i need this pdf file can you please make it available for me. thanx..............etc

[:=Read Full Message Here=:]

Power Factor Correction of Linear and Non-linear Loads Employing a Single Phase Active Power Filter Based on a Full-Bridge Current Source Inverter Controlled Through the Sensor of the AC Mains Current
Abstract:
In the last years the number of non-linear loads has been increasing rapidly. This non-linear load had drawn a current form the AC Mains with harmonic components, leading to low power factor, low efficiency, interference by the EMI, among others. A classic solution is the use of passive filters, which ..............etc

[:=Read Full Message Here=:]

I WANT THIS URGENTLY FOR SMART CLASS BOARDS PRESENTATION...............etc

[:=Read Full Message Here=:]

Procedure:-
1) Find the length of the first sequence x=x_length
2) Find the length of the second sequence h=h_length
3) Estimate the number of samples in the result of linear convolution of x &h=Y_length
4) If X_length 5) If h_length 6) Take DFT for modified x=x(k)
7) Take DFT for modified h=H(k)
8)..............etc

[:=Read Full Message Here=:]

Variable Voltage And Variable Frequency drives

Presented By:
P.NATARAJU S.E.V.S.RAGHU VARMA
3rd year E.E.E. 3rd year E.E.E.

Abstract:-
Our varying industrial needs demand more precise control of the outputs of our basic electrical prime movers i.e, THE MOTORS. Basically dc motors are easy to control compared to their ac counter parts, but they have their own limitations with increase in capacity. Conversely ac motors in particular squirrel cag..............etc

[:=Read Full Message Here=:]

what is meant by adaptive pixel pair matching..............etc

[:=Read Full Message Here=:]

INTRODUCTION
DEFINE :- A pair of linear equations in two variables is said to form a system of simultaneous linear equations
The general form of pair of linear equations in two variables x and y is :-
a1x + b1y + c1 = 0
a2x + b2y + c2 = 0
METHODS
The Algebraic Methods of solving simultaneous pair Linear Equations in Two Variables are :-
1) METHOD OF ELIMINATION BY SUBSTITUTION
2) METHOD OF ELIMINATION BY EQUATING THE COEFFICIENTS
3) METHOD OF CROSS-MULTIPLICATION
..............etc

[:=Read Full Message Here=:]

Plzz give a project on linear equation in two variables for class 10..............etc

[:=Read Full Message Here=:]

Procedure:-
1. Read the input sequence, x and plot
2. Read the impulse response of the system, h and plot
3. Convolve the two results and plot them
Description:-
Linear Convolution involves the following operations.
1. Folding
2. Multiplication
3. Addition
4. Shifting
These operations can be represented by a Mathematical Expression as follows:
y =  xh

x= Input signal Samples
h= Impulse response co-efficient.
y= Convolution output.
n = No. of Input sample..............etc

[:=Read Full Message Here=:]

Seminar report on application of higher and lower pair joints..............etc

[:=Read Full Message Here=:]