1. OBJECTIVES

• The combustive properties of hydrogen that relate to its use as a combustive fuel
• The air/fuel ratio of hydrogen fuel mixtures and how it compares to other fuels
• The types of pre-ignition problems encountered in a hydrogen internal combustion engine and their solutions
• The type of ignition systems that may be used with hydrogen internal combustion engines
• Crankcase ventilation issues that pertain to hydrogen use in an internal combustion engine
• The thermal efficiency of hydrogen internal comb ....etc

[:=Read Full Message Here=:]

Improvement In The Operating Characteristics Of
Internal Combustion Engine Using Variation In
Compression Ratio

Yadav Milind S.1, Wankhade P.A.2
1Finolex Academy of Management & Technology, Ratnagiri - 415639, Maharashtra, India
Email: [email protected]
2Veermata Jijabai Technological Institute, Mumbai - 400019, Maharashtra, India


Abstract - Vast developments are taking place in the field of
internal combustion engine especially to improve the fuel
economy and to reduce the emission percentage in the
exhaust ga ....etc

[:=Read Full Message Here=:]

EGR SYSTEM FOR INTERNAL COMBUSTION ENGINE AND METHOD FOR CONTROLLING THE SAME

Abstract:

An EGR system includes a high-pressure EGR passage that provides communication between an exhaust pipe, at a portion upstream of a turbine of a turbocharger, and an intake pipe, at a portion downstream of a compressor; a low-pressure EGR passage that provides communication between the exhaust pipe, at a portion downstream of the turbine, and the intake passage, at a portion upstream of the compressor; an ....etc

[:=Read Full Message Here=:]

Dear Sir,
Since I have to prepare for the seminar topic called 'IC-ENGINES WITH HOMOGENEOUS COMBUSTION IN POROUS MEDIUM', I need a presentation about this topic. So I request you to send me the presentation as soon as possible.
....etc

[:=Read Full Message Here=:]

INTERNAL COMBUSTION (IC) ENGINE


OBJECTIVES

To understand the operational principles and basic mechanisms of the internal combustion engine

ENGINE BASICS (1)
Purpose of an IC engine
to convert fuel (petrol, diesel, NGV) into motion to move your car by burning the fuel inside an engine (internal combustion engine)
There are different kinds of IC engines
Spark ignition (SI) or petrol engine
Compression ignition (CI) or diesel engines
Rotary ....etc

[:=Read Full Message Here=:]

i like the ic engine book whih is made by sharma and mathur
i would like to download the pdf of this book ....etc

[:=Read Full Message Here=:]

i want to dowm load the pdf of ic engine by sharma and mathur
i want free download internal combustion engine by mathur and sharma pdf ....etc

[:=Read Full Message Here=:]

Internal combustion engine
The internal combustion engine is an engine in which the combustion of a fuel (generally, fossil fuel) occurs with an oxidizer (usually air) in a combustion chamber. The expansion of high temperature and pressure gases produced by the combustion applies force to a movable component of the engine(piston, turbine blade etc.) moves it over a distance, generates useful mechanical energy.

GASOLINE DIRECT INJECTION:
The major advantages of a GDI engine are increased fuel efficiency and hi ....etc

[:=Read Full Message Here=:]

EFFECT OF NEGATIVE SUPERCHARGING ON INTERNAL COMBUSTION
ENGINE


ABSTRACT
Until recently, Automobile manufacturers uses supercharger & turbocharger to supply
air-fuel mixture at a pressure above atmospheric. Up to 40% increase in power & torque may be
obtained by supercharging. As a typical example , in the Chrysler 2.2L turbocharged engine, the
turbocharged provides 35% more torque & 50% more power compared to the same engine
without turbocharger. To achi ....etc

[:=Read Full Message Here=:]

DESIGN OF CONNECTING ROD OF INTERNAL COMBUSTION ENGINE:
A TOPOLOGY OPTIMIZATION APPROACH



ABSTRACT

This paper presents the design connecting rod of internal combustion engine using the
topology optimization. The objectives of this paper are to develop structural modeling,
finite element analyze and the optimization of the connecting rod for robust design. The
structure of connecting rod was modeled utilized SOLIDWORKS software. Finite
element modeling and analysis were performed using MSC/PATRAN and
....etc

[:=Read Full Message Here=:]