Micro-electro Mechanical Systems (MEMS)

Introduction
The satellite industry could experience its biggest revolution since it joined the ranks of commerce, thanks to some of the smallest machines in existence. Researchers are performing experiments designed to convince the aerospace industry that microelectromechanical systems (MEMS) could open the door to low-cost, high-reliability, mass-produced satellites.MEMS combine conventional semiconductor electronics with beams, gears, levers, switches, accelerometers, diaphragms, microfluidic thrus ....etc

[:=Read Full Message Here=:]

Micro electro-mechanical system ....etc

[:=Read Full Message Here=:]

Electro Dynamic Tether

Tether is a word, which is not heard often. The word meaning of tether is 'a rope or chain to fasten an animal so that it can graze within a certain limited area'. We can see animals like cows and goats 'tethered' to trees and posts.

In space also tethers have an application similar to their word meaning. But instead of animals, there are spacecrafts and satellites in space. A tether if connected between two spacecrafts (one having smaller orbital altitude and the other at a larger orbital altitude) momentum exchang ....etc

[:=Read Full Message Here=:]

ABSTRACT
Brake performance can be divided into two distinct classes:1) Base brake performance2) Controlled brake performance.A base brake event can be described as a normal or typical stop in which the driver maintains the vehicle in its intended direction at a controlled deceleration level that does not closely approach wheel lock. All other braking events where additional intervention may be necessary, such as wheel brake pressure control to prevent lock-up, application of a wheel brake to transfer torque across an open differential, or appl ....etc

[:=Read Full Message Here=:]

The unconventional method of several specific advantages over conventional methods of machining and these promise formidable tasks to be undertaken and set a new recording in the manufacturing technology. EDM is one such machining process, which has been immense help to the manufacturing process engineers to produce intricate shapes on any conducting metal and alloy irrespective of its hardness and toughness.


CLASSIFICATION

1. Contact initiated discharge
2. Spark initiated discharge
3. Electrolytic discharge

ADVANTAGES

1. The pr ....etc

[:=Read Full Message Here=:]

Micro-electro Mechanical Systems

Micro-electromechanical systems (MEMS) is a technology that combines computers with tiny mechanical devices such as sensors, valves, gears, mirrors, and actuators embedded in semiconductor chips.

Overview
MEMS are already used as accelerometers in automobile air-bags. They've replaced a less reliable device at lower cost and show promise of being able to inflate a bag not only on the basis of sensed deceleration but also on the basis of the size of the person th ....etc

[:=Read Full Message Here=:]

Electro Static Precipitator


Energy conversion and equipment are closely related due to industrialisation and increase in population our environment is polluted vigorously. Many of the industries and fossil fuel power plant emit CO2, CO, particulate matter, heat and other poisonous gases to the atmosphere. Resulting many problems like global warming, health hazards, environmental degrading etc.

We need clean air, atmosphere and surrounding for good health and better quality of living. The energy needs are increasing due to industrial adv ....etc

[:=Read Full Message Here=:]

Definition
Micro-electromechanical systems (MEMS) is a technology that combines computers with tiny mechanical devices such as sensors, valves, gears, mirrors, and actuators embedded in semiconductor chips.




Overview
MEMS are already used as accelerometers in automobile air-bags. They've replaced a less reliable device at lower cost and show promise of being able to inflate a bag not only on the basis of sensed deceleration but also on the basis of the size of the person they are protecting. Basically, a MEMS device contains micro-cir ....etc

[:=Read Full Message Here=:]

Manufacturing of the intricate machines has taken a new dimension with the introduction of the innovative process of chemical, electrical and mechanical methods. Electrochemical machining (ECM) is a groundbreaking technology, for the development of complicated machines. ....etc

[:=Read Full Message Here=:]

Electro Discharge Machining


The unconventional method of several specific advantages over conventional methods of machining and these promise formidable tasks to be undertaken and set a new recording in the manufacturing technology. EDM is one such machining process, which has been immense help to the manufacturing process engineers to produce intricate shapes on any conducting metal and alloy irrespective of its hardness and toughness.


CLASSIFICATION

1. Contact initiated discharge
2. Spark initiated discharge
3. Electrolytic dis ....etc

[:=Read Full Message Here=:]