PRESENTED By
SUDHAKAR AKKI


SPACE VECTOR MODULATION FOR TWO LEG INVERTERS
INTRODUCTION
• Semiconductor switches mainly determine the overall price of power converters.
• The main objective of this project is to prove 2leg inverters are the best option for low power applications for getting the good performance.
• Two leg inverter produces the square wave or quasi-square wave. but low power applications allow the two leg inverter output.
• In many industrial applications, it is often required to v ....etc

[:=Read Full Message Here=:]

Introduction

An inverter is an electrical device that converts direct current (DC) to alternating current (AC); the converted AC can be at any required voltage and frequency with the use of appropriate transformers, switching, and control circuits.
Static inverters have no moving parts and are used in a wide range of applications, from small switching power supplies in computers, to large electric utility high-voltage direct current applications that transport bulk power. Inverters are co ....etc

[:=Read Full Message Here=:]

Abstract

Inverter-based distributed generation has large potential to provide premium power quality.An adaptive grid-voltage sensorless interfacing scheme for inverter-based distributed generation (DG) units based on an
adaptive grid-interfacing model. First, a discrete-time model of a current controlled grid- connected inverter is presented.Then, an adaptive grid- interfacing model is designed with low computational demand to estimate, in real-time, the interfacing (impedance) parameters seen by the inverter and the grid v ....etc

[:=Read Full Message Here=:]

Microgrid Power Quality Enhancement Using a Three-Phase Four-Wire Grid-Interfacing Compensator


INTRODUCTION

MICROGRIDS can generally be viewed as a cluster of
microgenerators connected to the mains utility grid,
usually through some voltage-source-inverter (VSI)-based interfaces.
Concerning the interfacing of a microgrid to the utility
system, an important area of study is to investigate the impact
of unbalanced utility grid voltages and utility voltag ....etc

[:=Read Full Message Here=:]

1. Design and Implementation of Microcontroller based PWM technique for Sine wave Inverter
2. A novel DC-AC Single Phase Resonant Inverter using soft switching boost converter
3. Study on Dual-Loop Grid Current Control Scheme for Grid-Connected Inverter with an LCL-Filter
4. ZVS H-bridge Inverter using Soft Switching Boost Converter
5. A Novel Hybrid Modulation Scheme for an Isolated High-Frequency-Link Fuel Cell Inverter
6. ZVS Resonant DC-link Inverter using Soft Switching Boost Converter
7. Comparison of Z-Source Inverter and Traditi ....etc

[:=Read Full Message Here=:]

Abstract
In adjustable speed drive applications, the switching of the inverter semiconductors generates common
mode currents as well as harmful overvoltages on the motor terminals when long cables are used.
Consequently, bulky and expensive input and output filters must be used. This work aims at reducing
these disturbances from their origin by using a three-level neutral-point-clamped (NPC) inverter
controlled with a new pulse-width-modulation (PWM) strategy. Whereas previous common mode
noise-reducing strate ....etc

[:=Read Full Message Here=:]

Components for Grid Connected Solar Inverters in Residential Applications



Solar Inverter


Mosfet. Typically CoolMOS (page 113 of short form catalog; example: IXKH35N60C5)


IGBT. C3 series (page 92; example: IXGH48N60C3)
advantages compared to Mosfet: cost, conduction losses


Diode. HiPerDynFred (page 121 example: DPH30IS600H1), SONIC (page 124; example DHG20I600HA) or HiPerFRED (page 122; example DSEP29-06B)



IGBT (alternative). H-bridge (p ....etc

[:=Read Full Message Here=:]

name dinesh
mini projet report
Voltage source inverters (VSI) have been widely used in uninterruptible power supplies, unified power flow controllers or unified power quality conditioners, and distributed generation systems (DGS). VSIs are inherently efficient, compact, and economical devices used to control power flow and provide quality supply. VSIs can be classified as voltage-controlled VSIs (VCVSIs) and current-controlled VSIs (CCVSIs), depending on their control mechanism. In this paper, a detailed comparison of VCVSIs and CCVSIs for DG ....etc

[:=Read Full Message Here=:]

4.6 NUETRAL POINT CLAMPED (NPC) INVERTERS


Known as three-level inverters

Problem of 2-level inverter in high-power applications
High DC page link voltage requires series connection of devices  difficulty in dynamic voltage sharing during switching

Solved using NPC inverter or multilevel inverter

NPC inverter circuit


NPC (3)

DC page link capacitor split to create neutral point 0

Q11, Q14 : main devices (2-level inverter)

Q12, Q13 : auxiliary devices – clamp output potential to ne ....etc

[:=Read Full Message Here=:]

Abstract-
A pulse skipping control strategy is proposed to improve efficiency of grid-tied inverters at light loads. To maximize the efficiency of pulse skipping operation mode, three key parameters are identified and optimized based on a loss model, which is developed to find the maximal efficiency points using a three-dimensional search technique. A 200W prototype inverter was setup to verify the proposed control strategy. The experimental results show that the proposed pulse skipping control strategy greatly impr ....etc

[:=Read Full Message Here=:]