The recent increase in the use of hard, high strength and temperature resistant materials in engineering necessitated the development of newer machining techniques. Conventional machining or finishing methods are not readily applicable to the new materials like hastalloy, nitralloy, waspalloy, nimonics, carbides, ceramics etc.


Conventional machining processes when applied to these newer materials:
1. Are uneconomical,
2. Produce poor degree of surface finish and accuracy,
3. Produce some stress,
4. Highly insufficient.

Newer machin ....etc

[:=Read Full Message Here=:]

The VRB-ESS is a device that is capable of storing energy in multi megawatt ranges for durations that range from hours to days, from any available input source such as Grid, Renewable resources or even from a diesel generator. The stored energy can then be provided back into the Grid or supplied to a load as required & directed. It is uniquely capable of being charged as quickly as it was discharged. This seminar presents the various features & applications of the VRB and discusses its future in the coming years.

The vanadium redox flow b ....etc

[:=Read Full Message Here=:]

Introduction
Direct generation of measurable voltages and currents is possible when a fluids flows over a variety of solids even at the modest speed of a few meters per second. In case of gases underlying mechanism is an interesting interplay of Bernoulli's principle and the See beck effect: Pressure differences along streamlines give rise to temperature differences across the sample; these in turn produce the measured voltage. The electrical signal is quadratically dependent on the Mach number M and proportional to the Seebeck coefficient of ....etc

[:=Read Full Message Here=:]

Usefulness of DC Power Flow for Active Power Flow Analysis



I. INTRODUCTION
STATIC power system analysis has always been
performed using full power flow. It is one of the
fundamental tools for power system analysis and is used in
the operational as well as planning stages. Vertically
integrated companies have used it to control their systems, as
well as to plan the optimal economic operation of generation
resources, either by means of optimal power flo ....etc

[:=Read Full Message Here=:]

An adequate blood flow supply is necessary for all organs of the body. Analysis of the blood flow finds its importance in the diagnoses of diseases. There are many techniques for analyzing the blood flow. These techniques are not affordable by the poor people because of their high expense. So we have implemented a technique called Zoom-FFT. This technique is simple and affordable to detect the blood clots and other diseases.

Human with his potential tries to get whichever is unexplored, explored, and till now we are managing and succeeding u ....etc

[:=Read Full Message Here=:]

The flow of granular materials is an important phenomena in a number of industrial processes, such as the transport of food-grains, ores, catalysts, powders, etc; as well as in many natural processes such as mud slides and avalanches. However, there is no single constitutive equation which can reproduce the diverse behavior observed in granular materials. The flow of granular materials is generally classified into three distinct flow regimes, where both continuum models and kinetic theory based models are used to predict the flow behavior. Expe ....etc

[:=Read Full Message Here=:]

Thermophoresis is a phenomenon of the movement of small particles in a gas with a temperature gradient towards the cooler region of the gas. Small particles, such as dust, when suspended in a non-isothermal gas, experience a force in the direction opposite to the temperature gradient. This force, known as the thermophoretic force plays an important role in the mass transfer mechanism of several devices involving sub-micron and micron sized particles and a large thermal gradient, and it is often cited as an important one influence the efficiency ....etc

[:=Read Full Message Here=:]

Implementation Of Zoom FFT in Ultrasonic Blood Flow Analysis

Introduction
An adequate blood flow supply is necessary for all organs of the body. Analysis of the blood flow finds its importance in the diagnoses of diseases. There are many techniques for analyzing the blood flow. These techniques are not affordable by the poor people because of their high expense. So we have implemented a technique called Zoom-FFT. This technique is simple and affordable to detect the blood clots and other diseases.

Human with his potential tries to get wh ....etc

[:=Read Full Message Here=:]

Incorporation of FACTS Controllers in Newton Raphson Load Flow for Power Flow Operation, Control and Planning: A Comprehensive Survey
Abstract-
This paper presents a comprehensive survey ofincorporation of FACTS controller such as SVC, TCSC,SSSC, STATCOM, UPFC, and IPFC devices in Newton-Raphson load flow (NRFL) for power flow control. Thepurpose of this paper is to present a comprehensive surveyof various FACTS controllers are incorporated in loadflow analysis for different point of view such as optimalpower flow control, planning an ....etc

[:=Read Full Message Here=:]

The VRB-ESS is a device that is capable of storing
energy in multi megawatt ranges for durations that range from hours to
days, from any available input source such as Grid, Renewable resources
or even from a diesel generator. The stored energy can then be provided
back into the Grid or supplied to a load as required & directed. It
is uniquely capable of being charged as quickly as it was discharged.
This seminar presents the various features & applications of the
VRB and discusses its future in the coming years.The
vanadium redox flo ....etc

[:=Read Full Message Here=:]