Explanatory Examples on Indian Seismic Code IS 1893


Problem Statement:
Consider a four-storey reinforced concrete office building shown in Fig. 1.1. The building is located in
Shillong (seismic zone V). The soil conditions are medium stiff and the entire building is supported on a raft
foundation. The R. C. frames are infilled with brick-masonry. The lumped weight due to dead loads is 12
kN/m2 on floors and 10 kN/m2 on the roof. The floors are to cater for ....etc

[:=Read Full Message Here=:]

1. Auto turn off water pump with four different time slots using PSOC Mixed Signal Array
2. Proximity Sensor based intelligent Security system using PSoC mixed signal array
3. RFID access with PSoC mixed signal array
4. RF based Wireless Industrial Device control using PSOC Mixed Signal Array
5. Light intensity based Street light automation using PSOC Mixed Signal Array
6. Implementing loopback SPI protocol using PSoC mixed signal array
7. Capsense based Industrial appliances control system with PSoC mixed signal array
8. Accelerometer ....etc

[:=Read Full Message Here=:]

INTEGRATING KEIL 8051 TOOLS INTO THE SILICON LABS IDE

Introduction


This application note describes how to integrate the
Keil 8051 Tools into the Silicon Labs IDE
(Integrated Development Environment). It applies
to Version 1.4 of the Silicon Labs IDE. Integrating
Keil 8051 Tools into the Silicon Labs IDE provides
an efficient development environment with
compose, edit, build, download and debug
operations integrated into the same program.
Key Points
• The Intel OMF-51 absolute object file g ....etc

[:=Read Full Message Here=:]

Hi, I am Juan. My therapist tells me I have imparted abstract thinking. Can you provide examples of impaired abstract thinking. It makes no sense to me ....etc

[:=Read Full Message Here=:]

i want to know more information about the dsp lab
so i need some viva questions which are conceptual ....etc

[:=Read Full Message Here=:]

LABS GURU



Introduction
Now a days DC motor plays a vital role in most of the industrial areas, it can be seen in most of the
electronic devices. They are mainly used for the mechanical movements of physical applications
such as rolling the bundle of sheets or CD drives, lifts etc.
Many methods evolved to control the revolution of a motor. DC motors can be controlled either
by software or directly by hardware. Software controlling needs computers which a ....etc

[:=Read Full Message Here=:]

EXAMPLES ON LINEARIZATION



Consider the electromagnetic suspension system shown in the figure. An electromagnet is
located at the upper part of the experimental system. Utilizing the electromagnetic force f,
we desire to suspend the iron ball. Note that this simple electromagnetic suspension
system is essentially unworkable. Hence feedback control is indispensable. As a gap
sensor, a standard induction probe of eddy current type is placed below the ball.


[b ....etc

[:=Read Full Message Here=:]

I want to learn about programming codes for wireless sensor network for creating simple sensor network, discovering surrounding neighbor nodes,listing their buffer sizes,and updating the buffer utilization for packet forwarding, and routing packets based on their available unused buffer space. Is there anyone who can help me? ....etc

[:=Read Full Message Here=:]

HEATSINK CALCULATION AND EXAMPLES
In many cases, GS-Rx and GSxTy-z modules don’t require any additional cooling methods because the dimensions and the shape of the metal boxes were studied to offer the minimum possible thermal resistance case to ambient for a given module. It should be remembered, that GS-R and GS-T modules are power devices i.e. products that deliver power and dissipate power and, depending on ambient temperature, an additional heat-sink or forced ventilation or both may be required to ....etc

[:=Read Full Message Here=:]

Abstract—
In this paper, we address the problem of nonlinear
sensor dynamic compensation that will be performed on board
wireless sensor network nodes. To this aim, we design suitable
reduced-complexity learning-from-example algorithms and implement
them on resource-constrained devices, namely, 8-bit
microcontrollers. The proposed approach is validated with simulations
on different examples of nonlinear sensor models.
Index Terms—Dynamic compensation, low power, microcontroller
implementation, reduced-set methods, support v ....etc

[:=Read Full Message Here=:]