please can anyone mail the complete project details along with the code to [email protected] ....etc

[:=Read Full Message Here=:]

Modeling and Performance Analysis of Automatic
Meter Reading Systems Using Power Line
Communications


B. Sivaneasan, P. L. So, Senior Member, IEEE, and E. Gunawan, Member, IEEE
School of Electrical and Electronic Engineering
Nanyang Technological University



Abstract—This paper presents an analytical model to study the
performances of two schemes for automatic meter reading
(AMR) systems using power line communications (PLC) access
networks. These two schemes, namely clustered simple polling
(CSP) an ....etc

[:=Read Full Message Here=:]

AUTOMATIC METER READING SYSTEM

INTRODUCTION
This is a device to control the speed of fan and coolers automatically. The device presented here makes the fan run at a full speed for pre determined time. This speed is decreased to medium after some time and to slow then onwards after a period of 8 hours, the fan or cooler is switched off.

The circuit consist of IC1 (555 Timer IC) which is used as an astable multi vibrator used to generate clock pulses. These are fed to decade dividers or counters formed by IC2 an ....etc

[:=Read Full Message Here=:]

Highly Person dependant.
Human errors cannot be avoided.
Energy Audits performed based on bill collection which is highly inaccurate.
Billing done mainly on estimated/ monthly average basis
Inability to monitor and control discrete loads
Billing cycle requires excessive time.
Meter data used only for billing, cannot help in analysis like demand analysis, energy audit, pinpointing losses, etc.
ABSTRACT
Automatic meter reading is needed to provide benefits to customer,
utilities and government and Automatic m ....etc

[:=Read Full Message Here=:]

Abstract:
RF based Automatic meter reading, or AMR, is the technology of automatically collecting data from energy meter and transferring that data to a central database for billing and/or analyzing. This means that billing can be based on actual consumption rather than on an estimate based on previous consumption, giving customers better control of their use of electric energy. The Transmitter is connected to the meter and it counts the pulses from it and displays it over the LED display. It also transmit the data over RF. The dataâ� ....etc

[:=Read Full Message Here=:]

AUTOMATIC METER READING SYSTEM

Contents
Issues with stand alone metering
Smart Metering and IT: An opportunity to Leapfrog
Critical Benefits from AMRS
Definition
AMR network architecture
GSM Based Communication
PLCC based Communication
Network Architecture/Hybrid Communication
Primary components
PLCC / GSM Modem
Inbound Outbound Dialing
Advantages
....etc

[:=Read Full Message Here=:]

Currently the appearance of really low power wireless transceivers at very low prices is motivating the development of many wireless applications out of the industrial field, which up to now turn to be large in size and expensive. We present the design of a tiny and low cost Wireless Weather Station to measure accurate temperature (±0.1ºC), relative humidity (±3%), light intensity and atmospheric pressure (±0.8hPa). These direct climatic variables and others indirectly attainable, like the dew-point, wind chill, ....etc

[:=Read Full Message Here=:]

Automatic meter reading (AMR) is the technology of automatically collecting data from energy metering devices (water, gas, and electric) and transferring that data to a central database for billing and/or analyzing ....etc

[:=Read Full Message Here=:]

i have no idea about this project so i request you to send me all details about this project. please send datd fast










thank you.... ....etc

[:=Read Full Message Here=:]

GSM Based Automatic Energy Meter Reading
The purpose of this project is to remote monitoring and control of the Domestic
Energy meter. This system enables the Electricity Department to read the meter readings
regularly without the person visiting each house. This can be achieved by the use of
Microcontroller unit that continuously monitors and records the Energy Meter readings in
its permanent (non-volatile) memory location. This system also makes use of a GSM
modem for remote monitoring and control of Ene ....etc

[:=Read Full Message Here=:]