Building an economical and competent resource for energy storage, plays a key role in energy conservation as it can cut down the time radically, for both energy supply and energy demand. This innovative concept as crucial as locating fresh sources of energy, can actually enhance the output of the whole energy system there by escalating its consistency.

In phase change materials (PCMâ„¢s) like the salt hydrates, paraffinâ„¢s, non-paraffinâ„¢s and eutectics of inorganic, the storage of solar heat energy, leads to compactness and de..............etc

[:=Read Full Message Here=:]

Presented by:
A.JohnBritto
C.Kanaga Raj
P.Senna Kesavan
A.VinothHEAT TRANSFER PERFORMANCE IN 3D INDUCED FINNED HEAT PIPE

ABSTRACT
3D induced finned steel-water heat pipe is carried out in this project.

All the main parameters that can significantly influence the heat transfer performance of heat pipe ,such as working temperature, heat flux, inclination angle, working fluid fill ratio (defined by the evaporatio..............etc

[:=Read Full Message Here=:]

1. INTRODUCTION
A heat pipe is a simple device that can quickly transfer heat from one point to another. They are often referred to as the superconductors of heat as they possess an extra ordinary heat transfer capacity & rate with almost no heat loss.
The development of the heat pipe originally started with Angier March Perkins who worked initially with the concept of the working fluid only in one phase (he took out a patent in 1839 on the hermetic tube boiler which works on this principle). Jacob Perkins (descendant..............etc

[:=Read Full Message Here=:]

DjtmtjapjmTjdgumjpxjgugumjpupvdmtpgmtpglngjmtpgajptnjgtwjpuwdjgpm..............etc

[:=Read Full Message Here=:]

please do give the details on HRSG since we are opting to take it as the final year project.................etc

[:=Read Full Message Here=:]

IMPROVEMENT OF THERMAL EFFICIENCY BY RECOVERY OF HEAT FROM IC ENGINE EXHAUST
(THERMAL SCIENCES)
CONTENTS:
1. ABSTRACT
2. INTRODUCTION
3. PRINCIPLE OF HEAT RECOVERY FROM IC ENGINE
4. NECESSITY OF THERMAL STORAGE SYSTEM
5. LATENT HEAT THERMAL STORAGE SYSTEM
6. EXPERIMENTAL SETUP
7. RESULTS AND DISSCUSSIONS
8. PERFORMANCE CHARACTERISTICS STUDY
9. CONCLUSION
IMPROVEMENT OF THERMAL EFFICIENCY BY RECOVERY OF HEAT FROM IC ENGINE EXHAUST
ABSTRACT
The steady increased consumption of fuel and power over the years have..............etc

[:=Read Full Message Here=:]

SOLAR HEAT ENERGY STORAGE IN PHASE CHANGE MATERIALS
ABSTRACT
Developing efficient and inexpensive energy storage devices is as important as developing new sources of energy. Energy storage can reduce the time between energy supply and energy demand, thereby playing a vital role in energy conservation. It improves the energy systems by smoothening the output and thus increasing the reliability.
This paper deals with storage of solar thermal energy in materials undergoing phase changes. PCMs, which include salt hydrates, ..............etc

[:=Read Full Message Here=:]

High Conductance Heat Transfer Using Solar Heat Pipe Collector

presented by :-
MR. SHIVAJI D. YADAO1, MR. PRMENDRA J BANSOD2
Dr. D.Y.Patil Institute of Engg. & Tech.,Pune University, Pune,
Dr. D.Y.Patil Institute of Engg. & Tech.,Pune University, Pune,

abstract
In recent years it has become increasingly important to develop methods for efficient transport of thermal energy from one location to another. Moreover the advent of the space age has stimulated research for heat transfer devices which are..............etc

[:=Read Full Message Here=:]

Abstract

A response surface model of the luminous flame emissivity of sodium pool fire has been proposed for use in safety analysis computer codes of a liquid metal fast reactor. The liquid sodium burns in air resulting in not only heat generation but also release of sodium oxide aerosols of sub-micron diameters. Aerosols levitating in air are radiative and they influence the allocation of combustion heat from the flame to atmospheric gas or sodium pool. The emissivity of the flame needs to be quantified, as it is one of user-specified param..............etc

[:=Read Full Message Here=:]

Jet impingement heat transfer – Part I: Mean and root-mean-square heat transfer and velocity distributions
Abstract
Impinging jets provide a means of achieving high heat transfer coefficients both locally and on an area averaged basis. The currentwork forms the first stage of a two part investigation of heat transfer distributions from a heated flat surface subject to an impinging airjet for Reynolds numbers from 10,000 to 30,000 and non-dimensional surface to jet exit spacing, H/D, from 0.5 to 8. In the present paper,the rel..............etc

[:=Read Full Message Here=:]