PROJECT REPORT ON
FULLYAUTOMATED BURNER MANAGEMENT SYSTEM USING PLC

FACT (THE FERTILIZERS AND CHEMICALS TRAVANCORE LIMITED) was set up in 1944 on the banks of river Periyar at Udyogamandal, Ernakulam. In decades that followed, multistage expansion programming was undertaken bringing in the latest technology of the days, which were quickly mastered and I successfully implemented.
In 1962, FACT came under the government of India. A second fertilizers production unit called Cochin Division (CD) at Ambalamughal and two ....etc

[:=Read Full Message Here=:]

Concept of Cement

The word ËœCEMENTâ„¢ may be defined as a substance, which can join two or more pieces of same other substance together to form a unit mass. Cement is a fine powder which when mixed with water and allow to set and harder can join different components together to give a strong structure mechanically. Thus cement can be used as founding material for bricks or for founding solid particles of different sizes (rubble masonry ) to form a monolish.
It was about 150 years ago or so that ËœCem ....etc

[:=Read Full Message Here=:]

ABSTRACT

The concept of insulating cooled heat engine components such as gas turbine blades and diesel engine valves from hot working fluids with a ceramic thermal barrier coating is by no means new. A practical system, however, has only been identified in the past few years. Thermal barrier coating (TBC) are applied to metallic components to reduce metal temperature, reduce life cycle cost, increase the environmental resistance and in some cases reduce noxious exhaust emissions. The selection of TBC involves many consider ....etc

[:=Read Full Message Here=:]

Hi! I would like to request an English operating manual for kiturami room CTR-5500 ASAP.

Thanks,
Grace ....etc

[:=Read Full Message Here=:]

PROJECT REPORT ON
FULLYAUTOMATED BURNER MANAGEMENT SYSTEM USING PLC

FACT (THE FERTILIZERS AND CHEMICALS TRAVANCORE LIMITED) was set up in 1944 on the banks of river Periyar at Udyogamandal, Ernakulam. In decades that followed, multistage expansion programming was undertaken bringing in the latest technology of the days, which were quickly mastered and I successfully implemented.
In 1962, FACT came under the government of India. A second fertilizers production unit called Cochin Division (CD) at Ambalamughal and two ....etc

[:=Read Full Message Here=:]

1. MOTORISED OBJECT LIFTING JACK
2. KEY CONTROLLED- FORK LIFTER:
3. MATERIAL HANDLING (X, Y, Z MOTION CONTROL):
4. STEPPER MOTOR CONTROL WITH SELECTED STEPS FOR CONVEYOR BELT:
5. OBJECT REJECTION & COUNTING MACHINE:
6. ROBOTIC ARM WITH GRIPPER:
7. PNEUMATIC/HYDRAULIC ROBO ARM:
8. PNEUMATIC/HYDRAULIC CRANE:
9. PNEUMATIC/HYDRAULIC JACK:
10. ROBOTIC CRANE :
11. ROBOTIC TROLLEY FOR MATERIAL HANDLING:
12. AUTOMATIC STAMPING AND SORTING MACHINE FOR POST CARD:
13. WIND MILL:
14. SOLAR SUN SEEKER:
15. THERMAL POWER PLANT USING STEAM:
16. ....etc

[:=Read Full Message Here=:]

An Optimized Low Heat Rejection Engine for Automotive Use - An Inceptive Study
GOVERNMENT OF KERALA
DEPARTMENT OF TECHNICAL EDUCATION

Govt. Rajiv Gandhi Institute of Technology


ABSTRACT
An unconventional low heat rejection (LHR) engine design is described. Previous research efforts into LHR concepts, including high temperature materials and tribology, are reviewed. The continued reliance on conventional compression ignition designs is identified as a significant roadblo ....etc

[:=Read Full Message Here=:]

8051 microcontroler burner kit project report ....etc

[:=Read Full Message Here=:]

An Optimized Low Heat Rejection Engine for Automotive Use - An Inceptive Study
GOVERNMENT OF KERALA
DEPARTMENT OF TECHNICAL EDUCATION

Govt. Rajiv Gandhi Institute of Technology


ABSTRACT
An unconventional low heat rejection (LHR) engine design is described. Previous research efforts into LHR concepts, including high temperature materials and tribology, are reviewed. The continued reliance on conventional compression ignition designs is identified as a significant roadblo ....etc

[:=Read Full Message Here=:]

I need the animation of Burner Management system for training ....etc

[:=Read Full Message Here=:]

please send the doccument and ppt's about the seminar topic Blue ray ,and also send some latest seminar topics for final semester electronics & communication seminar to my id [email protected] you do the needful.

thank you. ....etc

[:=Read Full Message Here=:]

ABSTRACT
The green engine is one of the most interesting discoveries of the new millennium. It has got some unique features that were used for the first time in the making of engines. This engine is a piston less one with features like sequential variable compression ratio, direct air intake, direct fuel injection, multi-fuel usage etc. The efficiency of this engine is high when compared to the contemporary engines and also the exhaust emissions are near zero. The significance of the engine lies in the efficiency when the ....etc

[:=Read Full Message Here=:]

The factory contains an 'acid regeneration plant', where Spend Acid is regenerated to Hydro Chloric Acid, which is the desired output of the plant. For this regeneration of the acid a burner control system is required. The temperature range of the burner is between 9000c -12000c.The reactants required for regeneration plant are Iron Chloride and Spend Acid vapourises and breaks down into H2O and Acid. Iron Chloride also breaks down into Iron Oxide and Chlorine.

The Chlorine reacts with the water to produce Hydro Chloric Acid (HCL). Here the ....etc

[:=Read Full Message Here=:]

TURBOFAN ENGINES

INTRODUCTION

Jet Propulsion is the thrust imparting forward motion to an object, as a reaction to the rearward expulsion of a high-velocity liquid or gaseous stream.
A simple example of jet propulsion is the motion of an inflated balloon when the air is suddenly discharged. While the opening is held closed, the air pressure within the balloon is equal in all directions; when the stem is released, the internal pressure is less at the open end than at the opposite end, causing the balloo ....etc

[:=Read Full Message Here=:]

The factory contains an 'acid regeneration plant', where Spend Acid is regenerated to Hydro Chloric Acid, which is the desired output of the plant. For this regeneration of the acid a burner control system is required. The temperature range of the burner is between 9000c -12000c.The reactants required for regeneration plant are Iron Chloride and Spend Acid vapourises and breaks down into H2O and Acid. Iron Chloride also breaks down into Iron Oxide and Chlorine.

The Chlorine reacts with the water to produce Hydro Chloric Acid (HCL). Here the ....etc

[:=Read Full Message Here=:]