NOx REDUCTION BY FUEL WATER EMULSION INJECTION
Jithin Syam P.S
S7 Mechanical-A
Roll No:20



Overview
History
Formation and harmful effects of NOx
Reduction Techniques of NOx
Water fuel emulsification technique
Method of injection
Advantages and Dis advantages.

History
The nitrogen oxide reduction technology based on fuel water emulsion injection (FWE), developed by MAN B&W Diesel.
Formation of NOx
Prompt NOx
Frequently obser..............etc

[:=Read Full Message Here=:]

Presented by:
MANIVANNAN .R
GOWRI SHANKAR D.T.


ABSTRACT
Although current systems relay almost exclusively on mixture formation outside the combustion chamber, concept based on internal mixture formation. With the fuel being injected directly into the combustion chamber were actually the foundation for first gasoline injection system. As there system are superb instruments for achieving further reductions in fuel consumption. There are now becoming an increasingly significant factor.
Gasoline..............etc

[:=Read Full Message Here=:]

Please post any 5 sentences in sanskrit on the topic pollution..............etc

[:=Read Full Message Here=:]

Abstract-
A pulse skipping control strategy is proposed to improve efficiency of grid-tied inverters at light loads. To maximize the efficiency of pulse skipping operation mode, three key parameters are identified and optimized based on a loss model, which is developed to find the maximal efficiency points using a three-dimensional search technique. A 200W prototype inverter was setup to verify the proposed control strategy. The experimental results show that the proposed pulse skipping control strategy greatly impr..............etc

[:=Read Full Message Here=:]

digrams regarding the topic..............etc

[:=Read Full Message Here=:]

EMISSIONS REDUCTION USING HYDROGEN FROM PLASMATRON FUEL CONVERTERS
INTRODUCTION
Now-a-days, pollution has become a major threat to the Environment.
Vehicular exhaust(NOx,CO,HC etc…) are mainly responsible for the pollution.
PLASMATRON fuel converter technology is the new technique introduced in this field to reduce the concentration levels of emissions.
ABOUT PLASMATRON
Engineers have long known that adding hydrogen to gasoline makes an engine run cleaner and more efficiently.
In the mid-1990s, sci..............etc

[:=Read Full Message Here=:]

Efficiency Improvement of WCDMA Base Station Transmitters using Class-F power amplifiers


Muthuswamy Venkataramani



(ABSTRACT)
Universal Mobile Telecommunications Systems (UMTS) is the preferred third generation (3G) communication standard for mobile communications and will provide worldwide coverage, a convenient software technology and very high data rate. The high data rate, especially, requires the use of bandwidth-efficient modulation schemes such as Quadrature Phase Shift Keying (QPSK). But..............etc

[:=Read Full Message Here=:]

IMPROVEMENT OF THERMAL EFFICIENCY BY RECOVERY OF HEAT FROM IC ENGINE EXHAUST
(THERMAL SCIENCES)
CONTENTS:
1. ABSTRACT
2. INTRODUCTION
3. PRINCIPLE OF HEAT RECOVERY FROM IC ENGINE
4. NECESSITY OF THERMAL STORAGE SYSTEM
5. LATENT HEAT THERMAL STORAGE SYSTEM
6. EXPERIMENTAL SETUP
7. RESULTS AND DISSCUSSIONS
8. PERFORMANCE CHARACTERISTICS STUDY
9. CONCLUSION
IMPROVEMENT OF THERMAL EFFICIENCY BY RECOVERY OF HEAT FROM IC ENGINE EXHAUST
ABSTRACT
The steady increased consumption of fuel and power over the years have..............etc

[:=Read Full Message Here=:]

PRODUCTIVITY IMPROVEMENT ON COPY TURNING MACHINE, THROUGH CYCLE TIME REDUCTION
OUR ACHIEVEMENTS
We reduced the cycle time required for a valve on
CT machine from 24 seconds to 22 seconds.
The reduction of 2 seconds in the cycle time has
resulted in following changes.
Monthly turnover increased by Rs 5,62,500.
Yearly turnover increased by Rs 67,50,000.
AIM OF THE PROJECT
To increase the valve production from 950 to 1050 valves per shift on Copy turning machine by reducing the cycle time require..............etc

[:=Read Full Message Here=:]

submitted by :-
Suhail ahmad mansoori


INTRODUCTION
A boiler is an enclosed vessel that provides a means for combustion heat to be transferred into water until it becomes heated water or steam. The hot water or steam under pressure is then usable for transferring the heat to a process. Water is a useful and cheap medium for transferring heat to a process. When water is boiled into steam its volume increases about 1,600 times, producing a force that is almost as explosive as gunpowder. This causes the boiler to..............etc

[:=Read Full Message Here=:]