Implementation of a simple device mediation application of a Network Management System


Abstract
In a typical NMS scenario a network service provider will have thousands of network elements of different kinds like eg, switches, routers, bridges, gateways and also of various makes eg, Cisco, Juniper, Nortel, etc. All these network elements would like to collect data spewed out by these elements. This data will be analyz..............etc

[:=Read Full Message Here=:]

Abstract
GPS enabled PC based geographic information system (GIS) and routing scheduling system
GPS enabled PC based geographic information system (GIS), routing and scheduling system is used for tracking the position of the given objects, the platform front-end employ Embedded devices; the background uses high-performance Servers. The system main apply embedded development, GIS, GPS and wireless transmission technology to realize collection, Display, query, editing, analysis, path planning, navigation, Poi..............etc

[:=Read Full Message Here=:]

respected sir i am md furkhanuddin i saw seminar topic on Emerging Communications Technologies and their impact on Military Communication Systems plz send me the full report to [email protected] i will be thankfull to you
thank you sir

..............etc

[:=Read Full Message Here=:]

This is sreehari... 3rd B.Tech,ECE..... Please provide the information about Emerging Communications Technologies and their impact on Military Communication Systems..............etc

[:=Read Full Message Here=:]

Implementation of a simple device mediation application of a Network Management System

In a typical NMS scenario a network service provider will have thousands of network elements of different kinds like eg, switches, routers, bridges, gateways and also of various makes eg, Cisco, Juniper, Nortel, etc. All these network elements would like to collect data spewed out by these elements. This data will be analyzed for Faults, Configuration, Accounting, Per..............etc

[:=Read Full Message Here=:]

New methodological framework to improve productivity and ergonomics in assembly system design




1. Introduction and literature review
Generally, an assembly line could be dedicated to produce
a single product model or multiple product models, where many
items could be processed simultaneously in batches or handled in
lot sizes of one item for each product model. Three main kinds of
Assembly Line Balancing Problem (ALBP) are represented in literature
(Becker and Scholl, 2006 and Scholl, 1995):

Sing..............etc

[:=Read Full Message Here=:]

Presented by:
M.N.N.V.SAIRAM
M.SUBRAMANYAM KUMAR
G.RAHUL VARMA


Preamble-based SNR Estimation in Frequency Selective Channels for Wireless OFDM Systems
AIM:
To develop an efficient algorithm for the average SNR estimation in wireless OFDM systems.
BACK GROUND:
• OFDM is a multicarrier modulation scheme that provides strong robustness against inter symbol interference (ISI) by dividing the broadband channel into many narrowband sub- channels in such a way that attenuation ..............etc

[:=Read Full Message Here=:]

Development of a feature-rich, practical online on-request courses coordination system (ORS)
This project is aimed at developing an online on-request courses coordination system that is of importance to an IT organization which has a training department of its own. The online on-request courses coordination system (ORS) is an Intranet based application that can be accessed throughout the organization or a specified group/Dept. This system can be used to auto..............etc

[:=Read Full Message Here=:]

Preamble-based SNR Estimation in Frequency Selective Channels for Wireless OFDM Systems
Synopsis
Introduction
There are two general categories of average SNR estimators. Data-aided (DA) estimators are based on either perfect or estimated knowledge of the transmitted data. However, a certain portion of data is needed for estimation purposes, which reduces bandwidth efficiency. Blind or in-service estimators derive SNR estimate from an unknown information-bearing portion of the received signal preserving efficiency a..............etc

[:=Read Full Message Here=:]

The CAD Library or PCB library
Presented By:Tom Hausherr
Director of TechnologyPCB Libraries, Inc.

INTRODUCTION

Every electronic component requires a solder land pattern for PCB layout. The solder pattern can be placed into two categories…..

Meet all the industry standard requirements for the sole purpose of electronic product automation.

2. Fail to meet the industry standard requirements and create electronic product creation chaos..............etc

[:=Read Full Message Here=:]