notes about cascaded h-bridge multi level inverter
....etc

[:=Read Full Message Here=:]

To fulfill the requirements of traffic on Indian railways it has become necessary to run the vehicle with high speed and heavier loads. With the increase in speed and load of trains the tractive and braking forces on rails will also increase. Consequently, it has become important to investigate the safety of sub-structures of existing bridges. Hence the share of force resisted by individual sub-structural elements should be estimated more accurately than given by the present specifications which are based on a few field trials, and are not real ....etc

[:=Read Full Message Here=:]

InfiniBand is a powerful new architecture designed to support I/O connectivity for the Internet infrastructure.InfiniBand is supported by all the major OEM server vendors as a means to expand beyond and create the next generation I/O interconnect standard in servers. For the first time, a high volume, industry standard I/O interconnect extends the role of traditional €œin the boxes busses. InfiniBand is unique in providing both, an €œin the box€ backplane solution ....etc

[:=Read Full Message Here=:]

IAP200T120 SixPac™
200A / 1200V 3-Phase Bridge IGBT Inverter

FEATURES INCLUDE
• Multi-Function Power Assembly
• Compact Size – 9” H X 17.60” W X 11.00” D
• DC Bus Voltages to 850VDC
• Snubber-less operation to 650VDC
• Switching frequencies to over 20kHz
• Protective circuitry with fail-safe opto-isolated fault annunciation,
including:
• Over current
• Over voltage
• Short circuit
• P.S. undervo ....etc

[:=Read Full Message Here=:]

To fulfill the requirements of traffic on Indian railways it has become necessary to run the vehicle with high speed and heavier loads. With the increase in speed and load of trains the tractive and braking forces on rails will also increase. Consequently, it has become important to investigate the safety of sub-structures of existing bridges. Hence the share of force resisted by individual sub-structural elements should be estimated more accurately than given by the present specifications which are based on a few field trials, and are not real ....etc

[:=Read Full Message Here=:]

Abstract— Computational Private Information Retrieval (cPIR) protocols allow a client to retrieve one bit from a database, without the server inferring any information about the queried bit. These protocols are too costly in practice because they invoke complex arithmetic operations for every bit of the database. In this paper, we present pCloud, a distributed system that constitutes the first attempt toward practical cPIR. Our approach assumes a disk-based architecture that retrieves one page with a single query. Using a striping technique, ....etc

[:=Read Full Message Here=:]

Authors:
N.S.Sakthivel Murugan
Dr Nirmal Kumar
Abstract:
Among the various power quality problems, the voltage sags, are attracting a large amount of attention of researchers from industry. DVR gives the solution to the above mentioned problem. The main function of DVR is to mitigate the voltage sag. It controls voltage applied to the load by injecting voltage of compensating amplitude, frequency and phase angle to the distribution line. The DVR is primarily responsible for restoring the quality of voltage delivered to the end user ....etc

[:=Read Full Message Here=:]

application of 1 phase 15 level inverter ....etc

[:=Read Full Message Here=:]

Abstract
This paper proposes a feed-forward control in a halfbridgeresonant dc page link inverter. The configuration of feed-forwardcontrol is based on synchronous sigma-delta modulation and the halfbridgeresonant dc page link inverter consists of two inductors, onecapacitor and two power switches. The simulation results show theproposed technique can reject non-ideal dc bus improving the totalharmonic distortion.
Keywords—Feed-forward control, Resonant dc page link inverter,Synchronous sigma-delta modulation.
I. INTRODUCTION[/b ....etc

[:=Read Full Message Here=:]

Single-phase half-bridge inverter


Operational Details

Consists of 2 choppers, 3-wire DC source
Transistors switched on and off alternately
Need to isolate the gate signal for Q1 (upper device)
Each provides opposite polarity of Vs/2 across the load

DC Supply Current
If the inverter is lossless, average power absorbed by the load equals the average power supplied by the dc source.
For an inductive load, the current is approximately sinusoidal and the fundamental component of the o ....etc

[:=Read Full Message Here=:]