Power electronics remains an emerging technology. Two important factors in power electronics system are the switching speed of the devices and the total power loss in the system. If the switching speed can be increased ,improvements may be possible i.e. current ripples in an electrical machine or physical size of passive components may be reduced. Increased switching speed may cause additional losses in a power electronics system and increase the system cooling requirement. A common problem is that high-frequency phenomena like proximity eff..............etc

[:=Read Full Message Here=:]

Solutions to Practical Unit Commitment Problems with Operational, Power Flow and Environmental Constraints
Presented By:
I. Jacob Raglend and Narayana Prasad Padhy1


Abstract”
In this paper, an algorithm to solve environmental constrained unit commitment problem (UCP) with operational and power flow constraints has been developed to plan an economic and secure generation schedule. Both Economic load dispatch (ELD) and Economic emission dispatch (EED) have been applied to obtai..............etc

[:=Read Full Message Here=:]

Construction engineering successful graduates will have a good understanding of all facets of construction systems and general contracting. A strong construction need for qualified construction engineering technologists which continues to provide opportunities for program graduates. Typical construction employers include construction firms, government agencies, construction material manufacturers and suppliers, property developers and consulting firms.
Typical construction career positions include.
A)estimator
B)project inter coordinator/man..............etc

[:=Read Full Message Here=:]

i request u to please allow me to download seminar topics on personality development...............etc

[:=Read Full Message Here=:]

sir,
iam akhil kp the student of kmct collage of engineering in calicut.I would like to know more about my seminar topic.And kindly request you to send me the seminar report of calorimetric measuring system,problems and solutions
yours faithfully
signature..............etc

[:=Read Full Message Here=:]

PREPARED BY
MAK


1. INTRODUCTION
• The project is for manufacture of simple engineering spares and for undertaking job work on lathe for turning and welding requirements.
• 3. MANUFACTURING PROCESS
• The manufacturing process depends upon the type of job. Generally, the job includes raw material, cutting, drilling, turning & facing, milling & parting off, inspection and despatch. Diploma in Mechanical Engineering (DME) and ITI (Turner Trade) trained persons can establish these kind of units for ..............etc

[:=Read Full Message Here=:]

85/2014
Maximum : 100 marks
Time : 1 hour and 15 minutes

1. V belt run in-------------------degree v-groove.
(A)60°
(B)55°
(C )29°
(D)40°

2. The -----------------is the operation of forming the edges of a component into roll by bending the sheet metal in order to strengthen the edges and to provide smoothness to its surface :
(A)Bending
(B)Curling
(C )Lancing
(D)Forming

The back gear system of a lathe is used to :
(A)Reduce the spindle speed
(B)Increase the spindle speed
(C )Only used in thread cut..............etc

[:=Read Full Message Here=:]

Abstract
This seminar describes the main issues facing the development of telerobotics systems connected to the Internet. The initial hurdle relates to the definition and implementation of an appropriate communication protocol for delivering real-time data. Two of the solutions proposed in the literature are briefly summarized. Then examines the issues relevant to control systems in the presence of time delay, with particular reference to telerobotic systems with force feedback. The delay introduced by Internet connections have specific charac..............etc

[:=Read Full Message Here=:]

general problem in engineering and technological...............etc

[:=Read Full Message Here=:]

Power electronics remains an emerging technology. Two important factors in power electronics system are the switching speed of the devices and the total power loss in the system. If the switching speed can be increased ,improvements may be possible i.e. current ripples in an electrical machine or physical size of passive components may be reduced. Increased switching speed may cause additional losses in a power electronics system and increase the system cooling requirement. A common problem is that high-frequency phenomena like proximity eff..............etc

[:=Read Full Message Here=:]