Presented By:
H-L Lin1, T Chou2, and C-P Chou2
Department of Vehicle Engineering, Army Academy R.O.C
Abstract:
Many parameters affect the quality of the resistance spot welding (RSW) process. It is not easy to obtain optimal parameters of the RSW process in the automobile industry. Conventionally, the Taguchi method has been widely used in engineering; however, with this method the desired results can only be obtained with the use of very discrete control factors, thus leading to uncertainty about the real optimum. In the process ....etc

[:=Read Full Message Here=:]

i want modelling and thermal analysis of diesel engine piston with catia and ansys pdf material ....etc

[:=Read Full Message Here=:]

i need a linear block cade program using verilog or vhdl ....etc

[:=Read Full Message Here=:]

Power Factor Correction of Linear and Non-linear Loads Employing a Single Phase Active Power Filter Based on a Full-Bridge Current Source Inverter Controlled Through the Sensor of the AC Mains Current
Abstract:
In the last years the number of non-linear loads has been increasing rapidly. This non-linear load had drawn a current form the AC Mains with harmonic components, leading to low power factor, low efficiency, interference by the EMI, among others. A classic solution is the use of passive filters, which ....etc

[:=Read Full Message Here=:]

DESIGN AND MODELLING OF CUPOLA

DONE BY
CEASE JUNIOR
FIJO GEORGE
FOUZIYA C M
HAREESH MOHANAN
JESBIN JOSE
JIBIN JOSEPH

CONTENTS
OBJECTIVE OF PROJECT
INTRODUCTION
CONSTRUCTION
CUPOLA OPERATIONS
ADVANTAGES AND LIMITATIONS
DESIGN CONSIDERATIONS
DESIGN
FABRICATION DETAILS
BIBLIOGRAPHY

OBJECTIVE OF PROJECT
TO DESIGN AND FABRICATE A MODEL OF SIZE 2 CUPOLA IN THE RATIO 1:2
FURNACES
FURNACES ARE OF TWO TYPES
1. BLAST FURNACES
2. FOUNDRY FURNACES
Blast furnaces performs basic melt ....etc

[:=Read Full Message Here=:]

Syndrome algarithm for decoding in matlab ....etc

[:=Read Full Message Here=:]

Abstract

In paper the fundamental question about optimal interaction between the controlling stimuli generated by the active (powered) and the passive (unpowered) drives of the robotic systems have been studied. A mathematical statement of the problem has been proposed that is suitable to study this question for the semi-passively actuated n-degree-of-freedom robotic systems. The problem is formulated as an optimal control problem for n-degree-of-freedom mechanical system models a semi-passively actuated robot. We take into account the inter ....etc

[:=Read Full Message Here=:]

Moments and Channel Capacity of Single and
Dual-Branch Receivers Over Weibull Fading Channels



ABSTRACT

Diversity combining receivers is the well-known technique used to combat fad-
ing and improve system performance. There are several diversity reception methods
employed in digital communication receivers including maximal-ratio combining, se-
lection combining and switched diversity. Among the combining methods, switched
diversity offers one of the least complexity solution for fading mitigation and ....etc

[:=Read Full Message Here=:]

LINEAR BLOCK CODE AS ERROR CONTROL CODING

PRESENTED BY:
NAME: DEBIKA DEY
SILIGURI INSTITUTE OF TECHNOLOGY

OVERVIEW:

SIMPLIFIED MODEL OF DIGITAL COMMUNICATION SYSTEM.
ERROR CONTROL CODING.
CLASSIFICATION OF ECC.
BLOCK CODES.
HAMMING CODE.
HAMMING DISTANCE & HAMMING WEIGHT.
PROPERTIES OF LBC.
GENERATOR MATRIX.
PARITY CHECK MATRIX.
RELATION BETWEEN G & H & C
DECODING OF A LINEAR CODE.
SYNDROME DECODING.
APPLICATION.
ADVANTAGES & DISADVANTAGES.


Simplified Model of Digital ....etc

[:=Read Full Message Here=:]

can anyone provide me with information on topic Microstructural modelling of branched block and linear block polyolefins ....etc

[:=Read Full Message Here=:]