1. Design and simulation of crown assembly
2. Fabrication of automatic water level controller for Over head tank
3. Design of connecting rod and analyses in Ansys
4. Fabrication of windmill and controlling the Direction
5. Fabrication of Bernoulli’s experiment apparatus
6. Fabrication of object sorting based on material
7. Fabrication of fork lift system through automation (forklift robo)
8. Fabrication of quick change tool post
9. Intelligent unmanned railway level crossing.
10. Fabrication of orifice and mouth piece test apparatus ....etc

[:=Read Full Message Here=:]

ITER - the way to new energy

INTODUCTION
ITER “INTERNATIONAL THERMONUCLEAR EXPERIMENTAL REACTOR.
ITER is a large-scale scientific experiment that aims to produce electricity from NUCLEAR FUSION.
Q = 10 represents the scientific goal of the ITER project: to deliver ten times the power it consumes.
The same principle of sun is used to produce heat in ITER plant.

WHAT IS FUSION
Fusion is the process at the core of our Sun.
In the core of our Sun, temperatures reach 15 000 000� ....etc

[:=Read Full Message Here=:]

INTRODUCTION
Steam ejectors are designed to convert the pressure energy of a motivating fluid to velocity energy to entrain suction fluid and then to recompress the mixed fluids by converting velocity energy back into pressure energy. This is based on the theory that a properly designed nozzle followed by a properly designed throat or venturi will economically make use of high pressure fluid to compress from a low pressure region to a higher pressure. This change from pressure head to velocity head is the basis of th..............etc

[:=Read Full Message Here=:]

ABSTRACT
We all know that food is a basic need for our living and now a day we often hear and observe famine all around the world. The word famine in the above sentence means low production of hygienically produced foods and vitamin foods .we all know that it is useful to build and maintain our body and provide them useful vitamin and carbohydrates etc¦.
Retail presentation of preserved foodstuffs is an ancient art. Freeze drying is a modern method, which has come in to the role for preserving food ....etc

[:=Read Full Message Here=:]

AUTOMATIC TEMPERATURE CONTROL IN VACUUM BRAZING FURNACE USING P.L.C

ABSTRACT
The main objective of this project is to maintain & control temperature uniformly of the two zones in vacuum brazing furnace and braze similar or dissimilar components using certain chemicals, for the given specifications of a job
Brazing alloys used for brazing the components of gas turbines and aerospace applications contain nickel as the base material. Nickel has highest affinity for oxygen. Incase if components are brazed using nickel ....etc

[:=Read Full Message Here=:]

ABSTRACT
When objects move through air, forces are generated by the relative motion between the air and surfaces of the object. Aerodynamics is the study of these forces, generated by the motion of air, usually aerodynamics are categorized according to the type of flow as subsonic, hypersonic, supersonic etc.
It is essential that aerodynamics be taken in to account during the design of cars as an improved aerodynamics in car would attain higher speeds and more fuel efficiency. For attaining this ae ....etc

[:=Read Full Message Here=:]

If You Want More Information Please reply Below

1. A comprehensive water management plan

2. A New Method to Determine Plastic Limit of Soil

3. A Relation between COD and BOD for the textile,

4. Advanced Earthquake Resistant Techniques

5. Advanced Pavement Design

6. Advanced Technology in Sewage Treatment & Nutrient Removal

7. advancement in geotechnical engg. with geo

8. Air pollution & its control

9. Alum Recovery By Acidulation of Aluminum Hydroxide Sludge

10. Alum With ....etc

[:=Read Full Message Here=:]

1. A comprehensive water management plan

2. A New Method to Determine Plastic Limit of Soil

3. A Relation between COD and BOD for the textile,

4. Advanced Earthquake Resistant Techniques

5. Advanced Pavement Design

6. Advanced Technology in Sewage Treatment & Nutrient Removal

7. advancement in geotechnical engg. with geo

8. Air pollution & its control

9. Alum Recovery By Acidulation of Aluminum Hydroxide Slud ....etc

[:=Read Full Message Here=:]

INTRODUCTION
Steam ejectors are designed to convert the pressure energy of a motivating fluid to velocity energy to entrain suction fluid and then to recompress the mixed fluids by converting velocity energy back into pressure energy. This is based on the theory that a properly designed nozzle followed by a properly designed throat or venturi will economically make use of high pressure fluid to compress from a low pressure region to a higher pressure. This change from pressure head to velocity head is the basis of th ....etc

[:=Read Full Message Here=:]

to get report/presentation and design details of each project topic please browse through this page http://studentbank.in/topic-mechanical-engineering-project-ideas

1. AUTO DRAIN VALVE WITH AIR DRIER FOR COMPRESSOR
2. AUTO HAMMER STRIKER
3. AUTO SIDE STAND INDICATOR AND CENTER STAND
4. AUTOMATIC LUBRICATING MACHINE
5. AUTOMATIC DIMENSIONING MACHINE
6. AUTOMATIC DISC PARKING SYSTEM
7. WIND MILL PROJECT
8. WIND MILL WATER PUMP
9. AUTOMATIC DRILLING AND TAPPING MACHINE
10. AUTOMATIC GEAR CHANGER
11. ....etc

[:=Read Full Message Here=:]

Vaccum Brake System
The vacuum brake is a braking system employed on trains and introduced
in the mid-1860s. A variant, the automatic vacuum brake system, became
almost universal in British train equipment and in those countries influenced
by British practice. Vacuum brakes also enjoyed a brief period of adoption
in the USA, primarily on narrow gauge railroads. However, its limitations
caused it to be progressively superseded by compressed air systems starting
in the United Kingdom from the 1970s onward. The vacuum brake system is..............etc

[:=Read Full Message Here=:]

AUTOMATIC TEMPERATURE CONTROL IN VACUUM BRAZING FURNACE USING P.L.C

ABSTRACT
The main objective of this project is to maintain & control temperature uniformly of the two zones in vacuum brazing furnace and braze similar or dissimilar components using certain chemicals, for the given specifications of a job
Brazing alloys used for brazing the components of gas turbines and aerospace applications contain nickel as the base material. Nickel has highest affinity for oxygen. Incase if components are brazed using nickel ..............etc

[:=Read Full Message Here=:]

1. Particle Reinforced Aluminium Matrix Composites
2. Phytoremediation
3. Plant-made pharmaceuticals
4. Membrane Bioreactors (MBR)
5. Noise Pollution and Control in Chemical Industry
6. Air permit
7. Industrial PVC Formulation
8. Fluorescence Spectroscopy
9. Polarography
10. Concentrating Solar Power
11. Chemometrics
12. Wind Power in France
13. Biological Applications Of Macromolecules
14. Fluorimetry
15. Future for Next Generation of Nuclear Power Plants
16. Radiation Processing of Polymers
17. Inventory and Flow Control in Co ....etc

[:=Read Full Message Here=:]