DEAR SIR,

I AM THE STUDENT OF MTECH (CAD/CAM) AND I HAVE TO STUDY THE THE SUSPENSION SYSTEM & IN THIS SYSTEM LEAF SPRING PLAYS AN IMPORTANT ROLE. BY CHANGING MATERIAL I WANNA TO CALCULATE & ANALYSE THE CHANGES IN STRESSES & DEFLECTION.

TILL NOW DESIGNING PART OF THE SPRING IS ALMOST DONE BUT MY EFFORT NEED SOME GUIDANCE ABOUT THE SELECTION OF COMPOSITE MATERIAL SO, IF YOU ARE AWARE ABOUT THE WHICH MATERIAL SHOULD I SELECT IN ACCORDANCE WITH APPLICATION & COST. THEN PLEASE GIVE ME SOME INFORMATION REGARDING THIS.

THANKS & BEST REGARDS,
..............etc

[:=Read Full Message Here=:]

i need the analysis pdf for leaf spring.MY PROJECT IS GOING UNDER B.E..............etc

[:=Read Full Message Here=:]

..............etc

[:=Read Full Message Here=:]

ABSTRACT
The subject gives a brief look on the suitability of composite leaf spring on vehicles and their advantages. Efforts have been made to reduce the cost of composite leaf spring to that of steel leaf spring. The achievement of weight reduction with adequate improvement of mechanical properties has made composite a very replacement material for convectional steel. Material and manufacturing process are selected upon on the cost and strength factor. The design method is selected on the basis of mass production.
From t..............etc

[:=Read Full Message Here=:]

Design, Analysis, Fabrication And Testing Of A Composite Leaf Spring


In order to conserve natural resources and economize energy, weight reduction has been the main focus of automobile manufacturers in the present scenario. Weight reduction can be achieved primarily by the introduction of better material, design optimization and better manufacturing processes. The suspension leaf spring is one of the potential items for weight reduction in automobiles as it accounts for 10% - 20% of the unsprung ..............etc

[:=Read Full Message Here=:]

can I have the full report of mentioned topic .


thanks


Amruta mali
..............etc

[:=Read Full Message Here=:]

DESIGN AND ANALYSIS OF A COMPOSITE BEAM FOR SIDE IMPACT PROTECTION OF A SEDAN .


ABSTRACT

Side Impact crashes can be generally dangerous because there is no room for large deformation to protect an occupant from the crash forces. The side impact collision is the second largest cause of death in United States after frontal crash. Day by day increase in the fuel cost and the emission of the smoke from the automobile industry are also the major concerns in the contemporary world, hence the safety, fuel efficiency and emission gas ..............etc

[:=Read Full Message Here=:]

pls send me slides & report about this topic to my mail [email protected]

[:=Read Full Message Here=:]

Definition

In order to conserve natural resources and economize energy, weight reduction has been the main focus of automobile manufacturers in the present scenario. Weight reduction can be achieved primarily by the introduction of better material, design optimization and better manufacturing processes. The suspension leaf spring is one of the potential items for weight reduction in automobiles as it accounts for 10% - 20% of the unsprung weight. This achieves the vehicle with more fuel efficiency and improved riding qualities.

The intro..............etc

[:=Read Full Message Here=:]

Definition

In order to conserve natural resources and economize energy, weight reduction has been the main focus of automobile manufacturers in the present scenario. Weight reduction can be achieved primarily by the introduction of better material, design optimization and better manufacturing processes. The suspension leaf spring is one of the potential items for weight reduction in automobiles as it accounts for 10% - 20% of the unsprung weight. This achieves the vehicle with more fuel efficiency and improved riding qualities.

The intro..............etc

[:=Read Full Message Here=:]