004/2016
Maximum : 100 marks
Time : 1 hour and 15 minutes

1.An ideal gas of mass and temperature T1 undergoes a reversible isothermal process from an initial pressure p1 to final pressure p2. The heat loss during the process is Q. The entropy change of the gas is :
(A)m
mR In (p2 / P1)
(B) mR In (p2 / p1)
(C ) mRT1
(D) zero 

2.Heat and work are :
(A)Path functions     (C ) Point functions
(B) Intensive properties (D) None of the above

3.If a closed system is undergoing an irreversible process, the entro ....etc

[:=Read Full Message Here=:]

RUNNING GEARING

ABSTRACT
The engine with no crank shaft is temporarily known by a name called Ëœrunning gearingâ„¢ engine. The technology of running gear can be applied to all formerly manufactured engines equipped with crank mechanism. This seminar deals with the arrangement and working of the engine and also its comparison with conventional type of engine. The comparison result shows that running gearing engine as much improved engine parameters than conventional crank engine. ....etc

[:=Read Full Message Here=:]

sir,
my name is Sandeep cs.I am doing diploma in mechanical engineering. I had read details about running gearing,but photos or images were not attached.so please give me more details with related photos or images.Because i want to take a seminar about this subject. ....etc

[:=Read Full Message Here=:]

RUNNING GEARING

ABSTRACT
The engine with no crank shaft is temporarily known by a name called Ëœrunning gearingâ„¢ engine. The technology of running gear can be applied to all formerly manufactured engines equipped with crank mechanism. This seminar deals with the arrangement and working of the engine and also its comparison with conventional type of engine. The comparison result shows that running gearing engine as much improved engine parameters than conventional crank engine. ....etc

[:=Read Full Message Here=:]

EXECUTIVE SUMMERY
INTRODUCTION
This thesis deals with questions concerning corporate capital structure. It examines show Della tecnica company will decide his capital structure in a real life context. It also examines if there is room for improvement when the company decide upon their capital structure. Finally, it presents our conclusion based on the case studies Modern corporate finance theory was born with the publication of Modigliani and Millerâ„¢s (M&M) theoretical model about capital structure in 1958. ....etc

[:=Read Full Message Here=:]

a tracking controller for the dynamic model of unicycle mobile robot by integrating a kinematic controller and a torque controller based on Fuzzy Logic Theory.and its application is to different navigation problems... ....etc

[:=Read Full Message Here=:]

RUNNING GEARING

ABSTRACT
The engine with no crank shaft is temporarily known by a name called Ëœrunning gearingâ„¢ engine. The technology of running gear can be applied to all formerly manufactured engines equipped with crank mechanism. This seminar deals with the arrangement and working of the engine and also its comparison with conventional type of engine. The comparison result shows that running gearing engine as much improved engine parameters than conventional crank engine. ....etc

[:=Read Full Message Here=:]

power generation using speed breaker ....etc

[:=Read Full Message Here=:]

please send me detail report on running gearing system as soon as possible. ....etc

[:=Read Full Message Here=:]

Hi my name is sandeep, can get some pdf regarding pedeling washing machine ....etc

[:=Read Full Message Here=:]

Design and Fabrication of GearBox
AIM: To design and fabricate a automobile gearbox

Objectives
To design a Helical gear box
Study of various gear manufacturing processes
Fabrication of gear box
Representation of Gearbox
Market Survey
Market research was done at following places regarding type and cost calculation of the Gearbox.

Sokhi heli-wom gears pvt.ltd in Ghaziabad
Hi-tech gears in Manesar
Junk market in Mayapuri

Gearbox
A transmission or gearbox provides speed and� ....etc

[:=Read Full Message Here=:]

By

VARUN K R
DEPARTMENT OF MECHANICAL ENGINEERING
CITY ENGINEERING COLLEGE



ABSTRACT

A differential is an important component which has a rack and a pinion, which allows the automobile to take turn by transmitting the power equally on both sides. Otherwise the tendency of the inner wheel taking a turn will have a slower rotation and the outer wheel should rotate faster. Differential actually helps the inner wheel to rotate at slow pace and the other wheel at a fa ....etc

[:=Read Full Message Here=:]

Purpose:

To identify aspects of a business’s performance to aid decision making
Quantitative process – may need to be supplemented by qualitative factors to get a complete picture
5 main areas:
1.Liquidity – the ability of the firm to pay its way
2.Investment/shareholders – information to enable decisions to be made on the extent of the risk and the earning potential of a business investment
3.Gearing – information on the relationship between the exposure of the business to loans as opposed to share capita ....etc

[:=Read Full Message Here=:]

Hello,
Myself Satya.s.v a final year mechanical engineering student from Mangalore.
I want some more pictures and information regarding the topic
RUNNING GEARING .
I know the principle of operation, Production cost, Advantages.
I dont know how exactly it works. so it will be very helpful if you send me some more pictures and information regarding the topic. ....etc

[:=Read Full Message Here=:]