1. Arc heating occurs when the air between electrodes of opposite polarity becomes :
(A) Moistened(B)DryDry
(C ) Ionized(D)None of the above

2.The meter used to measure the temperature of a furnace is :
(A) hydrometer(B)pyrometerpyrometer
(C ) hygrometer(D)tachometer

3.Which part is provided in a battery charger to prevent the flow of excessive current into the battery?
(A) Coarse selector(B)Time selector switchTime selector switch
(C ) Limiting resistanceCD)Transformer

4.What will happen to the filter circui ....etc

[:=Read Full Message Here=:]

summer training report on uttarakhand transport corporation for btech Mechanical Engineering ....etc

[:=Read Full Message Here=:]

Z Corporation 3D Printing Technology

Introduction
Originally developed at the Massachusetts Institute of Technology (MIT) in 1993, Three- Dimensional Printing technology (3DP™) forms the basis of Z Corporation’s prototyping process. 3DP technology creates 3D physical prototypes by solidifying layers of deposited powder using a liquid binder. By definition 3DP is an extremely versatile and rapid process accommodating geometry of varying complexity in hundreds of different app ....etc

[:=Read Full Message Here=:]

049/2016
Maximum : 100 marks
Time : 1 hour and 15 minutes

1.The co ordination number of FCC crystal structure is :
(A) 4
(B)C
(C ) 8
(D)12

2.According to Gibb’s phase rule, the number of degrees of freedom of a two 

component, three phase system is:
(A) 3
(B)2
(C ) 1
(D)0

3.Which one of the following is correct for Berger’s vector in screw 

dislocation?
(A) perpendicular to the dislocation line
(B)parallel to the dislocation line
(C ) inclined to the dislocation line
(D)opposite to the dis ....etc

[:=Read Full Message Here=:]

presented by:
VINOD KUMAR BHARTI


INTRODUCTION
 NATIONAL THERMAL POWER CORPORATION
 ESTABLISHED 7th NOVEMEBER 1975
 GOVT. SHARE 89.5%
 NTPC CONTRIBUTES MORE THAN 35% OF INDIA’S POWER NEEDS
 TOTAL POWER PRODUCTION:27,904MW
 15 COAL BASED(22,895MW) & 7 GAS BASED(3,955MW) & FOUR OTHER JOINT VENTURES
 “Centre for Power Efficiency and Environment Protection (CENPEEP)” has been established in NTPC with the assistance of United States Agency for International Development (USAID)
 ....etc

[:=Read Full Message Here=:]

1.The vernier bevel protractor is able to read the angle to an accurancy of _____degrees. The vernier bevel protractor is able to read the angle to an accuracy of
(A)1°
_r
12
(C )1°/2
(B)1/2
(D)11°/2

2.------------method is used in mass production for producing a small length of taper where
accuracy is not the criserion.
(A)Form Tool(B) Tail Stock Offset
(C ) Swivelling Compound rest(D) None of these

3.In tailstock offset taper turning method, the amount of offset is found by the formula :
(A)
(C )
(.D-d) ....etc

[:=Read Full Message Here=:]

1,     Ownership expressed in terms of money is called
A)      Property Account                            B) Capital Account
C) Rea! Account                                   D) Asset Account

2  ....etc

[:=Read Full Message Here=:]

1. While soldering what action is applied on solder?
(A)Capillary action(B)Gravitational force
(C )Electromagnetic force(D)Magnetic action

2.Which one of these a pressure welding method?
(A)ARC welding(B)Gas welding
(C )Resistance welding(D)Thermit(fusion) 

3.Which of the following is not an insulator?
(A)Gold(B)Glass
(C )Mica(D)Wood

4.Which type of fire extinguisher is used in a welding shop?
(A)Form type extinguisher(B) CO2 extinguisher
(C ) Dry powder extinguisher(D) Halon extinguisher

5.The term used ....etc

[:=Read Full Message Here=:]

screeenshots and form designs of the project ....etc

[:=Read Full Message Here=:]

FINANCIAL ANALYSIS OF BIHAR STATE FINANCIAL CORPORATION’S


RATIONALE BEHIND THE STUDY

BSFC will be restructured and strengthened to meet the growing financial and mercantile needs of entrepreneurs.
Although the Government has nominated representatives of Associations of industrial enterprises and Chambers of Commerce in the Board of this Institution a need has been felt to further strengthen the Board with induction of greater number of competent professionals and representative of Chambers and Industries ....etc

[:=Read Full Message Here=:]