DESIGN OF PRESSURE VESSEL

ABSTRACT
This project work deals with a detailed study and design procedure of pressure vessel. A detailed study of various parts of pressure vessels like shell, closure, support, flanges, nozzles etc. Design is carried according to rules of ASME code section VIII, Division I.
The first chapter deals with detailed study of pressure vessel i.e. the various materials used in pressure construction and temperature are mentioned .It also deals with the study of various parts like flanges, support e ....etc

[:=Read Full Message Here=:]

DESIGN OF BOILER STACK
ABSTRACT
Chimney, which form the last component of a system using a flue gas such as feoiler, IC engines, play a vital role in maintaining efficiency, draft, etc, of a system and also in minimizing the atmospheric pollution.
The boiler plant of HOCL had used LSHS (low Sulphur heavy stock) as a fuel. Recently they changed the fuel to LSFO (low Sulphur furnace oil). As a combined effect of increased corrosion rate and natural calamities the stack had undergone failure. As per the Kerala State Polluti ....etc

[:=Read Full Message Here=:]

155/2015
Maximum : 100 marks
Time : 1 hour and 15 minutes

1.The maximum twisting moment a shaft can resist, is the product of the 
permissible shear stress and:
(A)Moment of inertia
(B) Polar moment of inertia
(C ) Polar modulus
(D) Modulus of rigidly

2.A beam of length L is pinned at both ends and is subjected to a 
concentrated bending couple of moment M at its centre. The maximum bending 
moment in the beam is :
(A)ML/2
(B)M
(C )M/3
(D)M/2

3.In plastic analysis, the shape factor for a triangular ....etc

[:=Read Full Message Here=:]

{Religious|Spiritual|Faith based|Non secular|Strict|Orlando|Christian|Devout|Alfredia|Psychic|Roscoe} {views|sights|opinions|landscapes|vistas|ideas|perspectives|thoughts|viewpoints|feelings|suggestions} {should be|ought to be|needs to be|must be|really should be|need to be|should really be|has to be|have to be|could be|will be} {in the|within the|inside the|from the|inside|while in the|during the|with the|on the|in your|through the} openThe {editorial|content|article|periodical|column|magazine} 鈥淭ake {a|the|any|a new|some sort of|your|a go ....etc

[:=Read Full Message Here=:]

FINITE ELEMENT ANALYSIS ON ANGLE PLATE
ABSTRACT
The finite element method (FEM) (sometimes referred to as finite element analysis) is a numerical technique for finding approximate solutions of partial differential equations (PDE) as well as of integral equations. The topic of the seminar includes the study of Finite Element Analysis and a case study of finite element analysis.
A double angled web connection is modeled and analyzed to predict the behavior of the angle plate using finite element analysi ....etc

[:=Read Full Message Here=:]

This work was done at the college of engineering, trivandrum


1. INTRODUCTION

Reusable launch vehicles are designed to be used repeatedly. Since they are reused, RLV’s are expected to dramatically reduce the cost of accessing the space. Current design objectives are to make access to space a routine event, to achieve airplane like operation. The RLV flight trajectory consists of different phases such as ascent phase, coast phase and descent phase. At these diff ....etc

[:=Read Full Message Here=:]

Summary
This paper proposes a new approach investigating the applicationof moment method to evaluate a set of candidate features and toselect an informative subset to be used as input data for a neuralnetwork classifier. The first step (pre-processing) of proposedmethod takes into account the discriminative properties ofinvariant krawtchouk moments. The second step (recognition) isachieved by using multilayer feedforward neural network(MFNN) as a classifier with the stochastic back propagation as alearning algorithm. Finite vectors obt ....etc

[:=Read Full Message Here=:]

Can i get the seminar report on hand gesture based remote control ....etc

[:=Read Full Message Here=:]

DESIGN, FABRICATION AND PERFORMANCE EVALUATION OF GARDEN TILLER

ABSTRACT
In order to meet the food requirements of the growing population and rapid industrialization, modernization of agriculture is inescapable. Mechanization enables the conservation of inputs through precision in metering ensuring better distribution, reducing quantity needed for better response and prevention of losses or wastage of inputs applied. Mechanization reduces unit cost of production through higher productivity and input conservation.
The p ....etc

[:=Read Full Message Here=:]

Good responsive website for user interface. ....etc

[:=Read Full Message Here=:]

1.The unit of force in S.I. system of units is :
(A) Dyne(B)KilogramKilogram
(C ) Newton(D)Watt •

2.One kg force is equal to :
(A) 9.8 N(B)7.8 N
(C ) 8.9 N(D)12 N

3.The angle between two forces when the resultant ismaximum and minimum respectively ore :
(A) 180° and 0°(B)0° and 180°
(C ) 90° and 180°(D)90° and 0°

4.If the resultant of two equal forces has the samemagnitude as either of the forces, the angle between the two forces is :
(A) 30°(B)60°
(C ) 90°(D)120°

5.The resultant of the two ....etc

[:=Read Full Message Here=:]

STRUCTURAL DESIGN OF DRYDOCK FRONTAGE DREDGING SYSTEM

EXECUTIVE SUMMARY
In the present era of globalization, transportation has an important role, being the cheapest mode of transport, ships and boats contribute much to business and industry. Their repair maintenance and manufacturing are carried out in docks. The moment of floating crafts towards and outward the dock faces the problem of mud deposits on the path. In order to maintain an accident free dock, these mud deposits are to be removed off periodically. This pro ....etc

[:=Read Full Message Here=:]