ABSTRACT
A specially designed producer gas carburetor is comprehensively analyzed for its mixing performance and response with a CFD modeling. The model is made up of a mixer chamber that has the essential orifices for air and fuel (producer gas) inlets to generate stable stoichiometric mixture at near to ambient conditions using the induction of the engine as the driving pressure differential for the flow, and tested for a case of engine of 25 kWe capacity.The CFD simulations are carried out followed with experimental studies to valid..............etc

[:=Read Full Message Here=:]

GPU Implementation of Extended Gaussian Mixture Model for Background Subtraction



What is GPU Computing?


GPU computing or GPGPU is the use of a GPU (graphics processing unit) to do general purpose scientific and engineering computing.

The model for GPU computing is to use a CPU and GPU together in a heterogeneous co-processing computing model. The sequential part of the application runs on the CPU and the computationally-intensive part is accelerat..............etc

[:=Read Full Message Here=:]

ABSTRACT

This paper describes in detail, field experiments performed on a single-phase, distribution transformer to study the behavior of transformer terminal parameters during internal winding faults. A custom-built transformer provided with external taps was used for these tests. The taps were used to stage various internal winding faults in the transformer. Terminal values of voltages and currents were monitored and the results presented. A comparison of these results with simulation results is also presented


Presented By:
Palm..............etc

[:=Read Full Message Here=:]

E85 is an alcohol fuel mixture of 85% ethanol and 15% gasoline, by volume. ethanol derived from crops (bioethanol) is a biofuel.
E85 as a fuel is widely used in Sweden and is becoming increasingly common in the United States, mainly in the Midwest where corn is a major crop and is the primary source material for ethanol fuel production.
E85 is usually used in engines modified to accept higher concentrations of ethanol. Such flexible-fuel engines are designed to run on any mixture of gasoline or ethanol with up to 85% ethanol by volume. The pr..............etc

[:=Read Full Message Here=:]

Modeling of Gasoline Direct Injection Mixture Formation Using
KIVA-3V: Development of Spray Breakup & Wall Impingement
Models and Validation with Optical Engine Planar
Laser Induced Fluorescence Measurements.

ABSTRACT
The computational code KIVA-3V has been used as the modeling platform for Gasoline Direct Injection enginesimulations. Improved models for fuel injection, wall impingement and stratified combustion have been implemented.To complement the modeling effort, experimental data of an optical engine has provided extensive ..............etc

[:=Read Full Message Here=:]

design and fabrication of air operated mirror cutting machine



abstract



the aim of the project is to design and fabricate the air operated mirror cutting machine. cutter is a common tool used in various cutting shape for a variety purposes. in this project, a glass cutter is provided which can form, using a wheel, a uniform crack in glass even when a projection or an earlier-formed scribe line is present on the glass. when the wheel is moved on the glass, a fracture layer is formed causing a rib mark to be formed below the fracture..............etc

[:=Read Full Message Here=:]

Hi,
We want to start an robotic project for coil winding
We dont know the basic information about the robotic
Can you please explain about the robotic in details?
What is robotic?
How to learn the robitic principle?
How i will work in industry?
What can i do, to start the robotic project?
Type of robotic?
Notes for robotic for better understanding ?
How much budjet?
Thanks,
A.Gopanna
..............etc

[:=Read Full Message Here=:]

design and fabrication of air operated mirror cutting machine

abstract

the aim of the project is to design and fabricate the air operated mirror cutting machine. cutter is a common tool used in various cutting shape for a variety purposes. in this project, a glass cutter is provided which can form, using a wheel, a uniform crack in glass even when a projection or an earlier-formed scribe line is present on the glass. when the wheel is moved on the glass, a fracture layer is formed causing a rib mark to be formed below the fracture layer a..............etc

[:=Read Full Message Here=:]

detecting internal FAUlTS IN A TRANSFORMER WINDING
Presented by
RAKHI.M.S
EEE
College Of Engineering, Trivandrum
2007-11 batch



CONTENTS
Objectives
Introduction
Causes and Effects
Existing methods
Ratiometer method
Advantages and Limitations
Conclusion
Reference

OBJECTIVES

To detect the internal faults in a transformer winding
Detection of faults to take corrective measures to prevent interruption during operations
To improve the life expectancy of the trans..............etc

[:=Read Full Message Here=:]

java source code for
Automatic Image Equalization And Contrast Enhancement Using Gaussian Mixture..............etc

[:=Read Full Message Here=:]