

Presented by:
A.JohnBritto
C.Kanaga Raj
P.Senna Kesavan
A.VinothHEAT TRANSFER PERFORMANCE IN 3D INDUCED FINNED HEAT PIPE

ABSTRACT
3D induced finned steel-water heat pipe is carried out in this project.

All the main parameters that can significantly influence the heat transfer performance of heat pipe ,such as working temperature, heat flux, inclination angle, working fluid fill ratio (defined by the evaporatio ....etc

[:=Read Full Message Here=:]

....etc

[:=Read Full Message Here=:]