This article is presented by:
D. Chandrasekharam
Department of Earth Sciences
Indian Institute of Technology
Bombay 400076, India
GEOTHERMAL ENERGY RESOURCES OF INDIA: COUNTRY UPDATE

ABSTRACT
All the geothermal provinces of India are located in areas with high heat flow and geothermal gradients. The heat flow and thermal gradient values vary from 75–468 mW/m2 and 59–234°C respectively. Additional exploration studies and reservoir modelling have ....etc

[:=Read Full Message Here=:]

CONSTRUCTION SAFETY CLIMATE
IN DEVELOPING COUNTRY
BIKARAMA PRASAD YADAV
SENIOR HSE- MANAGER
SOMA ENTERPRISES LTD
DMRC PROJECT
Email - [email protected]
Safety in the construction industry has always
been a major issue. Wherever reliable records are
available, construction is found to be one of the
most dangerous on safety and health criteria,
particularly in developing countries. Though much
improvement in construction safety has been
achieved, the industry still continues to lag behind
most other industries with regard to ....etc

[:=Read Full Message Here=:]

download seminar report on 2d barcodes
download seminar report on 2d barcodes
download seminar report on 2d barcodes
download seminar report on 2d barcodes
download seminar report on 2d barcodes
download seminar report on 2d barcodes
download seminar report on 2d barcodes
download seminar report on 2d barcodes ....etc

[:=Read Full Message Here=:]

When police, fire or ambulance personnel receive an emergency call, they must pinpoint its place of origin in order to respond quickly. When such a call is made from a cellular phone, its place of origin can be determined by using GPS or a cell-based positioning method. However, these methods are sometimes inaccurate and have blind spots. We developed a system for determining location using RFID-reader- equipped cellular phones and RFID tags. We outline the prototype system here ....etc

[:=Read Full Message Here=:]

STUDYING THE PROCUREMENT MANAGEMENT SYSTEM IN CROSS COUNTRY NATURAL GAS PIPELINE PROJECTS & SUGGEST TECHNIQUE FOR IMPROVE THE PROCESS
Executive summary
The project title is “Studying the procurement management system in Cross Country Natural Gas pipeline projects & suggest techniques to improve the process”. This report is divided in five main parts. First is introduction about company GSPL and industry in which GSPL is working. Second tells about the different project activities in a project. Third chapt ....etc

[:=Read Full Message Here=:]

....etc

[:=Read Full Message Here=:]

we need all the details(pin diagram, abstract,introduction,block diagram, work flow, description, project modules) about the topic PINPOINTING THE PLACE OF ORIGIN OF AN EMERGENCY CALL USING GPS.... ....etc

[:=Read Full Message Here=:]

1.The angle between two curved lines is known as :
(A)Spherical angle
(B) Obtuse angle
(C ) Acute angle
(D) Deflection angle

2.Which of the following is the classification based upon the system of surveying ?
(A)Chain surveying
(B)Triangulation surveying
(C )City surveying
(D)Mine surveying

3.The survey that does not deal with mapping of large water bodies is :
(A)Hydrographic Survey
(B)Navigation Survey
(C )Marine Survey
(D)Cadastral Survey

4.During the office work, surveyor does :
(A)Design of struct ....etc

[:=Read Full Message Here=:]

i want ppt on origin and destination .
in this i want itroduction, metods and presentation of o and d data
....etc

[:=Read Full Message Here=:]

155/2015
Maximum : 100 marks
Time : 1 hour and 15 minutes

1.The maximum twisting moment a shaft can resist, is the product of the 
permissible shear stress and:
(A)Moment of inertia
(B) Polar moment of inertia
(C ) Polar modulus
(D) Modulus of rigidly

2.A beam of length L is pinned at both ends and is subjected to a 
concentrated bending couple of moment M at its centre. The maximum bending 
moment in the beam is :
(A)ML/2
(B)M
(C )M/3
(D)M/2

3.In plastic analysis, the shape factor for a triangular ....etc

[:=Read Full Message Here=:]