ELECTRONIC FUEL INJECTION SYSTEM


1. INTRODUCTION

 In developed and developing countries considerable emphasis is being laid on the minimization of pollutants from internal combustion engines. A two-stroke cycle engine produces a considerable amount of pollutants when gasoline is used as a fuel due to short-circuiting. These pollutants, which include unburnt hydrocarbons and carbon monoxide, which are harmful to beings. Ther ....etc

[:=Read Full Message Here=:]

i want to study the complete about mpfi and carburettor system ....etc

[:=Read Full Message Here=:]

INTRODUCTION
You must have seen cars with specifications which mention words like MPFI and CRDI or CRDE. To an automotive engineer or enthusiast, it means something, but for a common man, it may not make much sense.
MPFI means – Multi-point Fuel-Injection


The term MPFI is used to specify a technology used in Gasoline/petrol Engines. For Diesel Engines, there is a similar technology called CRDI. MPFI System is a system which uses a small computer to control the Car’s Engine. A Petrol car’s engine u ....etc

[:=Read Full Message Here=:]

, fuel supply system ppt ....etc

[:=Read Full Message Here=:]

SEMINAR REPORT ON
DIGITAL FUEL INJECTION SYSTEM

Presented by
NIRAN.I.R
DEPARTMENT OF MECHANICAL ENGINEERING
S.N.M. COLLEGE OF ENGINEERING
ERNAKULAM

ABSTRACT

DIGITAL FUEL INJECTION SYSTEM

The fuel injection system supplies the engine with a combustible air-fuel mixture. Modern cars have a digital engine control system. It controls the ignition and the fuel injection systems.
Technological developments in the automobile field resulted in the digital fuel injection ....etc

[:=Read Full Message Here=:]

Fuel Injection Pressure Effect on Performance of Direct Injection Diesel Engines Based on Experiment
Abstract
Ever increasing rate in the production of fuel injection vehicles and the significance of decreasing the pollutions in nature trigger numerous researches in optimizing the fuel injection system and recognizing the fuel behavior as well as the process of preparation of mixtures in the inlet port of fuel injection vehicles. Fuel injection pressures in diesel engine plays an important role for engine perf ....etc

[:=Read Full Message Here=:]

NOx REDUCTION BY FUEL WATER EMULSION INJECTION
Jithin Syam P.S
S7 Mechanical-A
Roll No:20



Overview
History
Formation and harmful effects of NOx
Reduction Techniques of NOx
Water fuel emulsification technique
Method of injection
Advantages and Dis advantages.

History
The nitrogen oxide reduction technology based on fuel water emulsion injection (FWE), developed by MAN B&W Diesel.
Formation of NOx
Prompt NOx
Frequently obser ....etc

[:=Read Full Message Here=:]

ROTARY DISTRIBUTOR DIESEL FUEL INJECTION PUMP

Stanadyne, Inc.
Diesel Systems Division
Windsor, Connecticut
National Historic Engineering Landmark





HISTORY


The year was 1947. The place was Hartford, Connecticut. Diesel power was about to make an historic move forward. At that time, the world of high-speed diesel power in the U.S. was very limited. Less than 5 percent of all engines being built, even for nonautomotive applications, were diesels. Diesel power had ....etc

[:=Read Full Message Here=:]

FUEL INJECTION IN THE SPARK IGNITION ENGINE



Merits of Fuel Injection in the SI Engine
Absence of Venturi ....etc

[:=Read Full Message Here=:]

presented by:
SATYENDRA VERMA


FUEL INJECTION PROCESS
Introduction
The internal combustion engine is an engine in which the combustion of a fuel (normally a fossil fuel) occurs with an oxidizer (usually air) in a combustion chamber. In an internal combustion engine the expansion of the high-temperature and -pressure gases produced by combustion applies direct force to some component of the engine, such as pistons, turbine blades, or a nozzle. This force moves the component over a distance, generating useful me ....etc

[:=Read Full Message Here=:]