difference between chopper fed drives and converter fed drives pdf ....etc

[:=Read Full Message Here=:]

CHAIN DRIVES IN LOW TORQUE DRIVES AND REDUCING PULSATIONS
INTRODUCTION TO DRIVES

Mechanical components used for power transmission.It may be belt, chain or gear depending on engine design parameters like - Distance between crankshaft and camshaft, engine maximum speed, engine-torque and engine construction cost.- Power transmission is done from one shaft to another shaft which may or may not rotate at same spe ....etc

[:=Read Full Message Here=:]

Current-Fed Resonant Full-Bridge Boost DC/AC/DC Converter
INDIRECT dc/ac/dc converters utilizing an isolation transformer
are widely used in different applications, such as
battery chargers and dischargers, uninterruptible power systems,
alternative energy systems, hybrid electric vehicles, and
medical X-ray imaging.
In the case of the applications where low input voltages have
to be converted to high output voltages, current-fed converters
are used, whereas in the case of higher power applications, fullbridge
boost conv ....etc

[:=Read Full Message Here=:]

Submitted By
R.PRASHANTH M.PRATHYUSH
K.PRAVEEN KUMAR
B.RADHIKA


ABSTRACT
Due to efficient control methods, DC motors are widely used motors to drive the loads in industry. Among the different control techniques for the DC motor speed control, armature voltage control method using Pulse Width Modulation (PWM) technique is the best one. We can realize the PWM control method u ....etc

[:=Read Full Message Here=:]

Difference between the chopper fed and converter fed drives ....etc

[:=Read Full Message Here=:]

Presented By
A.ARTHI JANNIE


HARMONIC ANALYSIS OF SEPARATELY EXCITED DC MOTOR DRIVES FED BY SINGLE PHASE CONTROLLED RECTIFIER AND PWM RECTIFIER
ABSTRACT
PWM rectifier is an ac to dc power converter which is implemented using power electronic semiconductor switches such as MOSFET, IGBT. Different from diode bridge rectifiers, PWM rectifiers achieve bidirectional power flows,which can be extensively used in battery charger, UPS system, regulated dc voltage source. SCR converters provide low power fac ....etc

[:=Read Full Message Here=:]

2.1 INTRODUCTION
Direct-current motors are extensively used in variable-speed drives and positioncontrol
systems where good dynamic response and steady-state performance are
required. Examples are in robotic drives, printers, machine tools, process rolling mills,
paper and textile industries, and many others. Control of a dc motor, especially of the
separately excited type, is very straightforward, mainly because of the incorporation of
the commutator within the motor. The commutator brush allows the motor-devel ....etc

[:=Read Full Message Here=:]

Implementation of Full-Bridge Current-Fed Resonant Boost Converter using PIC microcontroller
ABSTRACT
This paper presents a current-fed full-bridge boost DC-ACDCconverter with transformer isolation operating withoutswitching power dissipation. The output voltage is regulatedby dc-ac converter whose frequency changes with a constantturn-off time of transistors. The proposed converter is devoidof parasitic oscillations, as all of the parasitic capacitancesand inductances are included in a resonant tank circuit. Themain advantage of such ....etc

[:=Read Full Message Here=:]

ECE 8830 - Electric Drives
Introduction
Current-fed inverters requires a “stiff” constant current source input - thus are sometimes referred to as CSI (current source inverters or current stiff inverters).

A large inductance can be used to change a variable voltage input to a variable current input.

VSI-inverters and CSI-inverters are dual to each other.
Introduction (cont’d)
Power semiconductor devices used in CSI inverters must be able to withstand large reverse voltag ....etc

[:=Read Full Message Here=:]

DOUBLY FED INDUCTION MACHINE

INTRODUCTION
ELECTRICAL MACHINES
Based on the supply, 2 types-AC machine & DC machine
AC machines are of different types
1. Induction machine
2. Synchronous machine etc.

INDUCTION MACHINE
Induction machines are of different types and one of the type in particular are Singly Fed and Doubly Fed.
SINGLY FED INDUCTION MACHINE
1. Only ONE winding active in ENERGY conversion Process
2. Can have speed around Synchronous Speed.

DOUBLY FED INDUCTION MACHINE
T ....etc

[:=Read Full Message Here=:]