am interested in above given project and u can mail details to me at [email protected] ....etc

[:=Read Full Message Here=:]

In manual flush systems, the userpresses a button, which opens aflush valve allowing mains-pressurewater to flow into the bowl, orsometimes the user presses directlya flush lever (a handle connected toa flushometer). The valve contains apneumatic mechanism that closes itafter a preset time.Today, manual flush system hasbeen replaced with a sensor-operatedsystem that automatically flushes thefixture when the user departs.The microcontroller-based automaticflush system presented here usesan infrared sensor to detect a user approac ....etc

[:=Read Full Message Here=:]

An automotive cooling system must perform several functions
1. Remove excess from the engine
2. Maintain a consist engine temperature
3. Help a cold engine warm-up quickly
4. Provide a means of warming the passenger compartment

Automotive cooling systems operate around 180-212 degree F
Engine coolant is used to remove heat from the cylinder to the radiator where in is then dissipated.
Engine coolant mixture should be approximately a 50/50 mixture of coolant and water.

Water soluble oil is used as a lubricant in all coolants sy ....etc

[:=Read Full Message Here=:]

ABSTRACT
Electronic equipment has made its way in to practically every aspect of modern life, from toys to high power computer. Electronic components depend on the passage of electric current and they become potential sites for excessive heating since the current flow through a resistance is accompanied by heat generation. Continued miniaturization of electronic system has resulted in a dramatic increase in the heat generated per unit volume. Unless properly designed and controlled; high rates heat generation result in high operating temperat ....etc

[:=Read Full Message Here=:]

seminars report on this topic ....etc

[:=Read Full Message Here=:]

PRESENTED BY:-
DIBYA SUNDAR SAHOO


INTRODUCTION
The name “INTELLIGENT COOLING SYSTEM” represents the improved function of a cooling system. The name is so given because in this system a sensor senses the cylinder temperature & controls the opening & closing of water passage in piston-cylinder arrangement.The basic principle behind this is to control flow rate of coolant by regulating the valve by implementing FUZZY LOGIC.
CONVENTIONAL COOLING SYSTEM
WATER COOLING SYSTEM:-
In this sys ....etc

[:=Read Full Message Here=:]

hi, i'm student from 3rd year mechanical engg.
i need information about my seminar topic.
the topic is cooling system in i.c.engine ,design approach
hoping for positive reply. ....etc

[:=Read Full Message Here=:]

ABSTRACT

In the present paper, efforts have been made to highlight the concept of an INTELLIGENT COOLING SYSTEM. The basic principle behind this is to control the flow rate of coolant by regulating the valve by implementing FUZZY LOGIC.
In conventional process the flow rate is constant over the entire engine jacket. Which induces thermal stresses & reduction in efficiency.
The INTELLIGENT COOLING SYSTEM i.e implementation of fuzzy logic will overcome the above stated drawbacks in any crisp situation. ....etc

[:=Read Full Message Here=:]

NANOFLUIDS FOR HIGH PERFORMANCE COOLING SYSTEM
ABSTRACT
Downscaling or miniaturization has been a recent major trend in modern science and technology. Engineers now fabricate microscale devices such as micro channel heat exchangers, and micro pumps that are the size of dust specks. Further major advances would be obtained if the coolant flowing in the micro channels were to contain nanoscale particles to enhance heat transfer. Nanofluid technology will thus be an emerging and exciting technology of the 21stcentury. This paper gives a brief ....etc

[:=Read Full Message Here=:]

plz give me some information about automated temparature cooling system used in foundaries ....etc

[:=Read Full Message Here=:]