Abstract
The ability to accurately track hand movement provides new opportunities for human computer interaction (HCI). Many of todayâ„¢s commercial hand tracking devices based on gloves can be cumbersome and expensive. An approach that avoids these problems is to use computer vision to capture hand motion. In this paper, we present a complete real-time hand tracking and 3-D modeling system based on a single camera. In our system, we extract feature points from a video stream of a hand to control a virtual hand model with 2-D global motio ....etc

[:=Read Full Message Here=:]

Generalised synchronisation in laser devices
with electro-optical feedback
partial and global generalised synchronisation is presented in this article in the case of bi-directionally coupled non-identical chaotic systems with multiple time delays. First a generalized approach is taken and then it is applied to multiple time-delay laser systems with electro-optical feedback. the effect of signal sampling on the signatures of time delays is also studied.
many disciplines of science deals with the synchronisation of systems of coupled ....etc

[:=Read Full Message Here=:]

Abstract
The ability to accurately track hand movement provides new opportunities for human computer interaction (HCI). Many of todayâ„¢s commercial hand tracking devices based on gloves can be cumbersome and expensive. An approach that avoids these problems is to use computer vision to capture hand motion. In this paper, we present a complete real-time hand tracking and 3-D modeling system based on a single camera. In our system, we extract feature points from a video stream of a hand to control a virtual hand model with 2-D global moti ....etc

[:=Read Full Message Here=:]

Author: Dr. Stephen Williams

Abstract

Here, the students learn how brushless DC motors have made personal electric vehicles (PEVs) possible, and calculate how much using a PEV instead of an automobile for some of their daily driving can impact their production of carbon dioxide, based on United States driving patterns. In the laboratory, students build a brushless DC motor using three different control methods, based on a reed switch, a Hall effect sensor, and optoelectronics, respectively. In the process, students learn about ....etc

[:=Read Full Message Here=:]

MAGNETIC LEVITATION SYSTEM
plant consists of an electromagnet, an optic position sensor, a
ferromagnetic sphere and a power interface.
Due to the spherical shape the measurement is nonlinear and needs
to be electronically or digitally linearised.

Velocity estimation
For fast nonlinear and unstable dynamical systems, such as magnetic
levitation, high quality of control is essential.
The ball velocity measurement is a dicult task.
Measurements of position and current is used for the velocity
estimatio ....etc

[:=Read Full Message Here=:]

Feedback linearization method for improvement of power systems transient stability
MINI PROJECT


ABSTRACT
Feedback linearization is a common approach used in controlling nonlinear systems. The approach involves coming up with a transformation of the nonlinear system into an equivalent linear system through a change of variables and a suitable control input. It is done by algebraically transforming non-linear system dynamics into a linear one so that linear control techniques can be applied. The canonical form and the general form ....etc

[:=Read Full Message Here=:]

SUBMITTED BY:
ANKUSH GOYAL


Introduction
A linear feedback shift register (LFSR) is a shift register whose input bit is a linear function of its previous state. The only linear function of single bits is xor, thus it is a shift register whose input bit is driven by the exclusive-or (xor) of some bits of the overall shift register value.
The initial value of the LFSR is called the seed, and because the operation of the register is deterministic, the stream of values produced by the register is completely dete ....etc

[:=Read Full Message Here=:]

Abstract”
A major disadvantage of applying sliding mode control to dc/dc converters is that the steady-state switching frequency is affected by line and load variations. This is undesirable as it complicates the design of the input and output filters. To reduce switching frequency deviation in the events of line and load variations, an adaptive feedforward control scheme that varies the hysteresis band according to the change of line input voltage and an adaptive feedback control scheme that varies the control parameter (i.e., sliding c ....etc

[:=Read Full Message Here=:]

1. (a). The return of a portion of the output of a process or system to the input,especially when used to maintain performance or to control a system or process.

(b). The portion of the output so returned.

(c). Sound created when a transducer such as a microphone or electric guitar picks up sound from a speaker connected to an amplifier and regenerates it back through the amplifier.

2. The return of information about the result of a process or activity; an evaluative response: asked the students for feedback on the new curriculum.

3 ....etc

[:=Read Full Message Here=:]

Abstract
Developing effective mechanisms for feedback collection in learning environments is particularly important at the frontiers of new knowledge .Valuing and asking for feedback has recognized benefits for both staff and students. For Staff to provide information for course design to further develop teaching skills as well as to provide better service to the students. For Students to feel valued and 'listened' to have ownership in their own learning to develop reflective thinking to be better informed in selecting a course/module . The o ....etc

[:=Read Full Message Here=:]