1. INTRODUCTION
Programmable logic controllers (PLCs) are members of the computer family capable of storing instructions to control functions such as sequencing, timing, and counting, which control a machine or a process. The PLC is composed of two basic sections, the Central Processing Unit (CPU) and the Input/Output (I/O) interface system. The PLC measures input signals coming from a machine and through the internal program provides output or control back to the machine.
Ladder logic is the programming language used t ....etc

[:=Read Full Message Here=:]

hello sir
i want to make a PLC BASED BOTTLE FILLING STATION MODEL KIT for my major project, so please help me by sending its project report, catalog, or any information regarding this topic.
hoping for an early reply
parveen
[email protected] ....etc

[:=Read Full Message Here=:]

i want some idea about the pick and place sequence operated by plc and pneumatics and wht are the requirement equipments for that. ....etc

[:=Read Full Message Here=:]

abstract on automation ....etc

[:=Read Full Message Here=:]

To get report with source code for specific plc based project topic please browse through this page http://studentbank.in/topic-electronics-electrical-instrumentation-applied-electronics-project-ideas






A. PC based cordless pick and place Robot
B. PC based room cooling system
C. PC based Stepper motor speed control system
D. PC based Electrical appliances control System
E. PC to PC data transmission through Infrared Rays
F. PC Based 4-Axis stepper motor tracking System
G. PC based Auto feed ....etc

[:=Read Full Message Here=:]

ABSTRACT
A specially designed producer gas carburetor is comprehensively analyzed for its mixing performance and response with a CFD modeling. The model is made up of a mixer chamber that has the essential orifices for air and fuel (producer gas) inlets to generate stable stoichiometric mixture at near to ambient conditions using the induction of the engine as the driving pressure differential for the flow, and tested for a case of engine of 25 kWe capacity.The CFD simulations are carried out followed with experimental studies to valid ....etc

[:=Read Full Message Here=:]

Electronic Assisted hydraulic breaking system
Fabrication of Pneumatic Auto feed Bottle washing Machine
Fabrication of Abrasive Jet Machine
Combined hydraulic and disk break system
Automatic paint spraying Equipment
Automatic pneumatic vice and jack
Fabrication of Pneumatic automatic Vegetable Cutting Machine
Fabrication of Pneumatic punch die
Automatic pneumatic welding machine
Fabrication of three axis pneumatic Modern Trailer
Fabrication of hydro coupling mechanism
Automatic pneumatic Spring End Grinding Machine
Fabrication of au ....etc

[:=Read Full Message Here=:]

Power line communication (PLC), also called Mains Communication, Power Line Telecoms (PLT), Powerband or Power Line Networking (PLN), is a term describing several different systems for using power distribution wires for simultaneous distribution of data. The carrier can communicate voice and data by superimposing an analog signal over the standard 50 or 60 Hz alternating current (AC). It includes Broadband over Power Lines (BPL) with data rates sometimes above 1 Mbit/s and Narrowband over Power Lines with much lower data rates. Traditionally el ....etc

[:=Read Full Message Here=:]

GREEN ELECTRICITY FROM BIOMASS FUELLED PRODUCER GAS ENGINE
ABSTRACT: In the recent times issues like the Green House Gas (GHG) emission reduction and carbon-trading through Clean Development Mechanism (CDM) have gained large prominence as a part of climate change. Biomass gasification is one such technology which is environmentally benign and holds large promise for the future. These technol ogies are currently being utilized for power generation applications at a number of industrial sites in India and abroad. In India there are nearly 4 MWe ....etc

[:=Read Full Message Here=:]

Biomass Gasification for Production of Producer gas using Wood
chip, Saw dust, Trash papers and Other Agricultural Wastes
Abstract—
Renewable energy such as solar, wind, and bio-fuels can play a key role in creating a clean,reliable energy future. The benefits are many and varied, including a cleaner environment. Electricity isoften produced by burning fossil fuels such as oil, coal, and natural gas besides hydropower. Thecombustion of these fuels releases a variety of pollutants into the atmosphere, such as carbon dioxide(CO2), sul ....etc

[:=Read Full Message Here=:]