HISTORY


The Oil Mist principle was developed by a bearing manufacturer in Europe during the 1930s. The problem that nurtured this development was the inability to satisfactorily lubricate high-speed spindle bearings on grinders and similar equipment. In 1948, oil mist was brought to the United States in the steel industry. Since'the late 1950% oil mist has been servicing rotating equipment 'in the refining industry. The first use of oil mist in the petrochemical indust ....etc

[:=Read Full Message Here=:]

Abstract:
We developed an electrostatic micro power generator for low frequency energy harvesting applications. This micro power generator consists of a new vibration structure and new electret electrode. The advantage of this micro power generator is the high power generation structure of both the controlled gap
between electrodes and long-range moving at low frequency. This generator shows 40+W of power output at very low frequency vibration (2Hz, 0.4G).

INTRODUCTION:

Nowada ....etc

[:=Read Full Message Here=:]

1.defination.
2.types of electro static generator.
3.advantages.
4.disadvantages.
5.applications.
6.how it differ from other type of generators? ....etc

[:=Read Full Message Here=:]

ABSTRACT
Metal cutting fluids changes the performance of machining operations because of their lubrication, cooling, and chip flushing functions. Typically, in the machining of hardened steel materials, no cutting fluid is applied in the interest of low cutting forces and low environmental impacts. Minimum quantity lubrication (MQL) presents itself as a viable alternative for hard machining with respect to tool wear, heat dissertation, and machined surface quality. This study compares the mechanical performance of mini ....etc

[:=Read Full Message Here=:]

[email protected] ....etc

[:=Read Full Message Here=:]

DEVELOPMENT OF ELECTROSTATIC SOLID LUBRICATION SYSTEM FOR IMPROVEMENT IN MACHINING PROCESS PERFOMANCE


Submitted by
JAYAKRISHNAN R




Abstract

Liquid lubricants have traditionally been used to control the high heat generation in machining; however, the use of cutting fluid has become more problematic in terms of both employee health and environmental pollution. Minimization or possible elimination of cutting fluids substituting their functions by some other means is emer ....etc

[:=Read Full Message Here=:]

An electrostatic generator is a mechanical device that produces continuous current . The knowledge of static electricity dates back to the earliest civilizations, but for millennia it remained merely an interesting and mystifying phenomenon. The development of electrostatic machines did not begin in earnest until the 18th Century. Electrostatic generators operate by using manual (or other) power to transform mechanical work into electric energy. Electrostatic generators develop electrostatic charges of opposite sign rendered to divided conducto ....etc

[:=Read Full Message Here=:]

Combined aerodynamic and electrostatic atomization of dielectric
liquid jets




Abstract

The electrical and atomization performance of a
plane–plane charge injection atomizer using a dielectric
liquid, and operating at pump pressures ranging from 15 to
35 bar corresponding to injection velocities of up to 50 m/s,
is explored via low current electrical measurements, spray
imaging and phase Doppler anemometry. The work is
aimed at understanding the contribution of electrostatic
charging relevant t ....etc

[:=Read Full Message Here=:]

can any one give me a report on Electrostatic Generator ....etc

[:=Read Full Message Here=:]

sir, iam an engineering student for my project work i need complete information regarding ELECTRO STATIC MOTOR, as ppt and documentation with photos and video explaining working plz send to my mail [email protected] ....etc

[:=Read Full Message Here=:]