I want the project report with code on Project on fingerprint age determination using matlab ....etc

[:=Read Full Message Here=:]

EQUIVALENT CIURCUIT AND PRE-DETERMINATION OF PERFORMANCE CHARACTERISTICS OF 1Ф INDUCTION MOTOR
AIM:
To draw the performance characteristics of a single phase induction motor by conducting the no-load and blocked rotor test.
FUSE RATING:
125% of 7.6A=10A
THEORY:
A 1-Ф induction motor consists of stator,rotor and other associated parts.In the rotor of a single phase winding is provided.The windings of a 1- Ф winding(provided) are displaced in space by 120º.A single phase current is fed t ....etc

[:=Read Full Message Here=:]

From transmission error measurement to Pulley-Belt slip determination in serpentine belt drives: influence
Abstract —
Serpentine belt drives are often used in front
end accessory drive of automotive engine. The accessories
resistant torques are getting higher within new technological
innovations as stater-alternator, and belt transmissions
are always asked for higher capacity. Two kind of tensioners
are used to maintain minimum tension that insure power
transmission and minimize slip: dry friction or hydraulic
tensioners. An ....etc

[:=Read Full Message Here=:]

Abstract
In this seminar practical implementation of application of real-time operating system QNX for automatic dynamic properties of resistance furnaces identification aims is presented. Application was also used to test some properties of MBS signals in identification of electrothermic objects ....etc

[:=Read Full Message Here=:]

Determination of Intracranial Tumor Volumes in a Rodent Brain Using Magnetic Resonance Imaging
Abstract
The measurement of tumor volumes is a practical andobjective method of assessing the efficacy of a therapeutic agent.However, the relative accuracy of different methods of assessingtumor volume has been unclear. Using 1-weighted, gadoliniumenhancedmagnetic resonance Imaging ( 1-MRI), Evans Blue infusionand histology we measured intracranial tumor volumes ina rodent brain tumor model (RT2) at days 10, 16 and 18 after implantat ....etc

[:=Read Full Message Here=:]

Determination of Optimum Process Parameters during turning of AISI 304



Introduction and literature survey

In machining process, Surface finish is one of the most significant technical requirements of the customer. A reasonably good surface finish is desired to improve the tribological properties, fatigue strength, corrosion resistance and aesthetic appeal of the product. Nowadays, manufacturing industries specially concerned to dimensional accuracy and surface finish. In order to obtain optimal cutting pa ....etc

[:=Read Full Message Here=:]

Object Tracking and Velocity Determination using TMS320C6416T DSK

Begutachter: Univ.Prof. Dr. techn. Bernhard Rinner
Betreuer: Univ.Ass. Dipl.Ing. Wolfgang Schriebl
Institute of Networked and Embedded Systems
Pervasive Computing

Abstract
This project deals with the tracking and following of single object in a sequence of frames
and the velocity of the object is determined. Algorithms are developed for improving
the image quality, segmentation, feature extraction and for deterring the velocity. The
d ....etc

[:=Read Full Message Here=:]

PRESENTED BY”
Ramasamy V , Senthil S and Prasath M2

ABSTRACT
There has been great concern about the health risks associated with the exposure due to the natural radioactivity present in coastal sediments all over the world. In this context, 35 intertidal sediment samples were collected from north east coast of Tamilnadu, India, in order to evaluate their natural radioactivity. The activity concentrations of natural radionuclides such as 238U, 232Th and 40K in sediment samples were determined by gamma ray spectrometer. The meas ....etc

[:=Read Full Message Here=:]

ABSTRACT
This project deals with the tracking and following of single object in a sequence of frames and its velocity determination. Algorithms are developed for improving the image quality, segmentation, feature extraction and for determining the velocity.
Segmentation is performed to detect the object after reducing the noise from that scene. The object is tracked by plotting a rectangular bounding box around it in each frame. The velocity of the object is determined by calculating the distance that the object mov ....etc

[:=Read Full Message Here=:]

please do send me the seminar paper on Finite element analysis of robotic arm for optimal work space determination...
please do send me the seminar paper on finite element analysis of robotic arm for optimal work space determinaiton ....etc

[:=Read Full Message Here=:]