Dear Sir,
I would like to have circuit diagram and the associated details for a temperature indicator without using microcontrollers using IC 7107.


Regards, ....etc

[:=Read Full Message Here=:]

DIGITAL voltmeter using ICL7107 WITH THE FOLLOWING SPECIFICATION supply voltage +/-5v , measuring range +/-0 to 1999v DC ....etc

[:=Read Full Message Here=:]

hi i want details of this topic ....etc

[:=Read Full Message Here=:]

Because of their excellent high temperature characteristics, Ni-based single-crystal alloys are used in applications where operating temperatures exceed 900ºC. The initiation of cracks under these conditions is generally associated with micro-scale porosities (typically between 10 and 20 microns). A rate-dependent crystallographic constitutive model in conjunction with a mass diffusion model has been used to study crack initiation in single crystal nickel-base superalloys, exposed to an oxidizing environment and subjected to ....etc

[:=Read Full Message Here=:]

hi guys,

i am a new user in this site and this seems to a good site.

and i am trying to do this mini project on blue tooth enabled temperature sensor.
i think it is an awesome idea but the thing is i am in my 2nd year only and my knowledge level in ECE is very limited. :(
i have managed to gather some material but can't make much of it.
so i am asking you my doubts hoping you will be patient and clear my doubts.
so here goes:
DOUBTS:

(1) the process starts off with a thermal s ....etc

[:=Read Full Message Here=:]

Study of High Temperature Crack Initiation in Single Crystal


Because of their excellent high temperature characteristics, Ni-based single-crystal alloys are used in applications where operating temperatures exceed 900ºC. The initiation of cracks under these conditions is generally associated with micro-scale porosities (typically between 10 and 20 microns). A rate-dependent crystallographic constitutive model in conjunction with a mass diffusion model has been used to study crack initiation in single crystal nickel-base superalloys ....etc

[:=Read Full Message Here=:]

SUPERCONDUCTIVITY is the ability of certain materials to conduct electric current with no resistance and extremely low losses. This ability to carry large amounts of currents can be applied to electric power devices such as motors and generators and to electricity transmission in power lines. For example, superconductors can carry as much as 100 times the electricity ordinary copper or aluminium wires of same size.Scientists had been intrigued with the concept of superconductivity since its discovery in the early 1900?s, but the extreme low tem ....etc

[:=Read Full Message Here=:]

Effect of substrate temperature on the growth of ITO thin films
M. Nisha, S. Anusha, Aldrin Antony, R. Manoj, M.K. Jayaraj
*
Optoelectronics Device Laboratory, Department of Physics, Cochin University of Science and Technology,
Kochi 682 022, Kerala, India
Received 2 November 2004; received in revised form 20 February 2005; accepted 20 February 2005
Abstract
Indium tin oxide (ITO) thin films were deposited onto glass substrates by rf magnetron sputtering of ITO target and the
influence of substrate temperature on the properties of the f ....etc

[:=Read Full Message Here=:]

HIGH TEMPERATURE SUPERCONDUCTORS
Historical Background
¢ Kamerlingh Onnes, Dutch physicist in 1911
¢ Meissner and Ochsenfeld
¢ Niobium nitride-16k, in 1941
¢ Vanadium-silicon-17.5k in 1953
¢ First commercial superconducting wire-NbTI,in 1962
¢ BCS Theory in 1957 by Bardeen, Cooper and Schrieffer
¢ Josephson Effect in1962
¢ Organic superconductors in 1964
¢ HTS in 1986 by Muller & Bednorz
¢ Yr,Ba,Cu,O compound- 90k in 1987
¢ Latest ceramic superconductor,Tc=138k, comp ....etc

[:=Read Full Message Here=:]

construct a RC phase shift oscillator to generate frequency of 1.5khz. a SL100 TRANSISTOR is provided with supply voltage of 12v. choose suitable operating point for the transistor amplifier ....etc

[:=Read Full Message Here=:]