Investigatory projects on hollow prisms...............etc

[:=Read Full Message Here=:]

FINITE ELEMENT ANALYSIS ON ANGLE PLATE
ABSTRACT
The finite element method (FEM) (sometimes referred to as finite element analysis) is a numerical technique for finding approximate solutions of partial differential equations (PDE) as well as of integral equations. The topic of the seminar includes the study of Finite Element Analysis and a case study of finite element analysis.
A double angled web connection is modeled and analyzed to predict the behavior of the angle plate using finite element analysi ....etc

[:=Read Full Message Here=:]

LABORATORY INVESTIGATION OF LOW SWIRL INJECTOR FOR LEAN PRE-MIXED GAS TURBINES


SEMINAR REPORT Submitted by
KIRAN .G.
S7M2
ROLL NO-30
Department Of Mechanical Engineering
College of Engineering, Thiruvananthapuram – 16
OCTOBER 2010




ABSTRACT

Laboratory experiments have been conducted to investigate the fuel effects on the

turbulent premixed flames produced by a gas turbine low-swirl injector (LSI). The

lean-blow off li ....etc

[:=Read Full Message Here=:]

To investigate the dependence, of the angle of deviation, on the angle of incidence, using a hollow prism filled, one by one, with different transparent fluids...............etc

[:=Read Full Message Here=:]

Study and Modeling of the Mechanical Behavior of Hexagonal Metals

Introduction
Hexagonal close-packed (hcp) metals deform plastically by a variety of slip and twinning modes. The relative contribution of these mechanisms depends strongly on the material studied and the conditions, such as temperature, under which the deformation is performed. This work further elucidates the complicated competition and interactions between twinning and slip deformation modes for two hcp materials, namely zirconium and magnesium. The model presented here to ....etc

[:=Read Full Message Here=:]

relation between the ratio of output and input voltage,no. of turns in secondary coil and primary coil ..............etc

[:=Read Full Message Here=:]

PURPOSES
1. Investigate the influence of MAV wing shape on aerodynamical characteristics
2. Investigate the influence of profile shape and winglets on aerodynamical MAV characteristics
3. Investigate the influence of powerplant on aerodynamical MAV characteristics
4. Investigate the influence whole MAV design on aerodynamical MAV characteristics
5. Investigate possibility of numerical investigation of pressure distribution
6. Compare the results of wing tunnel and flight experiments ....etc

[:=Read Full Message Here=:]

EXECUTIVE SUMMERY
INTRODUCTION
This thesis deals with questions concerning corporate capital structure. It examines show Della tecnica company will decide his capital structure in a real life context. It also examines if there is room for improvement when the company decide upon their capital structure. Finally, it presents our conclusion based on the case studies Modern corporate finance theory was born with the publication of Modigliani and Millerâ„¢s (M&M) theoretical model about capital structure in 1958. ....etc

[:=Read Full Message Here=:]

Non-Linear Analysis and Design of Perforated Thin-walled Steel Strutures

Introduction
Perforated thin-walled steel structures are widely used, however, current design guidelines for them are limited to very few specific cases.
The seminar will try to describe a proposed method to develop new design guidelines for this kind of structures by using the Direct Strength Method (DSM) which is a fast and easy design method for cold-formed steel structures, with great potential for complex and optimized cross sections.

Based on the recently de ....etc

[:=Read Full Message Here=:]

UBIQUITOUS ROBOT
-THE THIRD GENERATION OF ROBOTICS
ABSTRACT
This paper introduces ubiquitous robot (Ubibot) as a third generation of robotics, incorporating three forms of robots: software robot (Sobot), embedded robot (Embot) and mobile robot (Mobot), which can provide us with various services by any device through any network, at any place anytime in a ubiquitous space.
Sobot is a virtual robot, which has the ability to move to any place through a network. Embot is embedded within the environment or in t ....etc

[:=Read Full Message Here=:]

ggvbnklkfdudfdhgdfggghghdggfgdgdudufuyffffffffffghhjjjjjiiugffssfghjhdffggfffdfdfffffggh..............etc

[:=Read Full Message Here=:]

please show me the project To investigate the dependence, of the angle of deviation, on the angle of incidence, using a hollow prism filled, one by one, with different transparent fluids...............etc

[:=Read Full Message Here=:]

hellooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo..............etc

[:=Read Full Message Here=:]

ABSTRACT

As the virtual centre of excellence in mobile and personal communications (Mobile VCE) moves into its second core research programme it has been decided to set up a fourth generation (4G) visions group aimed at harmonising the research work across the work areas and amongst the numerous researchers working on the programme. This paper outlines the initial work of the group and provides a start to what will become an evolving vision of 4G. A short history of previous generations of mobile communications systems and a discussion of t ....etc

[:=Read Full Message Here=:]

ABSTRACT
Soil stabilization can be done in many ways. But the stabilization using waste plastic fibers is an economic method since the stabilizer used here is waste plastic materials, which are easily available. This report presents the various tests conducted on fiber reinforced soil with varying fiber content and their results are analyzed such that weather it can be used in the field.
Literature reviews discuss tests like CBR test, shear strength test, consolidation test, swelling test, shrinkage limit, desiccation cracks and hydr ....etc

[:=Read Full Message Here=:]

1. INTRODUCTION
Conventional vibrated stone columns are typically used to improve the engineering properties of soft soils for the support of lightly and moderately loaded structures such as motorway embankments and large diameter storage tanks. The technique generally comprises replacing soft soil with columns of crushed rock gravel that act to stiffen the soil mass, increasing stability and reducing the time rate of consolidation. Although generally considered to be suited to soils with undrained shear strengths (su) abo ....etc

[:=Read Full Message Here=:]